task 1.2 command switchport mode dynamic desirable
hi all, i'm trying to do task 1.2but problem with command switchport dynamic desirable not seen in my switch Rack1SW1(config)#interface range ethernet...
View Article2.2 - Discard Routes
In the solution guide, a route-map is configured on R4 to filter the RIP summary routes from getting redistributed into OSPF. This prevents suboptimal routing. I was wondering if this route-map is...
View Article2.2 R5 loses its connection
I created a Tunnel from R5 to R4 over the serial 0/1/0 interfaces and used "ip unnumbered loopback 0" on each end. I then added ip route 150.15.4.4 255.255.255.255 Serial0/1/0 250 on R5 and ip route...
View ArticleTask 2.2 - Serial Link b/w R4 R5
Instead of redistributing connected on R4 to get the 162.1.45.0/24 subnet into ospf, why not just created a network command for this link instead? I would think this accomplishes the same thing and is...
View Article2.2 IGP Features
Why after do this lab when you run "debug ip routing" on R4 appears this message " Jan 24 06:14:11.207: RT: NET-RED 0.0.0.0/0Rack2R4#Jan 24 06:15:11.207: RT: NET-RED 0.0.0.0/0 ???Thanks
View ArticleTask 2.3 no ping between SW4 and R5.[EIGRP Retry limit exceeded]
I was finishing task when in bullet 4 I noticed i need to send traffic throght SW4 to R5. Problem is SW4 can't ping R5 interface or vise versa. Could it be issue where F0/0 flapping and creating huge...
View ArticleINE Tokens for Sale
I have an extra 1000 tokens for sale as I no longer need them. I dont want to lose too much money on them, so please send me offers.
View ArticleASA 8.42 GNS3 8.3 on Windows 7
FolksHelp I am getting extremely frustrated !!!I have Windows 7 with the lastet GNS3 8.3 with ASA 8.42 am cannot get the ASA to show up in GNS3 network diagram.The error nessage I am getting is...
View ArticleSG correction help needed 9.26
RP address it creates a tunnel interface connecting the router to the RP router. This tunnel isautomatically enabled for multicasting, so multicast traffic sent down the sharedtree is simply forwarded...
View ArticleRe: SG correction help needed 9.26
Thankyou.That is all I ws looking for..that I got it right and now I can move on.Petr wrote the WB I believe and I doubt he's capable of genetically being technically wrong!Just making sure my poor...
View ArticleCCIE Data Center Online Work Book not in CCIE DC Bundle?
So I purchased the CCIE Data Center bundle over the memorial weekend, thinking that I have all the current resources I need to get started on the track. Come to find out that UCS Technology workbook...
View ArticleClik here to view.
Free CCNA Switching Practice Lab
http://www.deepakarora1984.blogspot.in/2013/05/gns-as-network-interview-tool-test-1.html Enjoy
View Article7.1 SNMP.
How come I do not need to set up an SNMP community for this task. EX snmp-ser community CISCOBGP rw
View ArticleConferencing in CUCM
Hi All, I have already set it UP Hardware Conference Bridge , but I see only Conferecing option in CUCM such as1. Meet Me -- (Someone has to press Meet me softkey to activate the Conference)2. AdHoc...
View ArticleTouchdown!
Just passed my SP yesterday, first try.Wouldn't be fair not to thank Brian, the workbooks, the videos and the GNS3 gods; made the process quicker and shorter, a little less than two months in all.Also,...
View ArticleClik here to view.
INE R&S topology working on GNS3 using breakout switch !!
Since I'm a member of INE and have benefited from reading all the forums, I figured it was time for me to share with the community the work I've done in creating a working GNS3 INE R&S working...
View ArticleClik here to view.
QinQ understanding
hi pro, i wanna ask you question about QinQ and L2-tunnel-protocol this is illus i take on Cisco Doc CD about QinQ...
View Article2.1 Rip Summarization
Hi, I was suspicious , SG instructs to do summarization through the BB2 with both ;--Interface level command (which faces to BB2) "ip summary-address rip 163.1.0.0 255.255.192.0""ip summary-address rip...
View Article2.1 - use distance 255 instead of filtering?
In the RIP task on 2.1 on R4 where we are not supposed to accept any RIP updates from BB2 the SG uses a distribute list to filter the updates. However i applied the command 'distance 255 192.10.1.254...
View Article