Weird Problem
Hi guys,Sorry for thepuzzlingpost header, but I couldn't find any other one. The following behaviour happends to me during VOLII LAB1: ^ No any connectivity between SW4 and SW1 VLAN 107 whatsoever. Any...
View ArticleATC class - 10th Dec
Hi,do you have access to this live class ? My link in member zone disappeared 15 before start timeI tried below one but no success:http://members.ine.com/dash/live/course/2#Is that correct link...
View Articlebfd with GNS3
Deos anyone know the fix for this issue? When i try to enable bfd for my interfaces on ospf the router crashes, i have tried to change the iso with no luck, i get:-Traceback=%SYS-2-INSCHED: idle within...
View ArticleLAB CONFIGURATION RULES FOR A SPECIFIC TASK
Hello Guys,I am currently preparing for my lab exam in few weeks, now what i want to know is that say if you are given a task and they stated all the rules say you must not configure aggregation for...
View ArticleBasic Data center rack up to 8 tokens per hour?
Basic Data center rack up to 8 tokens per hour?
View ArticleAccess Home Lab Remotely
Dears, I have an Internet Wireless Modem which shows private Ips only to access.Yes it does shows Public DNS Primary and Secondary IPs. Is there any way that I connect my Wireless Modem to 2511 Acess...
View Articletshoot lab 4 vol 2 - ticket 5
I am having problems to understand the task, the task ask for:BGP AS 11 cannot reach the Loopback0 subnets of R3, R5 and SW1. but when I check the R1- AS11 I can reach both loopback0...
View ArticleTask 6.1
I was trying to understand the task.....but my main problem is the direction of the packets...the task says:Apply filtering to the VPN traffic exchanged between R4 and R6.• The Frame-Relay connection...
View ArticlePrep for written - From CCIE R&S -> CCIE SP.
Hello All, I am starting on the SP journey after passing my CCIE R&S on November 5th.I had some questions about resources and I wanted to get some feedback aswel as an idea of how much of a gap...
View ArticlePre-FIP Gen1 CNA
Just wanted to have some info . I was reading a blog there he mentioned that GEN2 Emulex require Trunk mode to be enabled , which is true as we have speprate vlan for data and for SAN traffic. But in...
View ArticleIs anybody preparing DC ccie?
Is anybody preparing DC ccie?I am going to take my lab somedays later. hope to communicate with people who are preparing DC Lab too.
View ArticleVolume II Online workbook comments/notes
I have been going back through the Volume II workbook and I see you can add feedback/comments. Where do we see these comments/feedback/notes from other users? Is anyone else using the online version...
View ArticleUnequal Load Balancing
Working on lab10 in V2 workbook. My exam is in 19 days and I am trying to focus in on details of the task. To me this task sounds like it wants me to setup 5:1 UCLB for traffic destined to the...
View ArticleAn Honest Assessment
Normal 0 false false false EN-GB X-NONE X-NONE I sat my second lab attempt on Tuesday the 3rd December and I did not pass. This hurt me emotionally as I had continued my constant study since my first...
View ArticleTask 2.4 EIGRP
"configure routers in the EIGRP domain to wait up to 5 minutes for a response to an EIGRP query message" Ok this seems pretty straight forward but what if the question wanted an "even" number of...
View ArticleIGMP "host"
I'm reading the 15.3 IGMP docs and I keep reading the term "host" below is the text: IGMP Join ProcessWhen a host wants to join a multicast group, the host sends one or more unsolicited membership...
View ArticleUCS addon: configuration backup
Hi,Could anyone tell me if there is a way to save configuration from a UCS in order to restore it later? On INE racks of course, not in production environment. I know that there is a way to do so via...
View ArticleHow to reset NX-OS grace period timer
Does anyone know of a way to reset the grace period when the time runs out?I found one article for MDS, but it doesn’t sound like it will work for NX-OS.
View ArticleTCLSH Script for Ping and Traceroute with source ?
TCL Ping script below makes life easier ... but, is it possible to include source ip address or interface? Also, with Traceroute? Appreciate any feedback.Router#tclsh +>foreach VAR {...
View Article'(config) ip sla 1' I cannot enter.
R&S Workbook Volume 1 Version 5.03.6 Reliable Static Routing with Enhanced Object TrackingHere is my question.The task requires to set 'ip sla 1' to R4.But it does not work.'ip sla ?' indicates no...
View Article