INE LAB 10.51 workbook 1
Going through this lab mapping the cos 1-4 , 6-7 to queue 2 doesn't match the output in the verification setting when logging at the dscp-input-qthis is from the INE workbook.Rack1SW2#show mls qos maps...
View Articleprocessor and memory for dynamip
G'day all,Could somebody tell me required processor and memory size to run ine dynamip labs?
View ArticleVol 1: Task 3.15 PfR Profile Phase
Hi guys, The last Q in this task asked for manually classfiying traffic class for pref 112.0.0.0/24. In the solutions, they used oer-map with prefix-list to classify this prefix. I used the command...
View ArticleClik here to view.
Advanced Technology Workbook I used to prepare the R&S Written test
Hi allI just finished reading the topics for R&S v4 and I am starting to review them.I am thinking about using the AT Workbook to practice a little bit for this exam.Question: how long do I need...
View ArticleQuestion on Support for INE Full Scale Multi-technology Labs
Folks,I see the note below about lack of support for the INE full scale multi-technology labs on INE racksso what is the workaround for this ?Does it work by adding the addtional H/W from the Control...
View Article2 part question. OSPF/certification support
First off can anyone give me some thoughts on why ospf would let a phone get dhcp from a server on another subnet but not permit the traffic needed for a phone to register on that same subnet as the...
View ArticleAny defect on my initial configurations?
No matter how I precisely configured as the WB says,sometimes my configuration does not reveal the same result. I was wonderingif there should be any mistaken in my initial-OSPF config,everything...
View ArticleTask 6.29 R6 not getting LSA 3 OF AREA-2
Dears, I have configured R3,R6 ,SW1 and SW3 as SG but in SW1 and R6 I can not see the 150.1.8.0,10.0 Etc in SLA 3 .The traffic always goes via R3 .Even If I shut the R3 Ethernet Port the traffic is not...
View Articlel2transport failed command
Hi guys, I have encounter some issues, i am new one on IOS XR and i don't know if i am wrong on sintax or not, but i am following the same as Brian is doing. RP/0/0/CPU0:XR1(config)#int...
View ArticleSome help with PVLANs please
Hi folks,I wanted to check a config in regard to PVLANs, because I think it is right, but I could not get my server to ping the vlan 10 interface (10.0.10.1) on my N7K (N7K8). Below are the configs (I...
View ArticleINE WorkBooks for CCIE R&S v5 Exam
HI All,I have heard that INE will provide the new Workbooks and VOD for the new CCIE RS v5 shortly after the cisco announcment.and it will make available to existing customers without any extra...
View ArticleI passed the CCNP!
I took and passed the Tshoot exam this morning! I am finally a CCNP. Man what a journey. I feel like I just finished a marathon and I am only part way done, I still have to take and pass the CCIE...
View Article6.3 OSPF DR/BDR Election Manipulation
Can someone answer me this? If you tell someone to make it so R5 is the DR and upon going down and coming back up retains the DR status, why is it that in the solution they show R4 as the BDR. I mean...
View ArticleAny update on ATC Videos or Live Video
Hey guys any update on the live videos or the ATC videos? Any live video in Jan? Would we see any of the new videos anytime soon? At least it would help to start watching those ones instead of waiting...
View ArticleQuestion on SAN : Emulex server mounting only NTFS1
When I did the task of Emulex CNA server for FCoE, I had the following observations. 2. The Disk Speed test did not work since ( the target for the NTFS1 drive is greyed out). And when I use One...
View ArticleClik here to view.
Fabricpath Multicast pakket question
Hey guys im working on a project about fabricpath and i have hardtime with understanding how fabricpath handles the multicast pakkets in following scenario.Lets say end node send a multicast pakket to...
View ArticleRedistribute eigrp address secundary
Does it posible redistribute addres secundary in eigrp?I tried to do it but doesn't worK R1inteface fastethernet0/0ip address 1.1.1.1 mask 255.255.255.0ip address 2.2.2.2 mask 255.255.255.0 secunday...
View Article3 Day CCDE INE Bootcamp
I see some update on ine page http://www.ine.com/instructor-led/ccde-bootcamps.htmMy question is about form ? it will be online ? and how to purchase because there is no offer/link for now in shopping...
View ArticleHow many tokens approximately are needed for the DC workbooks?
Let’s assume with all the add on’s.There is a guide for the R/S track http://www.ine.com/rack-rental-tokens.htm#purchase but none that I can find for DC.Thanks
View ArticlePBR and WCCP on the same interface
Hi All, Can we use PBR and WCCP on the same interface of a cisco router ???Regards,Abdul Mohsin
View Article