Lab Date Change
Hi everybody,i was just wondering whether any of you knows how to change a lab date once paid and within 3 months from the date. The point is i am scheduled for end of April but i would like to do my...
View ArticleUCS LAB config backup, restore
The UCS LAB guide referenced a TFTP server (192.168.0.10) that we can back up and restore configurations to/from during LAB sessions. Can we upload our UCS configurations here and then restore at a...
View ArticleSome help with PVLANs please
Hi folks,I wanted to check a config in regard to PVLANs, because I think it is right, but I could not get my server to ping the vlan 10 interface (10.0.10.1) on my N7K (N7K8). Below are the configs (I...
View ArticleBridge assurance vs. UDLD and Loopguard
Is it safe to say bridge assurance “replaces” the need for UDLD and loop guard in NX-OS only environments?From my reading it does, however UDLD is still a feature you can enable, and loop guard is not...
View ArticleNeed of advices
Friends I need your advices for the path I have to choose (CCNA Data Center or CCENT+CCNA Security) based on the following factors:a ) Higher hiring opportunities,b ) Better career development options...
View ArticleBGP MED - Inbound??
Hi, I have a doubt regarding bgp MED configuration. Everywhere I learn that you can set it outbound to an external peer to affect the incoming traffic from another AS into yours. But is it OK if you...
View ArticleClik here to view.
Fabricpath Multicast pakket question
Hey guys im working on a project about fabricpath and i have hardtime with understanding how fabricpath handles the multicast pakkets in following scenario.Lets say end node send a multicast pakket to...
View ArticleCCIEv5 topology
Hey guys - any ides when you will list/show the new INE topolgy for the v5?Reason for asking is i see most are going virtual for this and i might go the same way if Virl can run the INE lab.
View ArticleFEX and vpc peer-link failure
Hi,Let's assume a fex straight throught topology with a host vPC dual homed to 2 fex. Each of these fex is connected to one vPC peer (5k or 7k doesn't probably matter). What happens to the fex HIF of...
View ArticleReal life redistribution head scratcher
Hello folks. Its been a while since I visited these forums but I figured if anyone was able to help me with this issue it would be you guys. I have a redistribution problem and its killing me over...
View ArticleHow to check FEX uplinks?
Hi all, Does anyone how to verify the uplinks between parent Nexus 5Ks and 2K fabric extenders? I would usually use CDP or UDLD to confirm neighbours on a link but this does not seem possible on FEX...
View ArticleDubai here I come
Well, I never thought I would do this but I will try for the thrid time to pass R&S v4 in Dubai. Its like an addiction, can't get enough, pleasure and pain. So if you have any tips please pass them...
View ArticleTCL in XR
All,Is the TCL language the same in XR as IOS? Wanting to write a reachability script in XR just in case.Thanks, Warjack
View ArticleTe-tunnel
Hi, I am trying to load-balance the traffic across 4 links between PE using TE tunnel created we have 3 STM link and 1 Gig link . GIG link traffic loadshare count is 10 , where as STM link load-share...
View ArticleTask 5.12 EIGRP Poisoned Floating Summarization
My summary is not getting advertised to SW2 as per the solutionAny thoughts as to why this is or has cisco changed the way it works in later IOS? or have I missed something?ThanksSolution..Routes with...
View ArticleStatic route types
i dont found the output difference between these three static routes command, any one please clear me that.1. R1(Config)# ip route (Destination add) (Destination mask) (Next hop address)2. R1(config)#...
View Article7.4 Gateway Redundancy
Hi,given the task description "your network team has configured half of the hosts on VLAN 36 to default to R3 and the other half to default to R6." I would suggest the following solution. The advantage...
View ArticlePutty behavior
In SJ can you paste with ctrl+v in putty or is it right click + paste only?
View ArticleClik here to view.
Brussels experience
Hi there,To help our community, I would like to share my experience in Brussels.I took my CCIE R&S lab exam four months ago, in August 2013.No need to say that I missed it, otherwise I'll post this...
View Articlehow to get from Eurostar terminal to Diegem station
Can anyone help me with thier experience of this leg of the journey, i don't want to become completely lost -- is it quite simple?
View Article