2.10 Back-to-Back Frame Relay
Apologies if this has been answered elsewhere, but I just want to nail this in my own head. Bullet point 2 asks us to "Configure Frame Relay PVC 514 on this link without using LMI"The solution guide...
View ArticleCME Help
I am installing a CME at a customer site where their current phone system is divided between 2 companies. This CME will have 4 POTS lines for one business and 2 lines for the other. How do I make it...
View ArticleWB v4 Sec 5 - DNS doctoring Static -- R3 cannot ping CA-server mapped IP
Hi ,After doing the configuration as mentioned in the workbook, R3 cannot ping CA-server mapped IP ( 150.51.0.100). Below are the logs from R3, ASA2..Please advice.. ASA2 config:object network...
View ArticleISE & webauth
Hi, I have a lab using ISE and webauth on the switch.The authenticated vlan is 15 and it has to be assigned by ISE after the correct authentication/authorization on the same port there's an IP phone...
View Article3 Months to First Attempt
I am looking for some advice from those that have taken and passed the CCIE R&S lab in the past. I have been studying for the exam for over 2 years, read a number of the books off of the...
View Articlelegacy CQ
Hi; with regard to legacy CQ (custom queuing), we can explicitly define a queue limit (in packets per queue) and the bytes serviced in each round by packet-caunt command (in bytes per round); but what...
View ArticleWhen is the November Live ATC Schedule time?
Hi Brian, im guessing the next Live ATC session is sometime soon. Just checking to make sure im not missing out since I havnt heard any thing about when the next schedule is. Noting on the blog either....
View ArticleChanging pre-configs on the lab
A well known rule for taking a CCIE lab is to not change any pre-configs. I wanted to get feedback from people regarding this matter which has me a bit confused. Lets say that the pre-configs for the...
View ArticleHow to set up ASA on GNS3 ?
How to set up ASA on GNS3 0.8.6? Is GNS3 support ASA > 8.2 ?Do we need license to active certain feature such as failover, ASDM ?
View ArticleEoMPLS L2VPN Ethernet Port Mode to allow VLAN Rewrite
Hi,Does anyone know how to configure VLAN rewrite for L2VPN EoMPLS to allow the two ACs to be in different VLANs?I am trying to setup a EoMPLS scenario where CE1-PE1 are in one VLAN and CE2-PE2 are in...
View Articleneed advice!
Hi everybody,i passed written exam 3 months ago now i need to go for lab prep, but after changes i don't know what to do if i can do it and go for v4 or i should go with v5?? can i do v4 in 6 months??
View ArticleASA (GNS3) cannot ping inside to outside
I practice ASA 8.4 using GNS-3 but cannot ping from inside to outside. ASA is on Single Router mode.Simple Topology : R1 <---inside, OSPF Area 0 -----> ASA(ver 8.4) <----outside, OSPF Area...
View ArticleQOS Queuing verification
Hey Guys, Im looking at the QOS rolled out accross the network where I am working in particular the queuing stratagys, I am however getting conflicting information and im not sure if one has priority...
View ArticleOT: Study Partner For RS V5.
Hello I`m currently looking for study partners to tackle CCIE V5... I`m actually starting my studies using Petr 48 Weeks Guidelines and we can make adjustments after V5 its finally announced. This...
View ArticleLab Exam Ver5 announced
https://learningnetwork.cisco.com/community/certifications/ccie_routing_switching/lab_exam_v5 CCIE Routing and Switching Written and Lab Exams RevisionThe CCIE Routing and Switching (R&S) Written...
View ArticleVersion 5 hardware requirement : 3560 and 3560x
Accourding to annoucument , switch requirement for version 5 is Catalyst 3560X Series. I would like to know that that would be reasonable that i am going to buy 3560? any different between 3560 and...
View ArticleTraffic Filerting
Requirement: allow port f0/1 to accept traffic only from MAC address 1111:2222:3333 and "switchport port-security" command cannot be used.Solution: mac access-list extended MAC-FILTER...
View ArticleWhat's the difference between WS-C3750X-24P-L with WS-C3750X-24T-L ?
I want to buy cisco c3750x switch between WS-C3750X-24P-L with WS-C3750X-24T-L . I still have no idea to choose which one is worth to have, can someone give me the suggest?
View ArticleClik here to view.
Brussels experience
Hi there,To help our community, I would like to share my experience in Brussels.I took my CCIE R&S lab exam four months ago, in August 2013.No need to say that I missed it, otherwise I'll post this...
View ArticleINE CCIE DC WB Physical Topologies
From past experiences I've come to the conclusion that having your own lab is more useful and provides more flexibility when studying for the lab exams, I am not the only one trying to schedule the INE...
View Article