Section 1 Task 4.12 OSPF Domain-ID
Hi all !! this is my first post in the community.I was working on this task and I noticed 2 weird things about the explanations provided : After completing all redistribution, R1 should see two...
View ArticleClik here to view.
Trying to Set up Cisco IPSec VPN with & with GRE through the Firewall
Hey guys,I am trying to build a set up wherein I have 2 scenarios, one is IPSec VPN alone but through a firewall that is doing NAT in the middle and other wherein running GRE within IPSec VPN for...
View Article7.7 EEM ..?
Ahh what am i doing wrong with this - looks the same as the SG ..? !event manager applet INTERFACE_MONITOR trap event interface name "Serial0/0" parameter txload entry-val 204 entry-op gt...
View ArticleAutomatic reply: 7.7 EEM ..?
HI, I am on personal leave from 30th Aug to 10th Sept and would not have access to emails. If anything urgent please call me L3 Ops on-call on 97386131 or for other issues please contact Yew Lum for...
View ArticleWhy "bgp redistribute-internal" not required in MPLS L3VPN
Guys,Anyone knows why "bgp redistribute-internal" is not required for BGP VPNv4?Because they don't have this documented that "even without bgp redistribute-internal", iBGP VPNv4 routes get...
View ArticleSwitching in GNS3
Anyone else get the memo for switching in GNS3 coming in a few weeks?
View ArticleTask 4.11 - Filtering with Standard Access-Lists
HiThis task question: Configure a one line standard access-list on R6 to filter out all routes coming from BB1 that have an even number in the third octet.This task answer: access-list 1 permit 0.0.1.0...
View ArticleClik here to view.
EIGRP question
hi allplease see this question since I failed to understand and answer itRefer to the exhibit. ROUTE Enterprises has many stub networks in their enterprise network, such as router B and its associated...
View ArticleClik here to view.
Frame Relay with IPv6
Hello community,I am having a hard time making this network work. Basically I have eigrp running between R1,R2,R3,R4 and OSPF between R4,R6. The connection between R1,R2, and R3 is in frame relay...
View ArticleEgress queuing on 3560
I am confused about egress queuing on 3560's. Assuming the following:R1 fa0/0 --- fa0/1 SW1 fa0/19 --- fa0/19 SW2 fa0/2 --- fa0/1 R2!SW1 configmls qosno mls qos rewrite ip dscp!interface...
View ArticleJumbo Frames with UCS, Nexus & NetApp
Hi folks, looking for some help in relation to a problem I have hit, which has got me scratching my head!I have a flexpod system, and customer wanted jumbo frames for NFS from UCS blades to NFS...
View ArticleINE Full Scale LABs
Hello, Brian and Mark.Your current Full Scale Beta labs are not supported with rack rentals.Could you tell me please when it is going to be supported? any approximate date?Also is there any additional...
View ArticleDigit Manipulation at Route Pattern level
Hello,As per my understanding, Digit manipulation done at the RP level will have impact on the display of the called number in the Calling Phone screen.When I tried it in the Lab, it is not working as...
View ArticleQOS configuration on Cisco Nexus 5000
Hi all Can somebody knows about difference between network-qos class maps and simple qos class maps type.I have a problem with a basic cos/precedence remarking, it seems that Cos can only be configured...
View ArticleExtended Access Lists Statement Confusing - Please Help
Hello all,There is something that has been confusing me with respect to Extended Access Lists Statements in the CLI.Take for instance, I am asked to permit SMTP (TCP Port 25) and ICMP going from and to...
View ArticleClik here to view.
Access to N1kV on Data Center Rack Rental?
Hi, I just bought DC package on INE and its awesome material. I have rented the dc rack and was able to access everything and got a good feel of it but was unable to access N1kv. Could somebody please...
View ArticleMuliple VRF routing over vPC peer link
Hi Guys Can someone pls tell me how vPC peer-link is used for mutiple VRF communication between two chases I mean I have VRF RED, GREEN and YELLOW in SW01 and SW02. How they form routing neighbor...
View ArticlePassed CCNA Certification
Got CCNA 640-802 done, now moving onto reading up on the 200-120 CCNA. Does any1 know if INE has uploaded new videos for this cert or is it still following the videos for 640-802? Also I plan on...
View ArticleBGP Dampening Question
Hi all,I'm kind of confused on which method to use to configure BGP dampening.Assume I have the following requirements to configure:Half-life: 10 minutesSuppress Limit: 2500Reuse Limit: 1250Max...
View ArticleAuto negotiation
Hi guys, I understand on Cisco switches you disable auto negotiation by setting the speed and duplex. i.e. interface gigabitethernet0/1 speed 100 duplex full My question is: do you have to set BOTH to...
View Article