Clik here to view.
Disjoint Layer-2 with UCS & VMware
Okay, so I've been spending a bit of time with this for my studies and did a bit oflabbing the other day, so here are my thoughts, questions, results, conclusions etc. Please feel free to chip in, and...
View ArticleIf all lines are busy in a sip trunk can I have the call sent to voicemail
If all lines are busy in a sip trunk can I have an incoming call sent to voicemail in a CME system? For example if there are 10 sip trunks and all lines are busy and an 11th call comes in is there a...
View ArticleCCIE R&S Written/LAB Exam Preparation Way
Dear All,I am in networking field since 6 years and preparing for R&S written exam but here in office, all those have done CCIE, as per them i have to use brain dumps to clear written exam and...
View Articleset mpls-label @ Full Lab 4
@ Full lab 4,I am not very clear that BGP needs rout-map with 'set mpls-label' at R3 (Border Router) of AS200. But, this kind of configuration doesn't need to R5 and XR1 of AS1000. It is working well...
View ArticleNTP and time zone.
Experts,Is it right that NTP doesn't provide the time zone information.If the server is set to UTC+2 timezone, still the client will be considering time information it gets from server in UTC only. We...
View ArticleWireless Study
Hi,Very upset with my results.I attempted my CCIE Wireless in brussles however what i prepared and what i got in lab was so different.I was working on fast lane and IPX WBs.But nothing worked. The...
View ArticleMPLS VPN with Internet Access
Like many of my posts, this is more of a sanity check question than a technical one, and, yes, I understand that some of this may be related to what makes good test subject matter versus what makes...
View ArticleAnyone having problems connecting to storage in INE UCS or N2K labs?
Ok, I know you guys are out there doing UCS and regular storage labs because all the time slots are always booked up, so I'm hoping a couple of you might be able to help me figure out if it's me or my...
View ArticleTASK 2.6 BGP Features
I didnt read the question and assumed that they were asking to filter out incomplete origin types of routes received from BB1. So spent some time looking at ways to build a route-map that looks at...
View ArticleClik here to view.
IPv6 over PPP, Frame-Relay, Pseudowire
IPv4 is working file over psedowire using MPLS or L2TPV3. But, I am facing problem with IPv6.If both site is PPP or both site is Frame-relay, I could setup IPv6 over pseudowire. But, if one site is...
View Article6.5 Control plane - BGP down
Hi All, 6.5 closed ports task bringing my bgp port down.when ever i removed the config from control plane then bgp is coming up. Pls help Class Map type port-filter match-any C-MAP_CLOSED-PORTS (id 3)...
View ArticleRegarding features
Hi Everyone, I am using 8945 video phone and cucm 8.6 in my network set up.I had certain queries, I configured 2 lines in my 8945 phone(say 1000 and 2000).And when i am trying to use...
View ArticleVmware workstation or Esxi images?
Hello everyone,I'm preparing to take the CCIE Voice lab exam and while searching to get material I found that virtual images of the main Servers/application (CUCM, CUC, CUPS, UCCX) are sold in two...
View ArticleCCNP Data Center from INE?
Will INE have a CCNP Data Center course or no? If so, how far off are we?As an alternative, if someone has CCNA R&S knowledge, and a CCNA Data Center, can they just proceed with INE's CCIE Material...
View ArticleME3400 QinQ/dot1ad Support for CCIESPv3
Guys,Is CCIE-SPv3 covering QinQ and dot1ad for ME3400E switches running IOS Software Version 12.2-54 SE? I just can't run these commands found in:...
View ArticleLAB 3 Task 4.4
Hi everybody,in the LAB 3 task 4.4 it ask essentially to prefer R2_to_XR1 link over R3/R4. The config i did on R4 is the following one: ip extcommunity-list 1 permit rt 1:1! !route-map...
View ArticleCCIE RS Version 5 on Cisco Live in Milan, Italy
GuysIt's official now, Cisco going to explain the new version 5 on Cisco Live in Milan, Italy . Presenter is Bruno van de Werve, Exam Product...
View ArticleAnother question on compatible CCNA lab hardware
Hi.I have just started down the path to CCIE with the first stop being CCNA.So, I have been looking for a lab setup for home/office (my company is supporting my quest) I can find some older gear...
View ArticleClik here to view.
Workbooks for R&S V5
Good morning Brians,The wait is finished today . No more rumors and talking in the air about V5.Please tell us when are you posting the updated workbooks for V5 plus updated topology and hardware list...
View Article