CCIE Security v4 Practice Labs Workbook now released
Folks, While studying today my study partner noticed that within the last 10 minutes, INE has released the new CCIE Security v4 Practice Labs workbook.We also now have new IEOC forum sections for the...
View ArticleRack Rental tokens for sale.
I have taken a new position at work, that focuses me on IT operations and out of the technical field, so I dont have the need for my tokens.I have 1536 tokens left that I will sell all for $600Or I can...
View ArticleTask 3.2 - Prefer R1-R3 link. Offset list unnecessary.
The task states users in v127 should prefer to use the frame relay pvc between R1 - R3 to reach R3s loopback. This kind of implies that we need to offset the metric on the R2-R1 path to make it less...
View ArticleTask 2.3 - rehashed
I was going to shrug this off, but it's bothering me now. For whatever reason, MED wasn't the first thing in my mind to manipulate the 150.1.11.0/24 route out of AS200. Resetting the origin code was....
View ArticleUnidirectional PIM?
Hi,We know that most protocols do verify bidirectional communication on a link when establishing adjacency. My understanding is that PIM doesn't do this, so there could potentially be a situation where...
View ArticleDMVPN per tunnel QOS
Little bit confused about this , when following cisco configuration guide , they do the following...on Spoke , put into nhrp groupon Hub, make Qos policy , and map the nhrp groups to service...
View ArticleVRRP question
I'm trying to get VRRP on dot1q sub-interfaces working. I'm seeing some strange behaviour with both sides being MASTERR1 ->2960 stack port 1/0/1R2 ->2960 stack port 2/0/1 sho run int...
View ArticleFailed on my first attempt... that's not the end... it is the start
Hi everybody here.Last week I failed on my fist attempt for the Lab R&S exam in Brussels. After four years of study and passing the written exam twice (i had to renew it), after my family and me...
View ArticleCCIEDC PASSED
I have passed CCIE DC in my first attempt and making me triple in Ccie league. Preparation Past 6 months I am studying INE cciedc videos. Workbooks and. I am very regular ieoc forum Visitor....
View ArticleMPLS QoS
I was just wondering if one of the Brians or another INE instructor had put out a video or posted a blog on MPLS QoS? There wasn't anything in the R&S ATC videos that really covered it. Pipe,...
View Articlespanning-tree portfast on interface enabled [do you agree?]
- spanning-tree portfast on interface enabledportfast--->immiedietely jump from blocking to forwarding state [omnit listening and learning]portfast--->don't block bpdu...
View Article2.1 Rip Summarization
Hi, I was suspicious , SG instructs to do summarization through the BB2 with both ;--Interface level command (which faces to BB2) "ip summary-address rip 163.1.0.0 255.255.192.0""ip summary-address rip...
View ArticleProblem with ISIS ATT Bit
Hi guys,I am having a weird issue... a L1L2 router peers with an L1 router but the L1L2 (which also peers with another L2) does not set the attached bit and forward a default route to the L1 router. I...
View Article8.1 Frame Relay Traffic Shaping
• Configure Frame Relay Traffic Shaping on R1 per the followingrequirements:.o R1 has a port speed of 512Kbps.o R1’s DLCI 113 has a provisioned CIR of 256Kbps.o R1 should send data at 384Kbps and...
View ArticleDMVPN - phase 3 - OSPF
Hi,I'm trying to implement the phase 3 together with OSPF and I found different behaviour depends on IOS version. The new version 15.2 doesn't work but the same config on 12.4 works with no issues:I...
View Article1.9 VTP Transparent
Hello guys,Does this task worked ok for all of you? This is how it looks before SW1 goes into VTP transparent mode. RSRack1SW1#sh vtp status VTP Version : 2Configuration Revision...
View ArticleUCSM B-series CIMC VLAN?
Hi, Can you set a specific VLAN for the CIMC when you are building a service profile? or is the remote KVM proxied through the USCM? I cant seem to find any information on this and whenever I Lab it i...
View ArticleEIGRP metric at redistribute static
Hi All,In Section 5.28:When redistributing static into EIGRP or between EIGRP processes, metrics areautomatically derived from the source prefix. For all other redistribution, the metricmust be...
View ArticleNexus Admin account and Jumbo Frame setup
Hi Guys, For some reasons we have lost the local admin password to our nexus platform, but can login using a TACACS account. Is that a way to reset the Admin password on the Nexus platform without...
View ArticleTrunk Mode on FC ports (MDS and UCS)
What is the 'proper' configuration for MDS interfaces facing the UCS? The INE guide instructs us on how to enable VSAN trunking on an FI, which results in the following config change:UCS-Lab-A(nxos)#...
View Article