Nexus 7000 dual sups managment 0 config
Hi everyone I was wondering if you have a Cisco Nexus 7000 with dual sups, would the managment 0 for both sups be the same IP address? Each one I take it would be plugged into some type of layer 2...
View ArticlePhones showing REJECTED but available in UCM
I am facing a strange problem in CUCM , I have 1 PUB & 2 SUB ,2 subs are used as TFTP and call processing , call processing is working fine but phone registed to the SUB1 is showing status rejected...
View ArticleIne tokens
Hello, I have 443 tokens which I will not use anymore and I want to sell it.I want to sell it for 200$.If anyone is interested, please tell me. Thank you,Ioan Branet +40743286118
View ArticleR&S V4 First timers
Is there any benifit in attempting V4 for first time after Mid-April, no chance to resit due to one month restriction, no seats anywhere in Europe, exam format completely restructured. Even if you are...
View Article(DD-ModXX-CUCM-Startup.tar" file)
Greeting, I'm currently trying to work through Module 2 in workbook 1. My issue is that I'm trying to figure out how I can get the (DD-ModXX-CUCM-Startup.tar" file) or something similar to my...
View ArticleTranscoder selection in media resource group/list
Hi all, I read some documents for Transcoder. But, I still concern about Transcoder/media resource group/list selection. For Example: Phone1 with: region: re1 transcoder : xcoder1 Media resource...
View ArticleNeed of having vlan tag per PE-CE link
What is the need of having vlan tagging per PE-CE link. Say for eg.if I have 2 links bundled in one port channel, why would I use 2 metro tag vlans ?
View ArticleWCCP Question
Hello all,What is the difference between the interface level command "ip wccp redirect exclude in" and creating an access-list and matching an address range in a redirect list. Wouldnt this perform the...
View Articleload command under telephony-service
Hello All,I am facing issues in understanding the purpose of load command under telephony-service.In CME 9.0 software that I have download, I could see apps45.9-2-1TH1-13.sbn , cnu45.9-2-1TH1-13.sbn,...
View ArticlePPPoE with DHCP
Hi; I have a issue with DHCP on a PPPoE scenario, but because I did not know how to upload the picture on this forum, I asked my question here...
View ArticleTask 2.2 Redistribution. Alternate solution
So I accomplished the redistribution task in a slightly different way. My reasoning for this is that increasing the OSPF External AD above 170 when doing mutual redistribution with EIGRP, doesn't...
View ArticleClik here to view.
implementing Inter-Vlan Routing
hiI am trying to configure this Labfrom Host A, Host B, ALS1 , ALS2, I am able to ping only their gateways !on R1, I am able to ping all subnets (static route is enable to reach 200.200.200.0/24)on...
View Article4.15 not able to see
Dear Gents, After completing the 4.15 task I am unable to see the route of R3 Lo0 from R6 and also in R6 is not geetting update . Here is the Partial out put of R6: 150.1.0.0/24 is subnetted, 8...
View ArticleTask 2.2 - mutual redistribution - rip to ospf to eigrp
By changing the admin dinstance for ospf external routes to 171, R2 is no longer routing 192.10.1.0/24 (rip subnet between BB2 and R5) via OSPF area0 to R5, it is choosing the external EIGRP route...
View ArticleClik here to view.
Desk Phone Control missing on CUPS server
I don't know if I'm going crazy from all of the studying, or something corrupted, or I'm looking right at it and just can't find it. I can't seem to locate "Deskphone Control" on my CUPS server?? In...
View ArticleMdef cons get failed for VRF - Lab 4 - Task 6.1,2
Guys,I hit a possible bug on IOS-XR 3.9.1 (CSCti89409) while trying to configure MVPN for Full Scale Lab 4 Task 6.1-2I hit it on XR1 and XR2 both, but after removing the configuration, commit, and then...
View ArticleLabeled traffic using ISIS L1 Default Route?
Guys,Is it possible to have Labeled traffic using ISIS L1 Default Route (or any default route)? I guess the only way is to route-leak? I tried "mpls ip default-route" and it doesn't work. ! Network:...
View ArticleISIS over L2VPN Frame-Relay P2P
Guys,any idea why ISIS adj is not forming over L2VPN frame-relay P2P, but CLNS adj is forming?? Its seems like each CE isn't receiving LAN IIH packets from other end. Network:* R3 - (R1 - R2) - R4,...
View ArticleIssue with CUE intial configuration
Hi EveryoneI am using AIM CUE.During the initial configuration of CUE I am unable to add the NTP server address. Whenever I give the IP of the NTP server it gives an error cannot reach the NTP server,...
View ArticleIOS SCCP Registration Issue
Hi, I recently hit and issue where my dspfarm resources (MTP & transcoder) would not register and when I ran show sccp I got something along the lines of "TCP Socket down" in the output. I'm not...
View Article