Guys,
I hit a possible bug on IOS-XR 3.9.1 (CSCti89409) while trying to configure MVPN for Full Scale Lab 4 Task 6.1-2
I hit it on XR1 and XR2 both, but after removing the configuration, commit, and then reapplying the multicast-routing config on XR2, the problem went away on XR2. However, on XR1 the problem persisted due to which I couldn't achieve end to end mcast traffic. I just want to know if thats the case, then how is Cisco testing MVPN on IOS-XR?
RP/0/0/CPU0:XR1#show run multicast-routing
Thu Dec 12 05:32:01.259 UTC
multicast-routing
address-family ipv4
mdt source Loopback0
interface all enable
!
vrf FOO
address-family ipv4
mdt data 232.255.255.0/24
mdt default ipv4 232.0.0.1
interface all enable
!
!
!
RP/0/0/CPU0:XR1#show run router pim
Thu Dec 12 05:32:06.063 UTC
% No such configuration item(s)
RP/0/0/CPU0:XR1#ping vrf FOO 239.0.0.3
Thu Dec 12 05:32:38.558 UTC
Mdef cons get failed for VRF 0x60000058 - No such process
RP/0/0/CPU0:XR1#