6.14 Virtual Links in Area 5
I cannot figure out why my virtual link will not come up unless I change the cost on the serial interface of R3 toward R2. Note, i've changed my rid to 2.2.2.2/3.3.3.3 for r2/r3. If I change the ospf...
View ArticleLab dates Hong Kong - Fall 2013
Why are there only available lab dates in februar and march 2014 in Hong Kong. Anyone know? Same with Beijing..
View ArticleNeed suggestion:CCIE SP exam-Pass TS,Fail Config.Re-Evaluation?
I really need everybody opinion/suggestion,Just retake my ccie sp lab exam,I pass TS, but fail config sectionHOW to reflect your performance record to your actual score?because I know passing score...
View ArticleGroup policy by user
Currently I have a default group with default group policy for all users who are connecting to ASA 8.4 via AnyConnect VPN client. There are some users that I want to assign different policy parameters...
View ArticleRecommended study materials
Hello all Guru's,, I am looking for recommended study material for ccie route and switch. If someone can help me to know what books I will go with for study it will be really great help for me. I...
View ArticleFabric Path and vPC / vPC+
is it possible to bundle several fabric path links into one portchannel? I have not been able to find any documentation that supports or denies this. Thanks
View ArticleClik here to view.
Site-to-Site IPsec VPN not working - Need help Verifying Configs
Hello community,I have configured Site-to-Site IPsec VPN as per the topology shown here but for some reason my routers are not negotiating Phase1 or Phase2. I have checked my configs multiple times...
View ArticleClik here to view.
Blasted 2511!
OK, well today has been a bit disheartening. I fired up the 'ol lab and couldn't get my 2511 to work right. I had 12.2(26) IPSEC IOS loaded on it previously and used SSH to remote into it and could...
View ArticleClik here to view.
Question on MoH at Br2R3 in CME SRST mode
Hello experts, I was practising B-ACD based on the drop-through example from Cisco configuration guide. Here's my Tcl script. Callers from PSTN call in and hear the initial welcome message. But if no...
View Article3560v2 IOS
Hello there.Just got my hands on two 3560v2-PS for my lab and I've noticed only IP base and IP services IOS images available, do you know if the IP services IOS will cover the Advanced IP services IOS...
View ArticleUsing Data Center Racks
I have been using INE Data Center book for a while. I want to do my labs on DC Racks.This will be my first experience with Racks.I require some clarification/help from members who have used it.After...
View ArticleClik here to view.
Task 7.4 - Traceroute
Hi,In a way the SG breaks the rules for the lab for this task, since we are not allowed to use additional IP addresses unless otherwise specified.My solution works without breaking any rules:ip...
View ArticleIPv6 Multicast via GRE
Hi All, I am trying to get IPv6 multicast working over a GRE tunnel, but am having issues. My connection is below: R0 -----R1------R6 R0 and R6 support IPv6 multicast routing, but R1 does not. I set up...
View ArticleMPLS Traffic-eng router-id on destination router ?
Basic MPLS TE :R1 ---- MPLS TE toward loX -----> R10 (lo0, loX)We don't adverstise loX to IGP. What is the R10 mpls traffic-eng router-id should be ? lo0 or loX ? If router-id should be TE...
View ArticleRack Rental with L2VPN Phone registration questions
Hi All, I'm new on the INE Rack Rental experience, so excuse me if this is a basic question, but I'm knind of lost. I have a 2801 router and a 3550 switch at home with some 7961s, 7960s and a 7970. I...
View ArticlePrivate VLANs using ESXi 5
Hi guys,I have a Cisco 3560 switch with trunk interfaces to 2 ESXi hosts. My intention is to configure private VLANs in the dvSwitch but configure the trunk uplinks as promiscous ports... without...
View ArticleQuestion about mutual redistribution
Hello Team, I configure the following topology to play with the routing redistribution. http://tinypic.com/view.php?pic=2h2qre9&s=5 Routing Redistribution Point are R5, R6 and R11 => On R5...
View Article2.6 - BGP Bestapth SElection.
Task says: 2.6 BGP Bestpath Selection• Configure your network so that R6 prefers to use the PPPoFR link forprefixes in the community 54:1.• Configure your network so that R6 prefers to use the Ethernet...
View ArticleTask 2.8 - Why next hop self?
Why do we set next-hop-self to R2? Without it if we drop the link R1-R3, R1 has a BGP route via 23.3 and has the 23 network via OSPF area 51 from R2? So it still works?
View Article