QOS
Hi Experts, I have a question for applying QOS .i have branch connectivity vis MPLS ethernet , i want to deploy qos on the bandwidth available e.g 10MB , whats the best practive to apply it on outbond...
View ArticleTCL Scripting
Does anyone have a good resource to learn basic "TCLing" for reachablity testing? I saw the post here: http://www.ine.com/resources/tclshrsh.htm, but I don't understand the code and it really doesn't...
View Article6PE over MPLS (LDPv4), next-hop question
Hi,In 6PE over MPLS, the next-hop of the IPv6 prefix will be changed to IPv4 of the loopback IP of PE, when exchanging routes via MP-iBGP with remote PE.Then may I know anyone know by what rationale...
View ArticleTCL Script help and advice
Dear All,I am tryiong to figure out how to write a TCL script to search for a particular string with a router's config (Ip helper address) and based on the interface on which the helper was found add a...
View ArticleEIGRP Tag
Hey, I am looking at an EIGRP implementation on the Nexus 7000 and I am wondering if the Internal Tag can be configured? I can see on Cisco's Documentation that the External Tag field can be set but on...
View ArticleStudy Approach
I read this article below about two manners to study to CCIE. On the Kick Start Approach he tells us to do the Appendix A after that do the Vol2 LAB1 and note the weak points to back to vol 1 and...
View ArticleINE Staff: Request for feature on AAP
I have personally accustomed myself to watching videos on VLC media player (or any other player for that matter), but not at regular speed. Instead, I like to use 1.5X speed. This allows me to get...
View ArticleMQC Single-Rate Three-Color Policer
The solution guide explains how policing burst sizes at one end must be greater than shaping burst sizes at the other end, but the explanation is a little too difficult for me.Can someone...
View Articlehost and route in routing table
I think I need a sanity check here or a least some help :0PIn the Vol 2 lab 2I'm seeing this on router 5 in the routing table: C 132.4.45.4/32 is directly connected, Serial0/1/0 C...
View ArticleLoading Configs
For those of you with a full home lab and using a 2511-RJ or equiv as an access server, how are you loading your lab configs to your routers and switches? One by one or some other method.I am running...
View Articlecucm cuc sip integration
Hi, Testing this integrationFollowed the cisco guide step by step.So in cucm: sip trunk, with sip profile configured as per guide. route pattern to vm pilot using the sip trunk. voice mail pilot...
View ArticleR&S Topology Missing
Hello,I noticed I am no longer able to find the R&S Topology on INE's website:"How to build a CCIE rack". Has this been removed from the site? is the topology being changed?
View ArticleN5k to N2k
Little confsue ..suppose N2k is connected to Rack Mount server which has CNA 2nd Gen. topology is exhibited below-- Rack Server -- N2k (Cisco Nexus 2232PP) --- N5k -- MDS--Storage. NOW from CNA to...
View Articlects role-based enforcement
Hi, just trying to figure out cts role-based enforcement. My understanding is that this is a required global config command for any L2 ports which need SGACLs applied - e.g. server 1 on vlan 10 needs...
View ArticleWould you do this?(Root guard)
Would you apply root guard on a scenario where there are diiferent root bridges for each vlan?I think to apply root guard on such scenario would get totally confuse,i would prefer to apply root guard...
View ArticleTASK 2.5 - cosmetic as-path question
Hi,I used:Rack1R6#show ip as-path-access-list AS path access list 54 permit _54$AS path access list 60 permit _60$but SG suggests that we should use ^54$ for routes originating from AS54.Anyway...
View ArticleCCIE #36665 the 2nd - SP
Hey guys, yesterday I passed the CCIE SP on my 2nd attempt… 10 months after the R&S. I actually started the SP journey 4-6 weeks after the R&S.You really need to know all the Technologies in...
View ArticleCCIE VOICE 29-07
Hi all, Anybody taking the CCIE VOICE in Brussels next monday?I'll be there :-) smaikol
View ArticleSingle-mode vs. Multi-mode
Aside from the usual color coding for single-mode (yellow) and multi-mode (orange), how can we check if a fiber optic cable is using these modes ? Any hints ?
View ArticleWill this break TCP connection?
Hi guys,i have a question,observe this scenario below please where i have two connections with the ISP,each connection with its respective public ip address,Router's f0/1 public ip address is...
View Article