Topology for foundation Labs
Hi,I have seen the Cisco's Program manager's webinar and he suggested to use scenarios where you have sites connected to multiple providers like MPLS etc. as much of the focus seems to be on DMVPN...
View Articlemy DRAM is damaged and looking for alternative IOS
hi allmy Cisco 2610XM router one DRAM is damaged, so currently I am running only 64 MB of DRAM.but this cannot run c2600-adventerprisek9-mz.124-19.bin !is there alternative IOS to solve this issue...
View Articleredist lab1
Describe problem in Topology:R9 redists in its Lo0 (150.1.9.9/32) interface into EIGRP. R7 will see this as a DEX route (AD: 170). It will send it on to it's EIGRP nbors (R6/R3 and ultimately R1)....
View Articleredist lab 2
Now R1/R3 have an ospf/eigrp peering we should consider EIGRP/OSPF admin distances.Issuing a debug ip routing on either R1/R3 will show us the issue(on R3)RT: closer admin distance for 150.1.9.9,...
View ArticleQuestion multicast ping
Hi,If I am issuing a multicast ping to a sparse group, may I have the following situation:the packets are received by the RP (register, and then normal packets)the packets cannot be sent over the SPT...
View Article2504 Wireless Controller
Hi All,I have a brand new Cisco 2504 Wireless Controller. I'm a little confused about setting it up. I have two different routers conecting to two differeint ISP's. One router is for the corporate...
View ArticleWhich outgoing label gets used if more than one is available?
I'm looking at the following output from a 7609 running 15.0(1)S5 Adv IP Svcs... router#show mpls forwarding-table labels 4864Local Outgoing Prefix Bytes Label Outgoing Next Hop...
View ArticleCCIE RSv5 Equipment Build
Edit: This thread is getting too long, and it is now closed. Please post in a more detailed thread below instead: Building INE's RSv5 topology on CSR1000vBuilding INE's RSv5 topology on IOS on...
View ArticleClik here to view.
OSPF NSSA
i'm not sure 100% but i believe this design is not valid although have no discontiguous area and the source redistribution addresses from where external routes come from were all ospf internal...
View ArticleHow do you know which vlans to add?
Hi, I have the first lab workbook for routing and switching and on the first exercise it says to add the vlan's to the switches. We are given a physical diagram and a layer 3 diagram but no layer 2...
View ArticleASA Static Policy NAT and PAT
I am having trouble understanding the logic behind this nat command. In all pervious examples the translated address was given in the command after the interfaces. However here we specify an interface...
View ArticleBGP Default Route
HI all, Ever since I studied BGP during the CCNP I have always wondered how an ISP can advertise just the 0/0 route to the customer?It was my undertanding and a recent network meltdown when I peered...
View ArticleClik here to view.
Blank.cfg for new V5 Rack
Hello can someone help please?I am after a Blank.cfgs for R1 to R10 as I have accidently saved over the top of my blank config before making a saved copy - I wondered if anyone has a spare copy I could...
View ArticleWhat's the difference between AIR-CAP2602I-A-K9 with AIR-CAP2602I-E-K9 ?
Does who know the difference between Cisco AIR-CAP2602I-A-K9 Access Points with AIR-CAP2602I-E-K9 ? If have no idea, follow the guide below: AIR-CAP2602I-A-K9 overview:Cisco 2600 AP AIR-CAP2602I-A-K9...
View Articleredist lab 3
This one's a metric related problem on the redist point. R9 injects its Lo0 (150.1.9.9/32) into the RIP process with a metric of 6. R7 receives it - but it also receives it from R6 with a better...
View ArticlePetrs MST Post
On Petr's post http://blog.ine.com/2008/09/24/mstp-tutorial-part-ii-outside-a-region/ Skip down to where it says "Scenario 1: CIST Root and CIST Regional Root"He says that Sw2 is elected the regional...
View Article13.45 Netflow Top Talkers -- "match only tcp and icmp"?
Reviewing IP Services section (WB-I). I do not see any other threads on this, so I am doubting myself. Is there a trick to this bullet-point, or error in workbook?Match only TCP and ICMP flows...
View ArticleSite to Site | ASA | Interview Questions
Hey Everyone, Recently I had a telephonic interview with a Company.. I was asked some questions and from them, I am discussing 2 Questions here for which I need to know the solutions.. Kindly Help.....
View ArticleLAB Exam Scheduled
For Me I decided to log in and schedule my exam. #1 Reason was so that I have a plan to work backwards from in my studies as well as securing a date that works best for me over a long weekend. Also...
View Article