Hi All,
I have a brand new Cisco 2504 Wireless Controller. I'm a little confused about setting it up. I have two different routers conecting to two differeint ISP's. One router is for the corporate network, the other router is for the guest network. The corp & guest networks are on two physically seperated LAN's. I'm not sure how to set the 2504 ports up. I want' to set the WC up to point one SSID to the coporate network and the other SSID to the guest network.
I'm assuming I set one SSID (SSIDCORP) on port 1 of the WC and connect it to the corp LAN. The second SSID (SSIDGUEST) I'll configure on port 2 and connected to the guest LAN. Should both ports 1 & 2 on the WC be access ports? Since they're both access ports I'm not putting a VLAN ID on either interface. Does this sound correct? Both networks have their own DHCP/DNS/DG ip address schemes.
thanks,
Owen_