IPMA- Assistant Device is not listed
Hello All,During the IPMA configuration, when I tried to do the Assistant configuration for a user ID, the Device Name, Intercom Line & Primary Line are not listed.But the manager configuration is...
View ArticleOSPF Neigh -point to point ios and xr
on 7200 if process is running as point point and xr is broadcasting, neighbors will form but remember xr will still generate lsa whilst the other wont once you correct it lsa wont be generated
View ArticleIOS-XR LDP label weirdness
I'm doing Full Scale Lab 4 and found something strange:routes---XR1------XR2Both XR1 and XR2 are peering via ISIS and LDP via their POS interface.XR1 is doing redistribution of some routes from BGP...
View ArticleIssues in ACE lab
Hi All, just wondering if anyone has had the same issues as me with the ACE lab - this is namely, I cannot test it, as I am unable to ssh into the Apache web servers from the 3750 to change their...
View ArticleTshoot Real Exam Doubt
Guys, Everybody says that in config section is really good to save the confi often and reload the devices when finish the confi section, to recheck if everything is ok.What about the Tshoot Section ?...
View ArticleClik here to view.
Fabricpath Multicast pakket question
Hey guys im working on a project about fabricpath and i have hardtime with understanding how fabricpath handles the multicast pakkets in following scenario.Lets say end node send a multicast pakket to...
View ArticleRenew specialist certifications
Hi I have a bunch of specialist certs such as VPN Specialist, Firewall Specialist and some others. I have found using google that I can renew them by passing a CCIE written test. I have a few...
View ArticleASA handling of fragmented packets.
Hi Folks,I have a question related to ASA fragmented traffic handling.The official Cert Guide states ( page 610 ) - "The ASA must store each fragment in a cache and virtually reassemble the fragments...
View Article5.26 Alternate Solution
For 5.26, the task I have a question on is:Configure R4 to redistribute the VLAN 43 subnet into EIGRP with the tag value of 4The SG shows this:R4:router eigrp 100redistribute rip metric 100000 100 255...
View ArticleExtension Mobility
Hello AllI have configured the following in the CUCME. On the Skinny phone, the "Login" Softkey is greyed out so that I could not able to login to test the EM feature.I am not sure why the login...
View ArticleTerminal client in CCIE DC lab
Is the client putty or SecureCRT? If it is Secure CRT, does it support tabs?
View ArticleDynagen/GNS3 - Bash script - Auto Config Maker
INE Community,I have been working on a simple (400+ line code) script that will parse a .net file and automatically build configuration files with IP addresses, hostname, and anything else I can...
View ArticleWhat happens when we run Portfast on a trunk link ? How does it effect STP ?
If someone can explain this part in detail.
View ArticleStatic route types
i dont found the output difference between these three static routes command, any one please clear me that.1. R1(Config)# ip route (Destination add) (Destination mask) (Next hop address)2. R1(config)#...
View ArticleAny update on ATC Videos or Live Video
Hey guys any update on the live videos or the ATC videos? Any live video in Jan? Would we see any of the new videos anytime soon? At least it would help to start watching those ones instead of waiting...
View ArticleTraining videos ... Do we need to SEE the instructor?
Hi all, I have noticed that INE and I.P.Expert have started including the instructors face in their videos, usually in a box in the corner. In the old days we just seen slides and CLI and only the...
View ArticleTask 6.1 - Rate-Limit
Hi all,I'm struggling to work out how the SG got 10000 bytes for Normal-Burst and Burst-Max.I use the formula Bc=CIR*(Tc/1000) and Be=(AIR-CIR)*(Tc/1000) to work out these out however the answers...
View ArticleIscsi drive not visible
When I did the ISCSI task in Nexus, I couldn't see the ISCSI drive in My Computer. Iscsi not showing in My computer although can see the target and connect to it ( i.e.,it pulls the target qualified...
View ArticleIs anybody preparing DC ccie?
Is anybody preparing DC ccie?I am going to take my lab somedays later. hope to communicate with people who are preparing DC Lab too.
View ArticleFCOE LINK DOWN
Hi, today i was doing FCOE in INE rack but for some reason my VFC link towards Server is not coming up , i have did manytime in CISCO PEC lab link comes UP in a Sec but i don;t know why link is not...
View Article