Anyone taking the exam in March/April?
Anyone taking the exam in March/April? If yes, please let me know.
View ArticleClik here to view.
Real time network require a solution
Hi All, I am currently providing professional services for a Service Provider organization.My manager has asked me to implement the below solution in of our customer's [i.e. a Service Provider] network...
View ArticleBGP prefix alert via EEM
I need to limit the amount of BGP prefixes that we send out to your ISPThis is a WAN conneection and we are limited to 50 prefixes,To prevent us ever hitting that and risking the link going down, I...
View Articleconfigure connectivity on nme-cue
My nm-cue died and all we have as a replacement is a nme-cue. I tried to apply the current config from the nm-cue to the nme-cue and I can't ping it from the router to the nme-cue.This was the working...
View ArticleDate format on CUCME
Hello everyone,When working on CME, under the telephony service the format for date is mm-dd-yyyy or dd-mm-yyyy.If you set the date format according to this command the phones are always showing the...
View ArticleCCIEv5 topology
Hey guys - any ides when you will list/show the new INE topolgy for the v5?Reason for asking is i see most are going virtual for this and i might go the same way if Virl can run the INE lab.
View ArticleNAT INSIDE & OUTSIDE
Hi everyone,I'm trying to test a inside and outside nat, in the specific I'am following this links:http://blog.ine.com/2008/02/15/the-inside-and-outside-of-nat/ My configuration is specular with Petr...
View ArticleCCIE R&S v5 lab Attempt Query
Hello All,I have started my preparation for the CCIE R&S exam. However, as Cisco has announced the 3rd June 2014 cutoff date for the Version 4 exam. Few doubt creeps into my mind. Is it possible...
View ArticleAdvice before the Lab
Guys,I am taking 2 weeks of from work before the exam to study hard for the lab. I have been studying hard already, but when the exam is coming you start to think about all technologies to really check...
View ArticleNexus 5500 FEX Scalability
Hi, does anyone know what the maximum number of fexes are that can be attached to a parent 5500 when we have both 'stright through' and 'dual-homed' fexes?I know for straight through it is 24 Fexes per...
View ArticleIPv6 ACLs on ASA
As we all know, ASA supports IPv6 access-lists.In routed mode, if you have inside level 100 and outside level 0 you will see ‘Implicit rule: Permit all traffic to less secure networks’ for both IPv4...
View ArticleCCIE V5 remote labs
Hi,Can anyone suggest when will be rack rentals and workbooks available for practicing R&S V5. Thanks Kunal
View ArticleCCIE SP LAB Date Book
Dear Friends, i booked one date for CCIE SP LAB and daily i am checking to find out early date than current but in a day, many times i found that once i logged in into CCIE OLSM page, no dates are...
View ArticleLDAP Integration Help
I have an exisiting CUCM deployment and would like to integrate LDAP. I may or may not have heard that when you enable integration it wipes the current user base. Has anyone had any experience with...
View Articlemulticast 5.2
Despite of what the solution specified i needed to enable the ip pim sparse/dense mode over R5 serial interface.without it R5 would not be able to establish a neighborship with R3 and obtain RP...
View ArticlePBR and traffic destined for the local router's loopback
Hi,I’ve been doing some studying on PBR and I’m having trouble finding out why traffic that destined for the local device bypasses the PBR policy.Example:ip access-list extended DROP-ACLpermit icmp any...
View ArticlePrivilege Levels
I was working on WB2 Lab5 and I came accross a section dealing with privilege levels.They wanted to make level 2 able to see the following commands in the running configuration: Hostname...
View Article6.4 control plane protection
As the title of the task imply and because the few words of the ticket didnt specified it (even undirectly) i didnt considered at all the possibility to set the filter on the interface because for what...
View ArticleCUE GUI Access
Hello,I’m having issues connecting to the GUI interface on my CUE module. I’ve got connectivity and have completed the initial CLI config. When I browse to the IP of the CUE, I get redirected to...
View ArticleFCOE LINK DOWN
Hi, today i was doing FCOE in INE rack but for some reason my VFC link towards Server is not coming up , i have did manytime in CISCO PEC lab link comes UP in a Sec but i don;t know why link is not...
View Article