Questions related to FI's.
I had a couple of questions related to the FI's.1. Why are both NPV and NPIV enabled on them? Shouldnt NPV be enough?2. On the task where we create a SAN port channel to the MDS from the FI , we see...
View Article4.16 - "Configure R6 to advertise a default route only to R1 via RIP"
Task states to "Configure R6 to advertise a default route only to R1 via RIP" -- r6 advertises the default route on vlan 146, which includes R4.It seems like this is violating the constraints on the...
View ArticleOSPF study references
Why don't we gather each candidate's unique study reference, and share them among us? More efficient than self study. OSPF Areashttp://www.mav.kiev.ua/cisco/pix/lsa_diag.png OSPF Opening...
View Article6.2 - OSPF over Non-Broadcast Media
I could not get this configuration to work correctly, unless I added a frame-relay map ip statement for R5 on R1-R4.Any ideas as to what I might have been doing incorrectly? R1 - R4 were not changed...
View ArticleDifferent device pools for different types of devices?
Hi everyone, I'm watching Mark's videos on CIPT2 and healready said multiple times that he typically creates 2 device pools at a minimum for each site: one for phones & one for gateways. But he...
View ArticleCisco IP Phone Setup
Trying to setup the INE CCIE Security rack in my home lab.Can someone from INE verify that the Cisco IP Phone that is used in the lab is configured to an actual Call Manager Server used in the INE...
View ArticleINE CCIE Security Rack version 4
Trying to get a handle on the build out of the INE CCIE security racks for version 4 blueprint.There are references to the following that I do not see on the INE CCIE Security racks when I login to my...
View ArticleLab Date Change
Hi everybody,i was just wondering whether any of you knows how to change a lab date once paid and within 3 months from the date. The point is i am scheduled for end of April but i would like to do my...
View Article3.6 Reliable Static Routing with EOT
Dears i have proper configuration of EOT on R4, now when i shut down R1 interface, i can see on R4 that rtr up=>down Rack1R4#sh ip route static 150.1.0.0/24 is subnetted, 2 subnetsS...
View ArticleLab 6 Task 6
Hi Guys,Can you clarify why would the passive mode of FTP at R6 reolve the issue ?The ACL applied outbound at R1 has already an entry which allows TCP traffic and the return traffic, which should...
View ArticleTask 1.6 hub and spoke with Virtual templates
SG uses the following on R3:interface Virtual-Template13 ip address 167.1.135.3 255.255.255.0!interface Virtual-Template35 ip address 167.1.135.3 255.255.255.0interface Serial1/0 no ip address ip pim...
View ArticleClik here to view.
Workbook 1 OSPF Task 38
Hello Community,In this OSPF task, R5 filters 150.1.1.1 and 150.1.2.2 inbound, it receives a default route from R4, and advertises a summary address of 150.1.0.0/22 to Area 3. Area 3 devices are also...
View Article6 Days from Lab
I am 6 days away from my first Lab Date which is on Jan 6th. I am feeling nervouse and exhausted at the same time since I have been studying non-stop. I feel like my brain cannot take anymore in but...
View Article3.2 IPv6 BGP Features
Hi guys, I would like to ask for your opinion regarding the first and second bullet points in this section : " Configure R1, R2, R4 to advertise IPv6 networks of VLANs 162,27,4 into BGP respectively"."...
View ArticleQuick question on "ip vrf receive" with igp as vrf
Guys,Is it possible to run "ip vrf receive" without vrf static route and instead run any vrf specific igp between PE-CE? I tried and it doesn't seem to work. Thanks,AMit
View ArticleBridge assurance vs. UDLD and Loopguard
Is it safe to say bridge assurance “replaces” the need for UDLD and loop guard in NX-OS only environments?From my reading it does, however UDLD is still a feature you can enable, and loop guard is not...
View ArticleFull-Scale Lab 1 - section 1.8 STP Optimisation
Okay folks, so here's the thing, in this lab, we have vlans 200-299 which need to pass from N5K1 & N5K2, nothbound over FP, and which also need to cross OTV.In this case, both the N5K's and N7K4...
View ArticleHow to know which workbook version?
How can you tell what version an INE workbook is? I see comments here about Workbook versions 5.0 which I dont understand. When I look in my R&S workbook PDFs I dont see any information about the...
View ArticlePDF documentation available during lab?
HI A lot of the configuration guides in Cisco routing and switching have a PDF on the same page that you can open to view the documentation. Are the documentation PDFs available during the labs? thanks
View ArticleACE Module
Hi,Today i was listening to Mark snow on one of his lectures on UCS and he mentioned that their is a separate class on configuring ACE module. Can anyone point that out where i can find that complete...
View Article