Appriciate for all and any help that will lead to read the cisco doc for...
Hi I am preparing to take the CCIE written exam. Brian mentioned that I should read the cisco documentation which according to the video training would be the link below, but nothing happens when I...
View ArticleClik here to view.
Nexus Lab: MSTP Traffic Engineering
Hi Experts,Do you know why we are using LACP in this particular task? Thanks
View Article6.1 OSPF over Broadcast Media
I've been stuck on this task for the entire day despite following the instructions in the workbook. I don't know what is causing the problem. I have configured the interface of each device in the...
View ArticleFiltering using ACL
Guys,Is it possible to match these prefixes using a single permit statement in an access-list?192.168.5.0/24, .192.168.7.0/24, 192.168.13.0/24, 192.168.15.0/24. I did it with two.ip access-l st...
View ArticleClik here to view.
Real time network require a solution
Hi All, I am currently providing professional services for a Service Provider organization.My manager has asked me to implement the below solution in of our customer's [i.e. a Service Provider] network...
View ArticleLooking for a study partner R&S
Hello, I am looking for a study partner in CCIE R&S.I am in the Washington DC area.Unicast me at anjery@yahoo.com if interested. Jeremie
View ArticleWB section for CCIE DC
Hi INE,Just curious if we are going to have a specific WB section for CCIE DC like for RS? I used the WB section intensively during my prep for RS, i.e. to discuss about the WB solution, problems at...
View ArticleNo circuit/ channel available
Hello everyoneI have created a UCCX application with trigger 4000.Whenever I call this number from PSTN side I am getting this error: Cause i = 0x82A2 - No circuit/channel availableAnyone seen this...
View ArticleClik here to view.
Another DOCSCD & Eth-mask 0x0
Hey chaps,Here is my scenario: Looking at some tasks I often get asked things like this:Allow only the following Layer 2 protocols across VLAN 146 o STP BPDUs (consider both ISL and 802.1q trunks)o...
View Articlev5 lab availability
Probably a stupid question, but does INE have a timeline as to when they'll be updating the workbooks and lab's to the version 5 materials? I'm guessing v4 will remain available until June, but I'm...
View ArticlePort Channel from FI showing down.
Did some labs today and had 2 questions: 1. When we enable the 2 server ports on both the FI's , we start seeing the chassis with the servers. From both the IOM/Fex there are Port Channels to the blade...
View ArticleBGP Regular Expression
How do you write a BGP regular expression to match prefixes that are 3 autonomous systems or less away in ONE sentence?
View ArticleHappy Holidays!
Happy Holidays (whatever it is that you celebrate)! Thank you INE and the rest of the community for this year's training, teamwork, and efforts. I want to wish all of you happy holidays and a happy...
View ArticleIne tokens
Hello, I have 443 tokens which I will not use anymore and I want to sell it.I want to sell it for 200$.If anyone is interested, please tell me. Thank you,Ioan Branet +40743286118
View ArticleCall Blocking Exemption in CUCME
Hello All,I would like to exempt few dial patterns from call blocking and I know how to do it "Configuring Call Blocking Exemption for a Dial Peer" in the CUCME Admin guide, but I am not sure if this...
View ArticleUCS addon: configuration backup
Hi,Could anyone tell me if there is a way to save configuration from a UCS in order to restore it later? On INE racks of course, not in production environment. I know that there is a way to do so via...
View ArticlePriority percentage.
Experts,If I define a Priority percentage for voice traffic and if voice traffic is not using that bandwidth, then can other traffic types can use that unused bandwidth reserved for voice?
View ArticleConsole Server Hardware Suggestions
Hi, I am currently using Digi Etherlite device which acts as the serial console server and recently I have been facing a lot of problem with this device. My lab is placed in the office and most of the...
View ArticleQuality of newly added racks
Hello all,If you've been so lucky to use the newly added DC racks (dcrack5 through dcrack8), you've might noticed a poor quality of the racks. I've so far opened at least 6 emergency tickets with...
View Article1.1 - STP Root Bridge Election
The task for 1.1 includes: "Ensure that SW2 is the primary STP root bridge for VLAN105"The SG shows spanning-tree vlan 105 root primary as the solution. Can I assume that setting SW2's STP priority to...
View Article