3.2 BSR Config
Can someone explain why the SG has "priority 100" defined for R4 in the command:ipv6 pim bsr candidate bsr 2001:CC1E:1:404:21E:BEFF:FE7F:C40B priority 100Is that needed?
View ArticleTask 4.3 (OSPF)
This is really confusing... the question states:• Configure OSPF area 0 on the Frame Relay link between R3 and R4.• Do not change the default OSPF network type.• Do not use any network commands.•...
View Article2.4 - BGP Conditional Advertisement Problem Encountered
Hi Folks,Topic 2.4 is around BGP conditional advertisements. Upon checking my work in the solutions guide, i found my configuration to be identical. R2 properly removed the advistement of the prefix in...
View Articleprocessor and memory for dynamip
G'day all,Could somebody tell me required processor and memory size to run ine dynamip labs?
View ArticleMono Spanning Tree
Hi Please explain for what Mono Spanning Tree is and what it does in very simple way. RegardsAhmed
View Article1.42 voice vlan
OK, it's almost midnight here and I had a pretty bad VERYlooooong day. I thought that, because of my mind state, my eyes were playing me tricks. But they weren't.I was configuring the tasks for...
View Articlebandwidth consumption for g729 call
one g729 call has two directions, and means two rtp streams out of there. As I know one stream consumes 24k including Layer 4 and Layer 3 headers. what is the total bandwidth usage for that,? 24k or...
View ArticleSwitch 2 Missing VLANs
Maybe a dumb question, but switch 2 has no vlan config when I loaded the Vol2 Lab 2 configs...is this correct?It comes up as VTP mode client, but no password or domain.
View ArticleRequird devices for CCNP voice
Hi all ,My name is Mansour and i have CCNP voice and I would like to have home lab for ccnp voice so i can practice more Kindly if some one can tell me about the required devices for ccnp level that...
View ArticleVOL3 Lab3 Task 2.1 - SG Missed out F0/4 on SW2?
Guys,I just want to confirm if SG (v5.10.001) for task 2.1 is missing VLAN assignment for port F0/4 on SW2? SW2int f0/4 switchport mode access switchport access vlan 43Thanks
View ArticleVol.3 Task 3.4 - version4.51 - PPP IPCP
I need a little help understanding some things here. I'm not the best at PPP IPCP and I think Vol.1's explanation is a bit terse.If we had a task requirement of: "Configure serial0/1/0 on R5 with the...
View Articleinbound dial-peers (POTS & VoIP)
Hi everyone, I recently watched ark Snow's CVOICE videos & I have a question regarding inbound dial-peers. During a video, Mark configures a POTS dial-peer with "incoming called-number ." and...
View ArticleCSR1000v 3.11 on Amazon AWS!
The CSR1000v is now available through Amazon AWS! The only version available is 3.11. Just wanted to share here as I found this amazing =) Its a ready to deploy AMI that you can find in the...
View ArticleAppriciate for all and any help that will lead to read the cisco doc for...
Hi I am preparing to take the CCIE written exam. Brian mentioned that I should read the cisco documentation which according to the video training would be the link below, but nothing happens when I...
View ArticleUsing Notepad in the Exam
Folks,I just want to poll for some information based on people's use on Notepad during the exam. I read last night that typing all your configurations into Notepad prior to deployment can help. To...
View ArticleClik here to view.
Failed 1st attempt
Friends,i just took the lab exam yesterday and i failed the 1st attempt. I am of course, furious. But with Cisco Systems. A bit of order.When i went to the bootcamp back in August in London i had just...
View ArticleCCIE V5 reading list
Hi to all i'm planning to start to study for the CCIE this next year, but cisco changed the version :S , so this makes the things hardersI don't know exactly what i can read.what book do you think i...
View ArticleIssues in ACE lab
Hi All, just wondering if anyone has had the same issues as me with the ACE lab - this is namely, I cannot test it, as I am unable to ssh into the Apache web servers from the 3750 to change their...
View ArticleUCS Addon: configuration backup
Hello All, Could someone tell me if there is a way to store full UCS configuration backup ifrom INE Racks n order to restore it next I have a booked lab? Tried to do it via Control Panel, but it only...
View ArticleRack Rental tokens for sale.
I have taken a new position at work, that focuses me on IT operations and out of the technical field, so I dont have the need for my tokens.I have 1536 tokens left that I will sell all for $600Or I can...
View Article