How to study for Ccie RS
Hello all, while searching for a structured plan to study for the lab, I came across the following link on one of the...
View ArticleLayer 3 routing between the M1 and F2.
Hi, I am aware that the F2 cards can do layer 3, But if you have M1 also in the chassis, we need to put the F2 in a seperate VDC. That being said, does the F2 disable it`s layer 3 functionality if the...
View ArticleInbound and Outbound TTL threshold control in BGP
In BGP specifically eBGP is it advisable to use "ebgp-multihop" and "ttl-security" command per neighbor basis together for setting both inbound and outbound TTL threshold respectively ?
View ArticleFull lab 1 task 6.2
I'm revisiting this lab and thanksfully I still can't remember what is coming next.I did this task differently from what I remember the last time, and different to the solution provided, which calls...
View Articlecan someone give me the brief of IP routing filtering
hi allwhen I read about ACL, prefix-list, distribute-list and route mapI get confused,ACL is clear for me but I am not able to differnciate between all of them.means when to use one and when to use the...
View ArticleUpdating configuration files for home lab
Hi,I'm hoping someone out there has done this already and can point me in the right direction. I'm working on a home lab and I need to modify the initial configuration files to match my interface...
View ArticleClik here to view.
RA-VPN : Cisco VPN client & ASA (psk) - ping not working..!
I'm doing this lab on GNSThe topology for Remote access vpn using cisco vpn client & asa with preshared keys.asa1 is the easy vpn server.I'm using ASA 8.4network between R1 & ASA1 -...
View ArticleSPv3 Lab 4 task 6.1
why the ip mroute on R2 pointing XR1 loopback through XR2 ? "ip mroute 10.0.0.19 255.255.255.255 10.0.220.20"
View ArticleiBGP Peering in Vol 1
Dear friends,Recently I bought INE WBs and while I pass thru the IBGP section in Vol 1, I bit confused with the IP addresses choosen in each device to iBGP with neoghbor devices,I want to clear out,...
View ArticleVolumn II Lab 7 Task 2.4
The setup: R6 peer with BB1 remote-as 54R6 peer with BB3 remote-as 54 Requirement:. All traffic from local AS to prefix originated from AS 54 should go toward BB1. All traffic from local AS to...
View ArticleBGP knowledge question
I thought this iwould make a nice question for the forum.The idea is to answer the question without labbing it up - it only involves three routers This is the scenario - R1 and R2 are running EIGRP on...
View ArticleSecurity WB1v4 Task 4.4 Unable to integrate ACS with AD
HiHas anyone run into the following problem? When trying to integrate ACS with AD,as per task 4.4 instructions, I always get the following message:"Connection test to 'inelab.local' failed.Further...
View ArticleCisco Attendant Console 7.0 download
Hi all,I am studying Cisco Unified Communications Manager Attendant Console for CCIE voice exam. So, I am looking for Cisco Attendant Console 7.0. Anyone help me for download.Thanks,Thuc
View ArticleFCoE Port Channelling in UCS / Disjoint L2 for FCoE to same switch.
Okay, so strictly speaking, you're unlikely to get this in the lab, as the version of code for UCS does not support FCOE multihop, but nevertheless, it's useful stuff to know!So, the topology is that I...
View ArticleQuestion Concerning Technical Details of Cisco Voice RTP and What It Requires...
Question Concerning Technical Details of Cisco Voice RTP and What It Requires To Deliver Good Quality Voice1) Our Company's "voice guy" CCIE candidate has convinced IT management that Cisco voice...
View ArticleLayer 2 Protocols
Hi AllI have recently joined this Forum and this is my first post. I have one query related to Layer 2 WAN protocols.Layer 2 protocols are Ethernet, PPP, Frame relay, ATM however we use PPPoE or PPPoA....
View ArticleInter-AS Option AB
Have any of you tested out Inter-AS Option AB? Its a hybrid between option A and option B. I have been reading about it and implemented it for the first time in the lab for testing purposes. I must say...
View ArticleRemote access vpn
I have issue with remote access vpn ssl . I can ping the external ASA firewall outside interfaca and i downloaded the cisco anyconnect software successfully. the issue when i try to ping any device...
View ArticleAttempted SP lab yesterday, 9/17/2013 @ RTP
http://ieoc.com/forums/t/26880.aspxWell with reference to the above post, i made another attempt yesterday, 9/18/2013 @ RTP. guess what failed again. Eventually this time it was good attempt, i was...
View ArticleAccess to FabricPath enabled lab
Hello guysAny idea when it will be possible to run a FabricPath enabled lab, as this is an obviously missing part of the current labs...
View Article