Question about the R&S INE videos
So I'm about to start CCIE R&S studies, and it seems that one valid approach is to prepare for the lab exam from the start, and once I start getting close to scheduling a LAB exam ( maybe 3/4...
View ArticleBlocking BGP networks from a BGP peer
I am trying to filter some BGP updates coming in from an upstream BGP peer and have been reading through this.http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a00801310cb.shtmlMy...
View ArticleINE Strikes again....CCIE #40255
Well, It took me two goes around, but I did it. I sat my Lab yesterday and received the dreaded email at 4:21am this morning. About two hours ago actually, im too excited to go back to sleep. After my...
View ArticleCisco 3750 QOS using SRR
Hi all I am studying QOS mechanisms on Cisco 3750.I have a question about SRR (Shaped Round Robin).Does somebody knows how the router classify these mechanisms :srr-queue shapingsrr-queue...
View Article"CCIE Data Center Full Scale Labs (Beta)" Rack Rental?
Hello all,I am preparing to take my lab in August and I have been using the VOD as well as the workbook. I am looking to try the CCIE DC Full Scale Lab workbook. I was looking at the topology for this...
View Articleipv6 trivial question
Anyone got an idea why you're forced to specify full output interface name e.g. Serial0/0 as opposed to s0/0 when running ping test from Cisco routers? Is this pain in the a$$ Cisco specific or...
View ArticlePSTN Router and PVDM
Hi,in my lab i have my pstn router with a nm with a vic2 and another pri card in a wic slot.All pvdm are in the nm. Can i use them and share for the wic pri in the chassis? Thansksmaikol
View ArticleTask 4.9 - Default Routing
Having issues with this filtering. I think I am on the right track with the route-map and the default-info originate. However, I cannot set the ethernet interface in the route-map. Command error...
View ArticleINE for Juniper
Hi folks. Totally off topic, but this is a good group of minds so I'd like some input. A consultant has convinced our Prez that J = C, but at 2/3 the cost. I have no idea if this is true, but if I'm...
View ArticleTask 4.4 Changing OSPF Network Type Why?
Could someone explain to me why you need to change the network type from point-to-point to point-to-multipoint on the Virtual-Template interfaces? From what I could tell it looks like it works fine...
View ArticleCBWFQ clarifications
After studying the technology im a bit confused about the correlation between the conversation numbers and the weights:If you look the table for example:Flow/Conversation NumbersWeightDescriptionBelow...
View ArticleCCIE Service Provider Operations?
Hi guys,I was wondering what CCIE SP Operations is all about. It seems the be a very strange cert. The CCIE that no one bothers with or talks about. Has anyone ever passed it? Or even taken it?I...
View ArticleStack 3750
I have a stack of 3750 see below.I added a 8th switch which is 3750X.It is still in version mismatch.It didn't upgrade automatically.I had a look around and it seems there is a issue the major version...
View Article10.16-resolved
With regard to the verification of this task i have some doubts about the weight obtained on ICMP flow.We have bandwidth explicitly configured on 2 classes(WEB & Scavenger).The user defined classes...
View ArticleFailed first RS LAB attempt in Brussels @2013.06.14
Hi,I wrote about my first exam experienc here, check out :)http://internetworking.hu/2013/06/failed-first-rs-lab-attempt-in-brussels-2013-06-14/Gabor
View ArticleDifference of behavior in NSSA with STUB and TSSA
Why in NSSA, ABR do not originate default route automatically? unlike STUB AREA & TOTALLY STUBBY AREA?
View ArticleMulticast MOH with no multicast-routing
I watched DeepDive module 6 video #55 "Traditional MoH". What Mark said and show there was that if Phones is directly connected to Route/SwitchModule"we dont have to have 'multicast-routing' configured...
View ArticlePackets not getting encrypted
Hi, I have a cisco 1841 having some vpn issues.. Currently I have a Site to site vpn working fineBut the "VPN Server config " for remote clients, I am using so i can vpn into the cisco box does not...
View ArticlePlz share CCIE SEC v4 Success story
Hi,Any one recently passed CCIE Security v4 lab in brussels? Please share your experience with us. Thanks.
View ArticleStorage VDC on Nexus 7000
Hi,Could someone please explain the exact purpose of the FCoE VLAN range when you configure a storage VDC, as the documentation from Cisco leaves somewhat to be desired!In the documentation I have...
View Article