frame-relay setup for ccnp workbook 2009
I have been trying to setup the frame-relay swtich for the eigrp lab in the ccnp workbook 2009. I am using a singe 4 port serial network module as my FR. below is my configuration I thought it would...
View Articlework books
hi all, i am really confused how to use the teh lab diagrams to practise the workbooks.for example i was trying to practise layer 2 topology (bridging and switching ) .in the work books says check...
View ArticleCBFWQ question
Hi experts, I have seen a configuration like this in a blog.policy-map CBWFQclass DNSbandwidth percent 3 class DHCPbandwidth percent 2 class TFTP bandwidth percent 1The weights associated with these...
View ArticleCCIE R&S ATC and Technology specific Videos
Hello Brian, Please let me know what is the difference between the ATC and Technology specific videos in terms of content. I understand we can purchase the Technology specific videos individually but...
View Article4.12 - Loop Prevention
Looks like on R1, we're blocking OSPF->EIGRP redistribution...why?On R5, we set OSPF external distance to 121...why?
View ArticleIEOC and Google Chrome
Just wondering if anyone else has the login link cut in half on the top of the IEOC.COM web page? AndyL
View ArticleAutomatic reply: Binding multiple racks together
Good Day I am currently out of the office with no access to email or phone. I will be back on Tuesday 10 Sept. For urgent assistance please contact Paul le Roux (paleroux@cisco.com). Regards
View ArticleIPv6 GRE tunnel not working.
Hi Experts,I am trying to create a IPv6 tunneling interface between 2 routers.R1#sh run int tu 12Building configuration...Current configuration : 136 bytes!interface Tunnel12 no ip address ipv6 address...
View ArticleBinding multiple racks together
Folks, I'm planning on gettting a couple of racks and having them joined up. Has anyone used this before and any thoughts or comment on how best to use them? I'm prob going to book a few 8 hour...
View ArticleDifferences between Logical diagram and solutions in workbook vol.1
Hello,I´ve just started to work with tasks from workbook vol1 (from the first tasks). It´s seems that logical diagram is not completed: there no lables on interfaces for shitches on diagram. For me...
View ArticleFull lab 4.8 VPNv6 UNicast BGP
I was working on this lab last night and my VPNv6 sessions dropped between the CSC customer carrier (r6,7,8). I think this happened to me before but I ran out of rack time so I saved my configs. Now...
View ArticleAutomatic reply: EIGRP SOO
Good Day I am currently out of the office with no access to email or phone. I will be back on Tuesday 10 Sept. For urgent assistance please contact Paul le Roux (paleroux@cisco.com). Regards
View ArticleError in full lab 4 4.10 ATOM
guys, I think there is an error in 4.10 of this lab, it says create a pseudowire between R2 and XR2 however the diagram has SW2 connected to XR1.
View Article255.255.255.255 vs 0.0.0.0
hi allwhen you configure IGP and using network command to turn the process on,you will use somthing like:network 10.0.0.0 0.0.0.0so we are using the wildcard mask to identify the operation to match...
View ArticleEIGRP Stub Routing with Leak Map
In the CCIE R&S workbook 1 (5.18), the requirement is to setup a leak map on R5 to advertise all learned routes except for SW2's loopback0 address. The solution goes to show to do this, you need to...
View ArticleUse of the Suppress FA command in OSPF
In which scenario we will use the below command:R1(config-router)#area 1 nssa no-summary translate type7 suppress-fa
View ArticlePetr Lapukhov - What is he smoking?
Can someone please explain http://s3.www.ine.com/downloads/optimum-time-planning.pdf in terms where us non Petr people can understand? LOLYeah, next to Halabi and Cerf, Lapukhov is a pimp.
View ArticleVPN Through ASA - what to allow & what not ?
In vpn , how do we actually know what should be the interesting traffic... say , r4 , asa2 , r5 are there.. the gre tunnel should pass eigrp 45 multicast packets exchanging info abt loo. then how...
View Article