AS Numbers 1-65535
What I understand is that AS number is 16 bits binary value. Which means 2^16=65536.How comes the maximum value is calculated as 65536-1=65535.
View ArticleCCIE R&S Study Partners over Skype
Looking to form a small study group for studying CCIE R&S. If a study plan is desired for those joining we can go over one. My initial thought was it just use as a means of accountability, meaning...
View ArticleConnecting ASA to Nexus 7000 via fiber
I am trying to connect the ASA (TenGig ports) to the Nexus 7000, but am receiving a Transceiver validation failed error. I know I can remove this error by issuing the command switchport mode...
View ArticleINE Strikes again....CCIE #40255
Well, It took me two goes around, but I did it. I sat my Lab yesterday and received the dreaded email at 4:21am this morning. About two hours ago actually, im too excited to go back to sleep. After my...
View ArticleQoS queue implementation for router and switch
Hi Folks,I have some questions about QoS that maybe someone can help me to understand better.1) A router's interface has a hardware queue and software queue for inbound and outbound traffic. I...
View ArticleFailed first RS LAB attempt in Brussels @2013.06.14
Hi,I wrote about my first exam experienc here, check out :)http://internetworking.hu/2013/06/failed-first-rs-lab-attempt-in-brussels-2013-06-14/Gabor
View ArticleRole Based Addressing
While studying "Designing Cisco Network Service Architectures (ARCH) Foundation Learning Guide", I came across Role Based Addressing. Could you friends please help me understand this. Would appreciate...
View ArticleWorkbook Physical layout and parts list
Hey,IF I choose to build my own lab based on the workbooks, what parts list do I need and how is the gear physically cabled? I built my own R/S rack and I am toying with building a partial DC lab as...
View ArticleTrack state and reachability
what's difference between the options state and reachability on the "track object-number ip sla sla-ops-number state/reachability" command??I run the scenario with both options and the result is the same
View Articlehelp needed: compact flash replacement
I have an 1841 with a 32MB flash card installed which contains the IOS.i have replacement compatible 64MB flash card. problem i have is, how do i replace it ? the slot says -- 'do not remove card...
View ArticleAnyone here take the CCNP SP tests?
I'm wondering how far the INE SP ATC and workbook would get me towards passing the SPEDGE and SPCORE exams. I have no problem reading other material, but I do find that video and labbing helps me learn.
View Article14.8 OSPF Sham-Link
Guys,why routes aren't preferred over sham-link? as per below output, sw1, sw2 prefers route thorugh back-door link. R5#sh run | s routerrouter ospf 100 vrf VPN_A log-adjacency-changes area 1 sham-link...
View ArticleEIGRP Section EIGRP Retry limit exceeded???????
I have verfied I have the correct EIGRP configuration on all of my routers and I keep getting the below error message on R1 and R6. Rack15R1#*Feb 1 06:06:13.107: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100:...
View ArticleUpgrading my lab/getting ready for the CCIE
Hey,So i'm starting to upgrade my lab and i was hopping to get suggestions on what to buy or rather what would be a better buy:So as of writing this i have:1x 2511-RJ (access server)1x 2611XM w/ nm-8as...
View ArticleINE R&S topology working on GNS3 using breakout switch !!
Since I'm a member of INE and have benefited from reading all the forums, I figured it was time for me to share with the community the work I've done in creating a working GNS3 INE R&S working...
View Articlegood lab guide book
Hi Can anyone please tell me how good this book listed below will be for me for my cisco ccna R&S exams and for my future career- CCNA Routing and Switching Portable Command Guide?I am preparing...
View ArticleISE Appliance or VM
I'm currently working my way throught the ISE Primer. In the first video he has to reboot to solve the ISE Application Server process hanging. I have similar problems with my company's VM...
View ArticleBGP Confederations - MEMBER-AS vs SUB-AS
I see the term SUB-AS being used mostly. But MEMBER-AS is used some places too - mostly RFC 5065. I am correct in thinking these two terms are the same? "An Autonomous System number which is only used...
View ArticleCME 8.6 and IP Phone time difference
Hi, I have installed CME 8.6 and registered phones of Model Cisco 7942. I found that Phones showing the time in UTC only not the local singapore time . Do any one know wt needs to verify in config......
View Article