mls qos
Hi Guys, I am ccie from this forum, i am doing qos for a voip (lync) project and struggleing with the mls qos LAN side of the qos, I would like to reserve 10% of the link ( edge dis core) for voip...
View ArticleISIS packets and QoS in IOS-XR
I need to confirm a couple of points on ISIS, specifically running on ASR9000 with IOS-XR in an MPLS network.First am I correct that ISIS uses CLNS for its transport protocol on IOS-XR, same as IOS?And...
View ArticleCCIE DC VS CCNA-NP DC study materials
Hello IEOC forum I used to to work Linux, windows and virtualization environments (Vmware and RHELV) and normal networks now I'm working in another enviorement and they are planning to change the Data...
View ArticleDisabling PHP in MPLS L3 VPN
Dear Experts,I know that PHP (Penultimate Hop Popping) is by default enabled in Cisco & Alcatel-Lucent Routers (I am not sure about other vendors equipments, please name if it is enabled by default...
View ArticleRBAC with {vrf | vlan | interface} policy deny
I've been playing with RBAC and rules etc, and getting a bit stuck with the 'vrf | vlan | interface policy deny' and not sure where it comes into play.I have the following code on my box, and what I am...
View ArticleVOL2 TS1
Guys,I was doing the VOL2 TS1 when I've seen the question below : Resolve the problem preventing R4 from reaching SW2 over the shortestpath R4 couldn't reach SW4 and be ospf neighbor , because the dead...
View Articleospf distance manipulation
Hey all I am playing around with some redistribution and route manipulation (from Workbook 4 Lab 3, Task 4) I have configured R1 to lower the distance to 105 for ospf LSA's specifically from router 2...
View ArticleClik here to view.
Site-to-Site IPsec VPN not working - Need help Verifying Configs
Hello community,I have configured Site-to-Site IPsec VPN as per the topology shown here but for some reason my routers are not negotiating Phase1 or Phase2. I have checked my configs multiple times...
View ArticleCE to Managed-CE e-BGP peering for multiple services
Guys; Another advice that i seek from you guys. So now i have a CE device connecting to our Managed customer facing node taht i call managed-CE. I have two vrfs on managed-CE, vrf-SERVICE-1 and...
View ArticleProblem with GNS3 + USB to Ethernet setup. Please help.
Hi,I'm new to the forum, just started the CCIE journey. Have 2x3560's, 2x3550's, the routers are virutal (GNS3). Now, in GNS3 I connect the clouds to my usb-to-ethernet adapters which are in turn...
View Articlebgp synchronisation
hithe rule say If your autonomous system is passing traffic from another AS to a third AS, BGP should not advertise a route before all routers in your AS have learned about the route via IGP.does mean...
View Article7.14 BGP Redistribution Internal
HiSomeone could explain me why in the solution there is the "network 155.x.146.0 mask 255.255.255.0" statement under the BGP process of R4 and R6?Thanks!
View ArticleIpsec tunnel reset
This is a production related issue. I want to reset IPsec VPN tunnel with a specific peer. We've 50+ VPN peers and don't want to impact any other peers except one. I want to reset the tunnel...
View Article7.47 AS300 still transiting traffic between AS200 and AS100
Part of this task is prevent AS300 transiting traffict to/from AS200 and AS100. However AS300 is inadvertently used for transit as the the next hop 155.x.45.4 recurses to R3 f0/0 with a next hop of...
View ArticleUpgrading my lab/getting ready for the CCIE
Hey,So i'm starting to upgrade my lab and i was hopping to get suggestions on what to buy or rather what would be a better buy:So as of writing this i have:1x 2511-RJ (access server)1x 2611XM w/ nm-8as...
View ArticleClik here to view.
SecureCRT Users - The Magic Login Script for INE Racks is here!
Hello Friends,I've created a small python script to help me login on INE's racks, I am sharing it hoping you will find it useful. This is beerware, please pay me a beer if you find it useful, I won't...
View ArticleCCNP-DataCenter training?
Is there a CCNP-Data Center training on-line course available?
View Article9.9 issue
I am unable to create an ipv6 prefix-list on r5. Rack6R5(config)#ipv6 prefix-list ? sequence-number Include/exclude sequence numbers in NVGENRack6R5(config)#ipv6 prefix-list
View ArticleTask 3.2
Am I correct in assuming this task means that the interface will not show as being down on the sh int status command, but it will be down because the router will not respond to any other inarp requests...
View Article