[help] understanding fast rerouting in eigrp ?
i have been studying about fastrerouting for eigrp, but i have beens tuck on understanding some partsof it.when i tried to read the cisco document regarding this i couldn't able to catch the points....
View ArticlePKI Server on IOS Router
One of the task requirements for R2 is "All client certificates should be automatically granted." Now that seems to translate to the command grant auto. However the command grand ra-auto is given in...
View ArticleProblems with initial mpls.pe.ce.routing.with.ospf
Hi There are some problems with initial mpls.pe.ce.routing.ith.ospf files for R5 , R6 , R7 , R8 etc. Are these config are not compatible with IOS. Thanks
View ArticleDistant IBGP peering when multiple interface available
On the first BGP lab iBGP peerings are formed. Since all Rs have multiple interfaces and IGP reachability to all is present I was expecting that any interface would be ok for the peering,but this is...
View ArticleINE WB timeline
Hey Brian/guys,just want to ask you about some timeline regarding the INE WB Vol I development and also about some other products (if they are available) simmilar to the previous version:INE WB Vol I -...
View ArticleCME Phone calling CUCM phones
Hello AllI am trying to call from a phone registered with the CME to a phone registered with the CUCM--I could not make the call. However other direction it works (CUCM-->CME over the SIP...
View Articlegns3 Topology without switches
Dear All,I want to build GNS3 INE topology without using using any switches except using for interconnections via vlans for example one switch connecting all routers using dot1.q connections.and i will...
View ArticleDMVPN Redundancy Spoke
Is it possible to have spoke redundancy? Ive seen implementations where there are dual hubs but we only have redundancy at the hub in this case. If a spoke is down then that site is completely down....
View ArticleINE DC Rack Rental Limitation
HI guys,I just finished my first INE DC rack rental session with UCS add-on and found few things I could not do:- setup UCSM for integration with vCenter,- VMFEX setup/testing- incorrect rack diagram...
View ArticleGNS3 IOU issue...
I'm a contributor to the GNS3 kickstarter program and recently downloaded and started using the Alpha 8 release. For the most part, everything seems to be working fine. I have no issues when connecting...
View ArticleEIGRP Summarization
Hi All, I Got issue on EIGRP summarization task . Ater 4.0.0.0/22 ip summary command on On Router 4 interface Tunnel 0 and e0/1.45 ,4.0.0.0/22 route output Expertated see on R5. my lab output is...
View ArticleSANboot issue dcrack1
Hello guys, I'm having an issue with dcrack1, i cant get the server ESXi to boot.I have set up the serviceprofile according to the INE labguide, the server is named ESXi and the vHBA im using is fc1...
View ArticlePKI Server High Availability on IOS Router
Just though I would share some experience I had with the following lab. R1 keept getting stuck with the CA server disabled and the message "Server is configure for redundancy, but redundancy is still...
View ArticleStarting CCIE today! Questions...
Did my CCNA, CCDA, CCNP and CCDP in the last 10 months, starting the CCIE trip for the next 7 months. Built my home lab adding more hardware as my networking skills are progressing. How is the written...
View ArticleModifying OSPF route cost without IP Ospf cost command
Is it possible to modify the cost of an OSPF route without using the IP OSPF cost command? (Not referring to default route originated by stub commnd)
View Articledynamic crypto map
Hi. I have a question regarding this document from Cisco.com about creating dynamic crypto maps....
View ArticleStateful NAT with overload
Hi. I'm trying to test the stateful nat with "overload" keyword, on Cisco 3725 Adventerprise 12.4(15)T7, but it seems that these fuatures are matually exclusive! I mean when I use "overload" keywork, I...
View Articlemac-address learning on trunk port
I have connected two switches sw1 and sw2 using two ports i.e. f0/1 and f0/2 sw1=================sw2 f0/1 mac a1 f0/1 mac a2 f0/2 mac b1 f0/2 mac b2 now sw1 is root but when...
View ArticleCan we use Network id in below scenario?
Dear All, Can I assign my cache [J5K] with a Network ID in below scenario ? as I have /30 only for the connectivity.
View Articledebug auto-rp messages
Hi, I have the following configuration on the routerip pim send-rp-announce Loopback0 scope 5 group-list 1 interval 30access-list 1 permit 238.0.0.0 0.255.255.255access-list 1 deny any On enabling...
View Article