ASA Threat Detection
I am confused as to how the burst rate is calculated. If we take the following formula in input the values from the example it comes up with a different number than is given in the solution.max(1/30...
View Article7.4
Configure SW2 to respond to UDP echoes from a network management station with a yet unknown IP address.SW2 should not respond to packets sent to the UDP discard and chargen ports from this network...
View Articlev5 Initial Config: Find/Replace String In All Text Files At Once (OS X)
The following command will change the interface type in the text files, or any other string in the files.I downloaded the folder and ran the following command from terminal to change all the interfaces...
View ArticleEIGRP WIDE METRICS
Regarding the above post i believe that formulas provided by Cisco documentation are not clear in terms of metric calculation.I spent several time doing tests and understand how to derive the exact...
View ArticleRedistribution Case
Hello I'm wondering when the Redistribution Case will be updated and initial config file is uploaded, I really look forward to detailed exposition! Thanks.
View ArticleFSPF calcualtion and FC Portchannels
How does a FC portchannel effect the FSPF cost calculation? (if at all). would the cost be equal to all of links in the port channel? or will it be equal to all of the links in the port channel that...
View ArticleRS v5 Lab IOU?
So apparently it's all IOU based...Things I cant do on IOU:Any form of SPANUDLDI'll add to this if/when I find other things. But if I can't do this in IOU, I cant see how I would see it in the...
View ArticleMonitor Capture
Hi All, Can someone tell me what version of code the monitor capture that Brian uses on his videos is limited to? He uses the cmds below R1#monitor capture GRE match any interface gigabitEthernet1.13...
View ArticleNHRP routes not apearing in DMVPN phase3
Hi all,I'm unable to get NHRP routes in routing table and the % for NHRP next-hop overide.IOS version used on real equipments: Cisco 2811 Version 15.1(4)M8, RELEASE SOFTWARE (fc2)HUB config:interface...
View Articlev5 Initial Config: Find/Replace String All Files (OS X)
The following command will change the interface type in the text files, or any other string in the files.I downloaded the folder and ran the following command from terminal to change all the interfaces...
View ArticleVTP pruning question
[Edit]: I REALLY need to stop posting after my brain is fried from messing around in some labs..wrong subforum (sorry all!)Do the VLANs have to have ports configured in them to request not to be...
View Article[help] understanding fast rerouting in eigrp ?
i have been studying about fastrerouting for eigrp, but i have beens tuck on understanding some partsof it.when i tried to read the cisco document regarding this i couldn't able to catch the points....
View ArticleBuilding INE's RSv5 topology with physical switches
Use this thread for discussion on building INE's CCIE RSv5 topology using physical switches.Details of INE's RSv5 topology can be found here.Details on LAN Access Switches can be found here.This thread...
View ArticleTicket 7
Ticket 7• R2 cannot establish BGP session with SW2. Do not change the peering addresses to resolve the issue: I configured the neighbor x.x.x.x disable-connected-check but since there is an INBOUND...
View ArticleQuick question about SAN-A/SAN-B
Hey guys!! Quick question. When everybody says SAN-A/SAN-B or Fabric-A/Fabric-B separation that means, for example, server1 having it's HBA port1 on vsan10 and port2 on vsan20? Thanks!
View ArticleOSPF filtering with route-maps - anyone get it working filtering on...
I spent ages on this - tried to get it working using a route-map that matched routes advertised by R4 using the route-source in the route-map, but no joy whatsoever. Anyone else have any success using...
View ArticleGRE Tunneling
Hi In verification section of Gre Tunneling which is R1#monitor capture GRE match any interface gigabitEthernet1.13 bothThis command doesnt exist, Am I using worng IOS , though its same as recommended...
View ArticleINE WB timeline
Hey Brian/guys,just want to ask you about some timeline regarding the INE WB Vol I development and also about some other products (if they are available) simmilar to the previous version:INE WB Vol I -...
View ArticleDMVPN Phase 3
Hi, I have a doubt, I was practicing DMVPN Phase 3, MY quetion is that why "ip nhrp redirect" command is required in Spokes, without this command its working, but in cisco documentation ip nhrp...
View ArticleUCS LDAP Configuration
Folks,I have a question re: LDAP for UCS. Does anyone know, if in the lab we get tasked to do an LDAP config, whether we will be told the BaseDN is a CN= or an OU= ?This is quite important...
View Article