Clik here to view.
Building INE's RSv5 topology on CSR1000v and Physical Routers
I have seen a posts for CSR1000v, Physical Routers, IOU, GNS3. but haven't seen somthing for those of us how have Physical Routers v4 CCIE and want to make that investment to be v5 ready.
View ArticleL2VPN AToM (ATC Vid#31)
Setup GNS3 0.8.6IOS: 12.2(33)SRE1IOS-XRv: 5.1.1I can’t ping R8 10.0.0.8 from R1 10.0.0.1. Looking at packet captures, I can see ARP requests from R1 hitting R2’s f1/0 and exiting R2’s f0/0.34 with a...
View ArticleEGIRP issues on Router Sub Interface .. Convergence Takes longer ..
Hello Evereyone , I am going to through Brian's INE CCNP route (EIGRP) recording and I have same INE real LAB and during my EIGRP lab practice i notice that convergence takes longer over sub...
View ArticleHQ SW1 configuration
Hi everybody, here is the configuration file of my switch HQ SW1: ! !version 12.3service timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname...
View ArticleINE WB timeline
Hey Brian/guys,just want to ask you about some timeline regarding the INE WB Vol I development and also about some other products (if they are available) simmilar to the previous version:INE WB Vol I -...
View Articleospf sham-link
The default R7 config creates an ospf process with an assigned VRF (VPN_A). it's uplink to the PE (g1.67 to R6) is also in the same VRF. as such, I don't see how you can see the ospf routes outside...
View Articleissue with: Inter AS MPLS L3VPN Option C - ASBRs Peering BGP+Label
Hi, After watching the video I build the lab my self-according to the same diagram used in the video with the exact same setup. I tried to follow the movie as much as possible to learn the technology....
View ArticleHow are the Mobile Labs?
I am looking to book a mobile lab environment. I am wondering about the experience of other members? Are there any differences/warnings in regards to Mobile Labs? Are they exactly same? I am a US...
View ArticleThrough put test
Hi All, I have to test real through-put on a non-line of sight link(Ethernet), I’m planning to use 1941 router’s in both ends. Now my questions and where I’m hoping for some good recommendations. What...
View ArticleBothersome multicast issue
All, I've had an issue with multicast where all pings/responses are duplicated when testing. For this example, I used a two router sparse-mode setup (source/dest from their loopbacks), pim rp is the...
View Articlerstp
Reading the ccnp switch book, i come across a short paragraph about rstp that says "Any port role can have any of these port states:discardinglearningforwarding Can anyone explain how this is possible?...
View ArticleCCIE R&S Written mock
Hey Guys, I have my CCIE written V5 scheduled in for next month was wondering if any one has found any good mock exams out there? Im using all of Ine's videos and recomended reading but I have nothing...
View ArticleOSPF path selection
Hi All, Please have a look in to the below senario R1 and R2 are directly connected with two links and having IP address 10.0.0.0/24 (ETH 0/0) and 20.0.0.0/24 (ETH 0/1). R1#sh ip int bri | ex...
View Articlelab equipment build for v5 adv workbook labs
Hi,So i'm going to be using IOL for my topology setup to virtualize the devices needed for the routers/switches. I noticed from the v5 workbook hardware overview, it shows we need 4 switches and 10...
View ArticleQoS Policing and Shaping token buckets
Hi All, I've been studying for the written and going over QoS police/shape from a theory perspective. I completely get the idea of policing and shaping, but the token bucket, single and double buckets...
View ArticleR&S v5 Virtual csr1000v Lab with Dell c1100 and physical switches
I want to share my RSv5 build with you guys. I'm running an exsi 5.5.0 host with csr1000v for the routers. Each VM has a virtual serial port configured for telnet access. For the switches I went...
View ArticleIronport Email security Appliance for CCIE security
I am looking to build a CCIE security lab and am wondering if the Ironport C160 Email Security appliance is sufficient for the CCIE security 4.0 lab? If not which appliance should I be looking...
View ArticleBuilding CCIE Security lab
Building the lab is quite expensive, so I am wondering if any of you could share your experiences of how you built your lab. Did you buy all the equipment or was it sufficient buying a few bits and...
View Articlenext-hop-self ALL -- new option 15.1(1)
Playing with the commands for BGP, I found this new option (15.1) for next-hop-self. neighbor x.x.x.x next-hop-self allall(Optional) Specifies that the next hop of both eBGP- and...
View ArticleRecently purchased the ultimate bundle
I'm looking for a bit of guidance on how best to utilize the tools available, should anyone have an opinion.Some have compared studying towards the CCIE like eating an elephant; where does one start?I...
View Article