How to get from Charleroi to Diegem (Cisco)
Hello all, maybe you need infos how to get to Diegem (Cisco location) from Charleroi.Here is how you can do it.After you arrived to Charleroi, take the bus at Exit 4 (you can buy tickets online:...
View ArticleFailed my 1st attempt in Brussels - 02/06/2014
Hello all, unfortunately I failed my first attempt in Brussels on Monday. I felt that I passed the configuration part, but I didn't.V4 is over, so I need to prepare for v5 now.Br,Ferenc
View ArticleClik here to view.
Default Route to VRF
Hello All,I need some help with getting a default route between two BGP peers in my lab. On router PE1 I have successfully inserted a default route into the vrf (MYVRF) and I can access the networks...
View ArticleRoute tagging and Prefering the path
HI,Can advice the other methods we could use for R5 to prefer the path from BB1 and BB3.I tried to tag the routers from BBs and tried to set nex-hop as R1 and R2 for those tagged Prefixes, but couldnt...
View ArticleEIGRP OTP
Hello Team,I'm at the beginning stage of my preparation for v5 R&S exam and referring to EIGRP at the moment. I stuck at below topics--EIGRP OTP point-to-point peering-EIGRP OTP route-reflector...
View ArticleAnyConnect Certificate Error
I am setting up a certificate-based VPN with my ASA using anyconnect ver 3.1 but it encouters this problem. I try fixing it in 5 days but i still failed. Please give me some ideas. Thank you...
View ArticleCan I able to put explicit deny and log at the end of class default?
Hello, Can I mention "deny log" statement under the class default to watch which traffic to be allowed? Will I loose any points if I forgot to remove it at the end of my lab exam? Thank you....
View ArticleADVICES
Guys, I'm lookinf for advices on how to study for CCIE V5, I was on the exam last 2/06 and failed. I'm frustated because I was sure that I passed on configuration section, everything was working, my...
View ArticleCCIE RSv.5 Home lab design
So I am begining the process of building my CCIE R&S home lab. I was looking for some thoughts on the best design? So far it appears the best option would be a hybrid design where I virtualize the...
View ArticleCurious about MAC address!
Hi Guys,I have a simple question !For Layer 3, we ran out of ip addresses so we are on the verge of moving to IPv6.But for Layer 2, and specifically in the case of MAC addresses ..why dont we run out...
View ArticleZBPF Routed Mode task
Dears,In WB1, and in the solution of ZBPF routed mode, we were asked to allow icmp except src/dst 150.1.0.0/16 within the OUTSIDE zone.In the solution, here is the below:ip access-list extended...
View ArticleWhat is the use of keeping VIP in ZBPF?
Hello, What is the use of this command "redundancy 1 ip 136.1.128.15 exclusive" in ZBPF high avialbility? Because I can't see any gratuitous arp requests when changing from active to...
View ArticleUnleashing the CCIE Routing and Switching version 5.0
A great demo was given today by Bruno Van de Werve on a webex of all three sections of the V5 R&S Lab Exam.The Cisco team will post the recording soon to CLN just search for the following at...
View ArticleVideo Demo of R&S V5
Check out CLN for a Video Demo of V5 R&S held by Bruno the CCIE Program Manager. Unleashing the New Exam: Lesson 1: CCIE Routing and Switching v5.0 Lab Exam Format
View ArticleLab Topology for RSv5
Hi AllCan anyone please suggest the Lab topology for RSv5 which I can modelled in GNS3.I have INE Dynamips topology which was for RSv4. Should we use the same topology? RegardsMohit
View Articleios catalyst 6500 support ZBF
the ios cisco catalyst 6500 series support ZBF or we should buy line card ?
View ArticleFoundation Lab 1 now available
Foundation Lab 1 is now posted on the members site. You should see it at the bottom of the Workbook Table of Contents. Questions & comments welcome. Brian McGahan, 4 x CCIE #8593...
View ArticleMock Labs
Hello Since when we can expect to have the mock labs be configured for v5?I have one scheduled June 14th and i would like to know if it will be a v5
View ArticlePassed written. Looking for partner for studies
Hey guys, Prob the wrong forum to post this but I am looking for a partner for V5 studies for RS. I have been doing networking for the last 7 years. Noone at work is at this level in their career, I...
View Articlelatest CCNP videos
In my account, I see CCNP V2 (current) and CCNP v3 (Current).I see the INE.com page indicates that there is a new CCNP self paced course. Is that v4? If so, I don't see it in my account
View Article