Hello,
What is the use of this command "redundancy 1 ip 136.1.128.15 exclusive" in ZBPF high avialbility? Because I can't see any gratuitous arp requests when changing from active to standby mode and its using physical ip address not the VIP. But in ASA it's generating gratuitous ARP's when there is a failover event and lan segment is poiting towards virtual ip address. Can some please clarify my doubt.
Regards
movien
SW1#show ip route 150.1.3.3
Routing entry for 150.1.3.3/32
Known via "eigrp 111", distance 90, metric 156416, type internal
Redistributing via eigrp 111
Last update from 136.1.128.1 on Vlan128, 00:04:14 ago
Routing Descriptor Blocks: * 136.1.128.1, from 136.1.128.1, 00:04:14 ago, via Vlan128
Route metric is 156416, traffic share count is 1
Total delay is 5110 microseconds, minimum bandwidth is 100000 Kbit
Reliability 255/255, minimum MTU 1500 bytes
Loading 1/255, Hops 2