MPLS pratical reference
Hi folks, Are there any pratical example for MPLS like those in BGP command and config handbook/OPF handbook, routing TCP/IP, Cisco Self study IPv6? I am currently preparing for CCIE v5. Cheers, Paul
View ArticlePort Channel Lab
In Nexus Technology labs under classical switching Port Channel Lab is there.on N5K Load Balacing algorithm is: port-channel load-balance ethernet source-dest-porton N7K Load Balacing algorithm is:...
View ArticleCCIE DC Experience
Passed my CCIE DC late last year. Haven't seen many posts around DC although I know many have been passing lately so I decided to post some things.LocationTook a Lab at SJ and at RTP. Between the two I...
View ArticleI'm new to voice stuff and i have a silly question?
Can someone explain to me why do we need Vwic? can i run voice over mpls without the need of vwic?do we use the viwc with directly connected sites with leased line?
View Article5.27 EIGRP Bandwidth Pacing
Quick question on this task... would this be considered a valid solution?int Sx/x bandwidth 308Considering EIGRP uses 50% of the bandwidth by default, if I configure 308kbps as the bandwidth on each...
View ArticleData Center job role
Not sure if this is the right place to post this, but figured I'd try here. My background is in Windows administration and virtualization (desktop/server). I completed my CCNA R&S and CCNA Data...
View ArticleINE DC Rack Rental
Hi,INE rack rental for DC is full till end June. One cannot book for dates July onwards. Is there a way to book this greyout dates. Otherwise one might not use his tokens.Any advice is welcome.
View ArticlePort Channel Lab
In Nexus Technology labs under classical switching Port Channel Lab is there.on N5K Load Balacing algorithm is: port-channel load-balance ethernet source-dest-porton N7K Load Balacing algorithm is:...
View ArticleLabeled IPv4 Unicast not receiving or accepting eBGP IPv4 prefixes
Hi Guys,In Full Scale lab 4, section 4.1, after configuring labeled unicast to 10.0.193.3, XR is not receiving or installing prefixes fromR3... RP/0/0/CPU0:XR1#show bgp ipv4 labeled-unicast neighbors...
View Articlevalid K series for ccie Lab v4 in RTP
Hi Team,I Appreicate ,if some one is providing deatils that what are the K series available in CCIE Lab in RTP ?Thanks,Silva
View ArticleMPLS Inter-AS TE for XR
All,Has anyone solved the issue of Inter-AS TE using Path Computation Element? The issue being flooding across the interfaces between the AS'.Any help you can provide would be greatly...
View ArticleClik here to view.
CCNA Lab Build
I am fortuante enough to have the equipment available to duplicate the lab topology used in the CCNA videos. I made some minor changes to hardware to fit what I had. As far as the routers go, R1 is a...
View ArticleFractional Fast-E and QoS
Hello everyone.I have a question regarding Fractional Fast-E and QoS. If you have a router subscribed to say a 20Mb MPLS circuit, it is advisable (even necesary) to use a FE interface for connectivity...
View Articlehow to centralize the administration of routing protocols !?
hi allthe idea I am thinking about is similar to VTP but for routing protocols,,,if you have multiple routers under same AS,,, Router Eigrp 11, and you want to do some configs on them (per AS),,,is...
View ArticleTraffic-shaping for delay sensitive traffic
Hello, I would like to verify the use of a traffic-shaping policy within an MQC. I was told that you need to apply a shaping policy in order for QoS to always be engaged and not simply during times of...
View ArticleTerminal Server
Guys, I'm trying to put a Terminal Server in the network where I am working, but it is not working.I've connected the cable to the console ports on each device and then create the hosts entries on the...
View ArticleObscure protocol features (OSPF/BGP)
Hello, i am looking for some help around obscure protocol features that are touched on so very lightly or far and few between that i have some trouble retaining their exact use, and sometimes in cases...
View ArticleJust wondering about Nexus
I was wondering if there was plans to have seperate Nexus labs split out of the data center labs. Basiclly like the ACE was.
View ArticleAnyconnect with SCEP auto-enrollment
Hi Guys,I have been trying to configure any connect dual authentication factor with SCEP auto-enrollment. I was successful in configuring everything, including the LDAP-Map group redirection with both...
View Articlet37 fax onramp/offramp
Hi all. first of all, I don't have any knowledge of voice, because I'm an RS guy. but I'm in the process of configuring the T.37 onramp/offramp and need some help. my config is works in onramp portion....
View Article