One Month
I have one month to go before my first lab attempt. I've been through the technologies workbook several times but I have not done anything that resembles the complexity of the actual lab (except for...
View ArticleNX-OS Software Upgrade on Nexus N5Ks and N7Ks
Hi Guys,I am loooking at upgrading our NX-OS software on the Nexus N5Ks and N7Ks.On the N5Ks, we are currently running NX-OS ver 5.0(3)N2(2) and want to upgrade it to the latest ver 7.0(1)N(1).It seems...
View Article[U520 - CME 8.0]How do I transfer an incoming external call to 4 external...
Hi all,As subject, is there a way to transfer all the incoming call to 4 different external phone numbers at the same time?(3 are in different countries and 1 national mobile phone).I tried using a new...
View ArticleTask 2.2 redistribution
The solution talks about changing the AD to for already existing OSPF routes in conjunction with changing the AD of EIGRP to 90 and 109 for external routes on R3 and R4. I do not see why it is...
View ArticleWhen is send community required
For example it is required when we are using MPLS, but in what other circumstances is it required?
View ArticleCSC technology
Just started going through this and i can't shrug off the feeling that it is seems bit odd design in the real world, I would imagine most people would rather purchase a L2 service from the backbone...
View ArticleRouter Bridging with LACP Help!
hi everyone,I just ran into this with my customer. I think I understand why they are doing it, but Bridging is a pretty new concept for me so if can you correct me if you see that I'm heading the wrong...
View ArticleTASK 3.4
3.4. PPP• Configure PPP on the Serial connection between R4 and R5.• Use IP unnumbered for this connection and use the most reliable interface.• Disable /32 prefix generation After using the...
View ArticleStruggle to use this workbook
I am starting wb1 and I find it very frustrating to use and understand. The online format is frustrating because right after the task section, it gives you the answer and there really isnt a way to...
View ArticleMPLS snafu
Doing the lab for OSPF MPLS OSPF CE-PE routing 14.7. I have checked my configs vs. the workbook and everything is working except ONE thing I was trying to change. R5 & R6 are the PE's in the lab....
View ArticleTask 4.11 -- Loop in IGP Redistribution
WB-3 Lab 7 Task 4.11 IGP Redistribution-------------------------------------------------------The solution is not complete. Distance OSPF external 171 This is good to protect external EIGRP...
View ArticleClik here to view.
Manage symmetric routing
Hi, I have a question regarding symmetric routing.As you can see from the picture below, I can easily make routing decision from 50.0.0.0/24 to 30.0.0.0/8 and 40.0.0.0/8 by manipulating the metric when...
View Article2.7 BGP Summarization
In solution, it uses "network 132.1.5.0 mask 255.255.255.0". I think R5 won't send 132.1.0.0/16 to BB2 anymore if F0/0 goes down.Shall we redistribute EIGRP to BGP? In that case, the network enviroment...
View ArticlePolicy Map only matching on the first entry?
Either I am missing something or my config is wrong or it just works that way?I am working on a 3750 switch and trying to police some traffic outbound. There are servers connected downstream of two...
View ArticleCan any one Advise
Hello All,I want to know if any one have done or can adivse that can i use my existing CCIE R&S LAB equipment in the SP as well.I know i do not have XR but i can simulate XR over GNS and connect it...
View ArticleBc and Be Formula
I'm a bit confuse on how to calculate Bc and Be ? And why it arrives to 3200 and 6400? I think I'm lost on Tc value (time) and Te.Per documentation, the Formula is Tc = Bc/CIR and Te=Be/PIRBc = CIR *...
View ArticleEnhanced L2 licence on rack rental N5k's
Unless I am mistaken\being dense or both? the N5k switches in the rental racks don't have enhanced L2 licences. This means no fabric path. can anyone shed any light on this?
View ArticleROUTER ID for OSPF , EIGRP , RIP , BGP
Hi Experts, Pls. share your experience. Is it necessary to configure your router id ( RID ) for your protocols ( OSPF , EIGRP , RIP and BGP ) unless specified to do so in the exam ? Or configure only...
View Article10.27 MQC Peak Shaping
Not sure how it got this value - 64000 6400 6400? thanks Configure R1 and R6 to shape HTTP traffic to a peak rate of 128 Kbps as it is sent out to VLAN 146.Use Bc and Be bursts based on a 10ms...
View Article