Workbooks with TOC?
I'm sure this has been covered before, but is there a way to download the workbooks in a format with a table of contents currently? I'm sure I can find some copies in backup, but, regardless of that,...
View ArticleHQ SW1 configuration
Hi everybody, here is the configuration file of my switch HQ SW1: ! !version 12.3service timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname...
View ArticleRouter Bridging with LACP Help!
hi everyone,I just ran into this with my customer. I think I understand why they are doing it, but Bridging is a pretty new concept for me so if can you correct me if you see that I'm heading the wrong...
View ArticleDMVPN - phase 3 - OSPF
Hi,I'm trying to implement the phase 3 together with OSPF and I found different behaviour depends on IOS version. The new version 15.2 doesn't work but the same config on 12.4 works with no issues:I...
View ArticleClik here to view.
UCS Logical visio (not the physical one from cisco.com)
Hi all, I am drawing a diagram of the data center and would like to use the logical UCS visio stencils as below: I have done a couple of research online , but still can't find it except the physical...
View ArticleTCL srcipt for ping ip range in VRF
Hi,I would like to share a small script for pinging ip range in a vrf using tclsh in Cisco IOS.router(tcl)# for { set i 1 } { $i <= 100 } { incr i } { ping vrf TEST 10.10.10.$i re 5 }The above...
View ArticleGETVPN over DMVPN
Hi,I’m working now with GETVPN over DMVPN and I have some doubts about lab in the WB. I expected the GETVPN encrypts traffic which is sent over Tunnel interface. The implementation presented in the WB...
View Articlezone base firewall
I have three router R1,R2,R3. Router R1 and R2 is running as site to site vpn and R3 running as ZBF. Before ZBF site to site is working. when ZBF is configure site to site vpn is not working. i inspect...
View Articleis this section for ccie security version 4.0 or 5.0?
is this section for ccie security version 4.0 or 5.0?
View Article4.11 Redistribution and Loop Prevention
Can someone explain why SW1 needs to lower distance on RIP? I don't see any other boundary router between this RIP domain and the OSPF domain. My lab session is fixing to end, so I may try to lab...
View ArticleCCIE home lab setup
So i am just starting my CCIE R&S journey and I am looking for advice on how to setup a home lab. What would be the best way to proceed?
View ArticleWBII R&S TS Lab 1 - NAT VRF on R4
Hi,In the TS Lab 1 from Workbook Volume II. I'm having a difficult time understanding (making logical sense) of the NAT VRF configuration on R4.DEFINE OUR ROUTE-TARGETSip vrf VPN345 rd 345:345...
View ArticleTask 5.3 -- Different Solution
Is there any reason why you wouldn't modify the metric inbound on R3 versus advertising them outbound? It doesn't specify which direction the routes need to be, and the solution in the guide doesn't...
View ArticleSection 4: Identity Management, ASA Local Authentication
Section 4: Identity ManagementASA Local Authentication It's not clear to my why HTTP-USER would get locked out after 3 but NO-LOCK would not aaa local authentication attempts max-fail 3username...
View Articlecan I7 4820k run CCIE Tshoot Lab 1 ???
hi allwith reference to this linkhttp://blog.ine.com/2012/10/01/ccie-rs-ts-lab-1-for-gns3/ the topology is large one,I want to purchase new desktop, so would I7 4820k run like this topologies ?the spec...
View ArticleRoute refletors and cluster-ids
I have a query regarding implementation of cluster-ids for route-reflectors. Say, I have 5 routers R1,R2,R3,R4 and R5 with R1 and R2 acting as a route-reflectors for the IPV4 address-family. I...
View Article6.4
As ZBW/CBAC has been removed from v5 (and I dont intend to be taking the lab until July) I went with an ACL for this:ip access-list ex FILTERpermit icmp any any echo-replypermit icmp any any...
View ArticleTask 6.3 - root view
Guys,As an alternative to SG solution you can use special "root" view instead of privilege level. Assigning this view to ADMIN user you can effectively put him into level 15 just like in enable...
View ArticleCCIE#43116 - Passed SP yesterday (April 1st)
Thanks.This story must start with a big thanks to INE for its incredible effort in providing knowledge over anything else and in whatever track you will ever choose. My story starts two years ago when...
View Articleipsec vti issues
Could someone kindly give this a once over. For some reason my Tunnel is not coming up (remains up/down). R1crypto isakmp policy 1 encr 3des authentication pre-share group 2crypto isakmp key BLAH...
View Article