Hi, I'm looking for the configuration guide for E-BGP ipv4/ipv6 unicast peering session. Kindly provide the appropriate link for it.
Thanks.
↧
Recommend cisco doc for e-BGP peering!
↧
R&S v5 Physical Gigabit Ethernet Interfaces
I am asking a very easy question.
In R&S v5 workbook Physical Gigabit ethernet Ports are marked as 1.13, 1.16, 1.161 etc.
Why not 1/1, 1/2, etc
Can anybody explain this.
↧
↧
CCIE Routing & Switching v5 Workbook released N beta
Guys,
Finally INE’s CCIE Routing & Switching v5 Workbook has been release in beta version. Just login to the member page and you will find it there under workbooks section. It's also announced here:
http://www.ine.com/self-paced/ccie-routing-switching/workbooks.htm
Good luck!
↧
discard route created in OSPF ABR
Hi everyone!!
little question abuot discard route generation on OSPF ABR...
we know that this discard route is creatd in routing table for example qhen we summarize by means of the area-range command: the summary pointing to the NULL interface is put in the routing tasble of the ABR
the question is: is this discard route even created when we configure a stub area in the ABR (default discard) or not? I think not, but I'm not sure....
as you know, this behiaviour is important when another fedautl type 5 is coming from the backbone! (the discard route would kill as a result of the distance)
thanks in advance to anyone who will reply!!
BYE
Andrew
↧
Study mate for V5 Lab
Hi,
I would like to create a study group for Lab V5. someone would be interested?
send me your email.
thank you
Dondada
↧
↧
DHCPD: no option 125
Good Day,
What does DHCPD: no option 125 mean?
The DHCP Server is a IOS DHCP Server on a router.
Thanks
↧
New INE 5-Day CCNP Routing & Switching Bootcamps!
Hi everyone,
Just wanted to let you know that INE has just released CCNP Routing & Switching 5-Day Bootcamps!
Both live on-site and online interactive Bootcamp formats are available for purchase. As an added bonus, if you purchase both the CCNP Routing 5-Day Bootcamp and CCNP Switching 5-Day Bootcamp together, you'll save $1,000!
On a budget? No problem! INE offers a variety of payment plan options to choose from at checkout.
Visit INE's website for course dates/locations, and outlines of the CCNP Routing & CCNP Switching Bootcamps. Be sure to reserve your seat today! http://www.ine.com/instructor-led/ccnp-bootcamps.htm
Happy Studying,
Kristen Hansen
Technical Marketing | INE, Inc.
↧
New INE CCNP Routing & Switching 5-Day Bootcamps!
Hi everyone,
Just wanted to let you know that INE has just released CCNP Routing & Switching 5-Day Bootcamps!
More information can be found on INE's blog post.
We look forward to seeing you at one of our upcoming CCNP Routing & Switching 5-Day Bootcamps.
Happy Studying,
Kristen Hansen
Technical Marketing | INE, Inc.
↧
Lab configuration section: time budget for job aid creation
Hi guys,
Lab date is coming up in a few days and I could really use some input on this topic.
In my simulations job-aid creation is taking between 35-40 minutes from start to finish. That seems like a large chunk of time out of 6 hours. It's concerning to me.
I'm Looking for ways to speed it up without cutting corners. It's the building of the task list that comes to the fore. How to make it faster.
What I've been doing in my simulations is prior to doing any configuring:
1. Skim through the workbook, and build a tracking table with a list of tasks and colums for completion status, wether it's core connectivity or not, and the points. I put an + mark next to non-core tasks that look like like quick points and a - mark for tasks that look like time sinks so I can prioritize after building the core.
2. redraw the layer 3 diagram.
3. Draw up the l2 diagram.
When working through the workbook tasks, this seems to be a great setup. But as mentioned it's taking between 35-40m, and that strikes me as *a lot*.
questions regarding creating the task tracking sheet:
a) I've been drawing out the lines. do they provide ruled paper? If not can I bring some in?
b) is there an optimal way to scan through the task list and break it down into a table? I've been taking two passes, one to get the task numbers written down so I have my rows, then going back and reading the tasks to fill in colums. Is there a better way?
Any feedback on this would be appreciated. Thanks.
-h
↧
↧
OTV lab INE rack rental issue
Hi guys,
I'm doing the OTV lab on INE rack 3 right now.
I'm having an issue i hope you can explain to me.
I ahve configured everthing according as described in the workbook. multicast adjacency not unicast adjacancy.
I have an ping with -t running on both PC's.
It takes aroung 4 minutes from i does a no shut on the overlay interfaces in the N7Ks until i get an successful ping reply.
I think it is to long to be acceptable, is it like this in the "real" world aswell or is this having to do with the setup in the lab?
Regards.
↧
RTP v4 six spots just opened for May 31 Saturday
Get em while they're hot... :)
Good luck all!
↧
How do you clean up UCS?
Somebody's configed the ucs. I wanno a clean one. Cleaning UCS from INE's control pannel doesn't work at all.
↧
How do you book Rack8 for testing Fabricpath?
I send my request to support@ine.com. It doesn't work. Actual I have never received any reply email from Ine support.
↧
↧
Some wrong connections at DC racks.
Sometime I met some wrong connections at DC racks. That really brothered me during lab time.
I will make a list here, and fulfill that list each time when I notice new wrong connections.
1, Emulex CNA Server
NICs connect to N2Ks, the NIC lables are wrong.
The NIC which named 'TO N2K1 Port 1' connect to n2k2 port 1
The NIC which named 'To N2K2 Port 1' connect to n2k1 port 1
↧
How to share DC rack
My friend and I are both studying for CCIE Data Center track. We have access to a complete rack to practice (feel lucky). But we are in different phases of studying and trying to figure out a way to share the hardware without interfering with each other. If anyone had done this before, please share your method. We are both using INE workbook. Thanks all.
↧
New INE CCNP Routing & Switching 5-Day Bootcamps!
Hi everyone,
Just wanted to let you know that INE has just released CCNP Routing & Switching 5-Day Bootcamps!
More information can be found on INE's blog post.
We look forward to seeing you at one of our upcoming CCNP Routing & Switching 5-Day Bootcamps.
Happy Studying,
Kristen Hansen
Technical Marketing | INE, Inc.
↧
CCIE RSv4 to RSv5 Transition Technologies
Has anyone been able to log into the class? Has it started yet? I don't see anything but "This class will start Saturday, May 10th at 8:00 AM PST Here" in my AAP Dashboard.
↧
↧
Where to get Jperf for Windows
Everywhere I look to find the download, it doesnt seem to be the one for windows, the instructions always talk about apache. Can someone lead me in right direction? Thanks!
↧
Trunk Mode on FC ports (MDS and UCS)
What is the 'proper' configuration for MDS interfaces facing the UCS? The INE guide instructs us on how to enable VSAN trunking on an FI, which results in the following config change:
UCS-Lab-A(nxos)# sh run int fc1/31
interface fc1/31
switchport mode NP
switchport trunk mode on
no shutdown
On the upstream MDS, the default F-port configuration has trunking enabled (so it won't appear after configuration), so these seem to be a good match for each other:
MDS-1(config-if)# switchport trunk mode on
MDS-1(config-if)# sh run int fc1/4
interface fc1/4
switchport mode F
switchport description FI-A fc1/31
no shutdown
(trunking enabled implicitly)
So here are my questions:
1. What if I don't enable trunking on the FI? I labbed this and all seems to work.
2. Is trunking even occuring on this link? The 'show interface' command only shows F and NP modes, never TF or TNP modes.
3. Is there a place in UCSM to enable other VSANs on an interface? It only allows me to select one vsan per uplink, so I'm not sure whether a TNP configuration is even supported.
Thanks!
Jeff
↧
Full Scale lab1 OTV
In full scale lab 1 section 1.10 OTV.
why they are using ip igmp version 3 in N3k and N4k on the interface e1/10 and interface port-channel 10 respectively.
we already have configured ip igmp version 3 on Join interfaces in N1K and N2K on the OTV edge device.
↧