VTP Prunning
When the switch infrastructure was in a VTP server/client mode, VTP prunning was enabled. All switches were then changed to transparent mode and now I can't disable. I know I need to switch it to...
View ArticleShould I fix it or move on?
On 2.2, I had redistributed my connected interfaces on R3 using a route-map that tied down the two interfaces that the task asked for. When it came down to the end, I redistributed ospf -> eigrp and...
View ArticleBGP Bestpath Selection
Hi All, I have question regarding that part of taskConfigure AS 200 so that all traffic from AS 100 destined to this prefixtraverses the Ethernet segment between SW4 and R5.• In the case that the link...
View Article1.1 allowed vlans
HiConsidering only 2nd bullet point. SG implements it on SW2, SW3 and SW4's trunk links for not allowing vlan 102. The same solution can also be implemented via either of the below two ways1. only...
View ArticleBGP dampening - DOC-CD wrong?
Hi All,I was practicing BGP dampening with a route-map and noticed what looks like an error in the DOC-CD. I forgot to add a piece of config, namely the "set dampening 15 750 2000 60" command in the...
View ArticleINE Dynamips .net File Not Jiving with Initial Configs...Oops
So after banging my head against the wall for too long I realized that the .net file I downloaded from INE (ine.routing.and.switching.topology.5.00.net) does not match the topology in the Lab 1 initial...
View ArticleGearing Up For SWITCH....AGAIN!
Maybe two times is a charm for this brutal exam. Anyone have suggestions on ways to study for this? Focus areas? Also any suggestions on what specific labs to use with the INE CCIE R&S workbooks to...
View ArticleWhich CCIE track is Best for 1st CCIE Exam RnS or DC ?
hello everyone , I m very much confused between the selection for CCIE track I had More Experience on RnS , & r8 now go for CCIE first time .According to expert knowledge & experience which...
View ArticleCCIE DC Courses
Hello Brian/Mark, I have purchased the CCIE DC products (including Technology Labs) last week to learn Datacenter technologies. Currently I don't have any plans of taking the CCIE DC exam (preparing...
View ArticleRegarding CDP
Hi Everyone, In my work environment, we are using Cisco 2960(POE SW) and CE500 POE Switch. And all phones (7940, 7906,8945) are registered in call manager and they got vlan...
View ArticleCUE no user found
Hi all, Going on with cue lab. I'm integrating it with cucme. I have only sip phones in cucme. All working fine.Integration went ok, i can access CUE GUI but going through the wizard it cannot find any...
View ArticleNew Tech: Noise Canceling fiber = 400x faster....
Noise-canceling tech could lead to Internet connections 400 times faster than Google FiberThis is interesting. Short easy read. Bell Laboratories research team. "....Noise-canceling headphones use...
View Article7.18 BGP Bestpath Selection - Weight
I know to most of you, this would be a simple question.I am scratching my head and try to understand how "AS 100" appears when I do a traceroute to 205.90.31.1 when on the first hop (155.1.37.3), the...
View ArticleDifference in R&S Volume 2 vs Volume 2 dynamips
Im two labs deep into VOL 2 and have only been using the dynamips version up until now. I happened to look over at the standard VOL 2 workbook last night and noticed a ton more explination and some...
View ArticleClik here to view.
Task 6.3 COPP
I ran into an obstacle in this task that I thought is worth sharing.ISSUES:----SECURITYTask 6.3 COPP---------- R1 COPP input---------- Rack1R1#sh policy-map control-plane input Control Plane...
View ArticleMPLS, EIGRP with BGP backbone and COST ATTRIBUTE affects
ok - I am REALLY myphed by this concept. According to the lab docs I am working with the Cost attribute of a route redistiributed from BGP into EIGRP keeps the router from accepting EIGRP routes from...
View ArticleBranch 1 Phone Registration Issue
Hi Guys, I always have an issue INE Rack 1 , all the will register except at branch 1 phone its getting IP from DCHP but not able to register with CCM,i have done clear cdp table ,shut and no shut the...
View ArticleClik here to view.
VoiceView Express - 'Requesting'
Hi, I'm trying to get VoiceView working with CUE/Jtapi. I've added the service into CUCM and applied it to the phones. I've also added the phones to the Jtapi Application User. When I press the...
View ArticleAutomatic reply: MPLS, EIGRP with BGP backbone and COST ATTRIBUTE affects
I have limited access to email and voice mail. I will be with you as quickly as I can. I will return to the office June5th
View ArticleAAR and CUC issue : wrong RDNIS...
Hello,Let's look at the following scenario :- HQ is an MGCP gateway (with RDNIS Delivery Inboud checked);- BR1 is an H323 gateway (with RDNIS Delivery Outbound checked).- BR2 is another gateway...
View Article