Cisco360 thoughts?
Although I plan to use INE as my primary study tool for the CCIE lab, I was wondering if anyone had any experience with the Cisco360 program? The only reason I ask is because my employer will pay for...
View ArticleLabeled traffic using ISIS L1 Default Route?
Guys,Is it possible to have Labeled traffic using ISIS L1 Default Route (or any default route)? I guess the only way is to route-leak? I tried "mpls ip default-route" and it doesn't work. ! Network:...
View Article640-802 Videos and LABs
G'Day.I am working my way through the INE exam course videos and I have just started section 5, where Brian is refering to racks and connecting to devices via racks.ine.com. Not being in a classroom, I...
View Articleip inspect
how to apply ip inspect in line vty?i want to limit telnet time to 5 second ip inspect name tel-net telnet timeout 5
View ArticleTask 3.3
The IP addressing used on the diagram for R6-BB1 says 54.x.4.0/24 but in the solution guide it has 54.1.1.6.I changed R6 to 54.26.1.6 and voila I can now ping BB1.I am trying not to use the solution...
View Article3.4 Floating Static Routes
HiAm just curious about the solution provided to this question. I can understand why one would configure an Admin Distance of 20 after the "less preferred" route in order to ensure that the preferred...
View ArticleAutomatic reply: More issues with INE vol3 workbook
HI, I am on personal leave from 30th Aug to 10th Sept and would not have access to emails. If anything urgent please call me L3 Ops on-call on 97386131 or for other issues please contact Yew Lum for...
View Article3.5 shutting FR subinterface causing backup interface being disabled?
Hi Guys,According the the solution guide, we are disabling the frame relay main interface on R4 to trigger the backup interface to come up.However when I try to disbale the frame relay subinterface,...
View ArticleMQC Question
Hello all,I need some clarification with respect to Modular QoS CLI commands.Take for instance, I have the following requirements1. Class VOICE, match with dscp AF42, to get 40% of available bandwidth...
View ArticleAutomatic reply: 9.26 IPv6 PIM BSR
HI, I am on personal leave from 30th Aug to 10th Sept and would not have access to emails. If anything urgent please call me L3 Ops on-call on 97386131 or for other issues please contact Yew Lum for...
View ArticleATC class - 10th Dec
Hi,do you have access to this live class ? My link in member zone disappeared 15 before start timeI tried below one but no success:http://members.ine.com/dash/live/course/2#Is that correct link...
View ArticleTask 4.3 (OSPF)
This is really confusing... the question states:• Configure OSPF area 0 on the Frame Relay link between R3 and R4.• Do not change the default OSPF network type.• Do not use any network commands.•...
View ArticleClik here to view.
Desk Phone Control missing on CUPS server
I don't know if I'm going crazy from all of the studying, or something corrupted, or I'm looking right at it and just can't find it. I can't seem to locate "Deskphone Control" on my CUPS server?? In...
View Article9.26 IPv6 PIM BSR
Hi all,There seems to be a problem with the solution as R5 cannot register with the RP at R6 due to RPF failure.Adding the following seems to fix the issue:ipv6 route fc00:1:0:4::/64 Serial 0/1/0...
View ArticleRouter-switch Christmas sales up to 80% off
Amazing! Router-switch annouced huge disscount up to 80% off to celebrate 2013 Christmas Day.So during the big sale days (from Dec. 13th, 2013 to Jan. 24th, 2014) Cisco buyers can save much more money....
View Article4.10 - Loop formed due to 7.1
Folks,For 7.1, I needed to configured SW1 and SW2 to support IPv6. In doing so, I caused a loop to form between R4 and R5 for all the prefixes directly redistributed into EIGRP on SW1, SW2 and R6. In...
View ArticlePetr Lapukhov
Much respect to Petr. But the way he explains stuffs is really hard to understand. I am more confused after reading it. Does anyone feel the same?
View ArticleQOS POLICING
Sometimes i have difficult to understand when is the right moment to use the "police rate" command instead of "police cir" command.Seems that the police rate command should be used for control plane...
View ArticleTe-tunnel
Hi, I am trying to load-balance the traffic across 4 links between PE using TE tunnel created we have 3 STM link and 1 Gig link . GIG link traffic loadshare count is 10 , where as STM link load-share...
View ArticleMULTICAST-RPF FAILURE ISSUE
Hi,I am having problem with multicast to make this work.My topology looks like:R1--s0/0.1-----FRME-RELAY------s0/0 R2-------s0/0-----R3 R1 can ping 225.25.25.25 on R3, but cant ping 239.39.39.39 on R3...
View Article