Task 1.4
I am wondering if the configuration below would be valid for answer the task 1.4 assuming that we dont need to send trap to any syslog server.So, here is the configurations:Extended MAC access list...
View Articletask 3.5 - chap null authentication
The SG uses 'username Rack1R2/R4' as usernames but the initial config hostnames are RSRack1R2/R4?
View ArticleVRF import and export maps
Evening allI am doing some RS workbooks to cover MPLS, BGP etc in some more detail. For anyone who has them or has used them I was doing 14.5 MP-BGP Prefix Filtering. The task asks you to create...
View ArticleMPLS forwading problem on SONET cards of 12000's
Problem with MPLS forwarding on XR1:Lab4 topology, route from XR2 to R4 goes: XR2->FR->XR1->VLAN->R3->VLAN->R4Ping won't come through:RP/0/3/CPU0:XR2# tra 10.0.0.4 so 10.0.0.20Sun Sep...
View ArticleTrade offs on what Routers to use where in Home CCIE rack
Ok, so I am building my Home lab to do my CCIE hands on study. I am going to use the INE rack as the base (6 Routers, 3 BB/FR, 4 switches + Terminal Server). The question is what to use as which...
View ArticleCCIE Voice lab - RSVP configuraton - Error: not enough bandwidth
I configured CorpHQ, Branch1, & Branch2 with identical RSVP & MTP configurations in both the gateway & CUCM, however, when I attempt to make calls to/from Branch2, I get a NOT ENOUGH...
View ArticleTask 2.2 OSPF - Why "ip ospf network point-to-point" on R5's S0/0/0 FR...
Hi Experts,The SG for this task specified "ip ospf network point-to-point" under int S0/0/0 of R5 and R4.Is this requirement mentioned in the task? Am I missing something?ThanksAlex
View Article2.2 OSPF Tunnel 0
R2 is in both Area0 and Area1 but R5 is not in Area0. Why are we advertising network 141.1.25.0 in R5 in Area0.For R2 it sounds ok but for R5 needs a reason.Thanks en avance
View ArticleCCDE vs CCIE R&S
hi allI have seen CCDE topic list and got to know that most of them are similar to CCIE R&S.is their big different between these certificates.
View ArticleUCS Platform Emulator
What is the best version of the UCS Platform Emulator to practice with? 2.0(2q) or a 2.1 release?
View ArticleDC Rack Rentals - Date Rollover?
Hi Does anyone know what time of the day (and time zone) when the rack rentals systems rolls over to the next day? I know I'm not the only one out there who is having difficulty booking lab time...
View ArticleClik here to view.
OSPF control traffic and redondancy
Good afternoon every body;My first probleme is that, i want control trafic between network located in London and those in Mexico as shown in the scheme, so i want nework 10.1.12.0 and 10.1.12.0 use L1...
View ArticleSecurity WB1v4 Task 5.53 - Identity Firewall
HiHas anyone tried to do the Identity Firewall task? I think I've configured everything right, but the test-pc is logged in with the "ineadmin" user, and I was unable to log in with "user1" (I don't...
View ArticleSecurity WB1v4 Task 4.4 Unable to integrate ACS with AD
HiHas anyone run into the following problem? When trying to integrate ACS with AD,as per task 4.4 instructions, I always get the following message:"Connection test to 'inelab.local' failed.Further...
View Article10.63, pass-through marking
the second requirements of this task is preserving the CoS value while trusting IP-precedence. but "mls qos trust ip-precedence" command does not have this keyword; and the solution uses "mls qos trust...
View ArticleCUCM High CPU Spikes and Utilization
In my two previous INE rack lab sessions (8-25 and 9-8), I was assigned Vorack2. Both times I experienced heavy latency with accessing all of the UC servers. all of the UC servers were extremely slow...
View ArticleUCS IOM/FEX in Lab
Hi, does anyone know the model of IO module within the 5108 chassis in the lab? It's not listed in the Hardware list.It probably doesn't matter that much, as really the only thing you can do is the...
View ArticleAutomatic reply: RE: UCS IOM/FEX in Lab
Thanks for your email. I am currently out of the office. For any urgent engineering issues, please contact Cisco Logistics - http://www.cisco.com/cisco/web/siteassets/contacts/index.html
View ArticleSo there are 13 nodes to begin IEWB?
1 R1 2 R2 3 R3 4 R4 5 R5 6 R6 7 SW1 8 SW2 9 SW3 10 SW4 11 BB1, aka FRSW12 BB213 BB3 Little bird told me someone might...
View ArticleCSC vs l2vpn
Hi Everybody While preparing on CSC It happened to hit me, why need this additional complexity of CSC, why not just use l2vpn(ATOm) between the POPs and be done with. Anyway if CSC is used ,the...
View Article