2.8 BGP: Med is Non-Transitive versus no-export?
I have a doubt about this configuration. The SG uses the MED attribute to BB1/BB3. As others have discussed, it is possible to use other attributes (i.e. local-pref), but let's go with the SG...
View ArticleSelling my CCIE Lab
Selling my CCIE rack which consists of the following routers. 2 - 3560-482 - 3550-484 - 28112 - 37451 - 2801 4 - 2500DM me for more details interested. I am located in the midwest of the USA.
View ArticleCisco 1760 router will not recognize wic1-dsu-t1-v2 card in slots 3 or 4
I am attempting to use a Cisco 1760 router for a Frame-Relay switch in the CCIE Voice lab. It recognizes wic1-dsu-t1-v2 card only in slots 1 & 2. Never saw this before where the same card would not...
View ArticleINE-VO-DD-WB-Vol1-Mod1
Hi All,I am trying to do the Lab at my office Rack and once I load the .tar file and do all the initial configuration and yet, when I try to call from the HQ to PSTN (911) I get reorder tone along with...
View ArticleI have passed my CCIE SP lab in Brussels on 14 August 2013
Dear all, My name is Chris Lau and I have passed my CCIE SP lab in Brussels this morning with first attempt. The exam center and the protoc are excellent with the highest professionalism. Seriously,...
View ArticleBB1 serial Setup
I am trying to cable up and is confused with the serial cabling. I have 2 WIC-1T and NM-8A/SWhen I look at bb1,txt, I see it runs from serial 0- 9 ( serial 7 and 8 has no ip)On which wic do I start...
View ArticleClik here to view.
Passed the written exam today!
adeelmpk:All the best for your exam ! Keep updated how you get on.Just returned from the exam! 965 points - PASS!! I was well prepared and the questions were not that complex as I expected. So I can...
View ArticleBoson netsim 9.0
I was thinking on getting this just for my work computer, then building some kind of lab at home. Has anyone looked into this product for ccnp. My problem is most of my study time is at work(during...
View ArticleTraffic shaping statistics.
Guys,I have a configuration like this.policy-map SHAPE_32KB class class-default shape average 32000R2#sh run int s0/1 | i service service-policy output SHAPE_32KBI have traffic that is flowing outward...
View ArticleCisco 1760 router will not recognize wic1-dsu-t1-v2 card in slots 3 or 4
I am attempting to use a Cisco 1760 router for a Frame-Relay switch in the CCIE Voice lab. It recognizes wic1-dsu-t1-v2 card only in slots 1 & 2. Never saw this before where the same card would not...
View ArticleTraffic shaping query
Hi Experts,I have a query regarding how traffic shaping and queueing work hand in hand. Let me explain my understanding. Please correct me if I am wrong.R1#sh int s0/0 | i BW MTU 1500 bytes, BW 1544...
View ArticleDifficulty of INE's lab and the real exam.
After i failed my attempts,i found that the difficulty between INE or ip expert and real lab are not on the same level.And even the real labs are pretty inconsistent.Are you guys planning to update...
View ArticleMPLS label
Hi,Apparently, cef detail for vrf A doesn't show the transport label. It does reflect VPN label though. Rack1R5#show ip cef vrf A 150.1.7.7 detail 150.1.7.0/24, version 94, epoch 0, per-destination...
View ArticleSECURITY- FIREWALL HOLE
Hi community,I strougle with security issue.Briefly is about configuring a hole on the router to allow user to connecte to all others routers once they ar authenticated. But I get this message...
View ArticleI am looking for pen tablet to draw the topologies
hi allalthough this is not technical post, but I appreciate if someone can help me on this.I want to draw the topologies while I study, and I got boring to use so many A4 papers,can some one please...
View ArticleWhy MTU not A Metric in EIGRP
Although MTU is included in the routing table updates, it is not a routing metric used by EIGRP or IGRP.Default K Values:K1 (bandwidth)=1K2 (load)= 0K3 (delay)=1K4 (realibility)=0K5 (realibility)=0Why...
View Article8.21 stub
I'm puzzled on solution to this task : Configure R3 as stub router with Sw1 emulating host. Okay, to configure stub i'm heading over to DOCCD here and read example on Example Implementing Multicast...
View ArticleDo I need to enable iBGP between mulithomed CEs on a L3VPN site?
I have a multihomed L3VPN scenario as below:PE1 -- eBGP -- CE1 ----+ | | |VPNv4 OSPF CE3 | | |PE2 -- eBGP -- CE2 ----+ on this case,...
View ArticleMPLS 101 - Missing something
Hi all I am having a problem understanding an issue I have and in particular the verification of the issue. The setup I have is based on the INE R&S topology but I have constructed a diagram which...
View ArticleCCIE Voice 10-Day Bootcamp | Oct 7th - Oct 18th, 2013 | Los Angeles
Anyone else attending? I am all signed up. Would love to hear from the other students !
View Article