Can we use hidden command in real lab ?
If there's requirement and we know hidden command can accomplish that task, can we use it and get full point ?Is the hidden command saveable and apply during reload ? If the grading script only verify...
View ArticleTASK 13.26:TCP Load Distribution with NAT
Is there any added benefit to creating the pool the way the SG does it? or is it just there to show us an alternate way ? SG did it this wayip nat pool LOAD_BALANCE prefix-length 24 type rotary...
View ArticleNPV Traffic-maps
Hi guys,So, I know what they are and what they do. What I am wondering, is if anybody has any real world scenarios in which they needed them? If so, please share! :-)Thanks!Jason
View ArticleUCS KVM Management IP Pool (ext-mgmt)
I'm currently on site this week doing a UCS install, and I must admit, I've come across something which has just been taken for granted in the past. It's the IP Pool for ext-mgmt (i.e. the KVM IP...
View ArticlePassed my Voice Lab in Sydney
HelloI passed my voice lab in Sydney finally, after 2 years of study. This is my second attempt. Especially when I am new to enterprise ip telephony, Mark Snow deep dive sessions helped me immensly to...
View ArticleClik here to view.
Question about PIX firewall in GNS3
After i added pix ios firewall and added activation key and serial key from my real firewalli added pix firewall to my topology and run the simulatorbut i got this message Network error : connection...
View Article7.4 VRRP Address to use
Just notied that the WB doesn't specify the IP to use and as R6 is the current DG I set the IP to .6.The issue with this is the following error about not being able to use tracking when the DG is set...
View ArticleFRTS Bandwidth and clock rate
Hi Everyone,I am on Vol. I QoS 10.20 regarding Legacy Frame Relay Traffic Shaping.In the question you ask to configure R1, R2 and R5 physical connection rates with 128Kbps, 384Kbps and 1536Kbps...
View ArticleCan't load SP .net file
When I try to load the service provider .net file it fails, saying: === GNS3 0.8.4 traceback on 10 Jul 2013 13:48:02 ===Traceback (most recent call last): File "GNS3\NETFile.pyo", line 648, in...
View ArticleUnity Connection 9.x or 7.x
Hi All,This Scenario is concerning Unity Connection (7.x or 9.x) integration with CUCM (7.x or 9.x). This is what need to be accomplished;Users would dial a Pilot number on Unity Connection, e.g 8001,...
View ArticleRegarding CSS list
Hi Everyone, I want to submit the report to my company, with all DN's in all clusters which contains DN,First and last name ,and the dialing previliges of all DN's in the list. So i...
View Article11.9 Filtering Traffic with Time-Based Access Lists
The SG I think overcomplicated the solution.time-range A periodic weekdays 9:00 to 18:00ip access-list extended OUTBOUND permit udp any any eq rip permit ip any any time-range Aint f0/0 ip access-group...
View ArticleVPC+ Order of config
Quick tip guys - especially if you have not watched Brian's videos. Order of operations for some of these technologies is VERY explicit. Have just been playing with fabricpath, and could not work out...
View ArticleClik here to view.
Slow Start, Congestion Avoidance, and Global Sychronization
Slow Start Congestion Avoidance Global SychronizationI have come to the conclusion that, it is good to be able to explain the above terms -- if an engineer wants to be able...
View Article13.30 NAT Default Interface
Andy body have a good link on this subject. Not sure exactly what it does and what command enables that to happen.
View Article13.31 Reversible NAT
Hi,In order to get reversible nat to work, to work I had to remove the "match interface Serial0/1" from the route-map. According to the configuration guide, a route-map has to match on an ip...
View ArticleAccessing lab behind ATT Uverse modem
I'm thinking about moving my dsl over to uverse to double my speed. I have a static ip address on my current dsl. As far as I know if I go to xfinity I can't get a static IP address. I currently...
View ArticleLab Prep List
Hi,Passed my R&S Written exam couple of months ago and i'm preparing for the lab, any idea where to start? hands-on, VoD, etc? I'm thinking WB Volume 1, 2, 3 and 4? Thanks
View ArticleLab - Troubleshoot issues at beginning of lab
I had a hard time writing the title but I think my question will yield more clarity.At the beginning of labs, you may see "There area 2 or 3 issues with the initial configuation that need to be...
View ArticleIS-IS for FabricPath
Hi all,Lets say we have two data center locations and one remote location and MPLS VRF configured between the data centers and the remote location. We use IS-IS as the IGP. Now we want to run...
View Article