More speed needed for SPv3 pass!
Hi guys,I failed my SP lab back in April and have my second attempt coming up in a few weeks. I don’t think the technology is a problem as I can complete the workbook and mock labs with no problem. On...
View ArticleSection 5: ICMP Traffic
The first task is asking to configure the firewall so that no one could ping it but allow the firewall to ping anyone.The solution for the outside interface is "icmp permit any echo-reply outside"....
View ArticleDMVPN Daisy-chain NHS servers
Hi all, I need some clarification on dasy-chaining NHS servers in DMVPN, when and why I need to to this.Is it in only phase 2 and only with particular types of design's?For example if I have a two...
View ArticleStephen Wright - CCIE Voice #14998
Hi AllI passed my CCIE Voice lab (14998) on my first attempt in Brussels this week having started my Journey in January 2013 and some 800 hours crammed into a short 5 months! This is my story and a...
View ArticleParts of voice lab for sale
Trying to sell of the last of my old lab. *Cisco 3725 maxed out with NM-HDV-2T1-60, VWIC-2MFT-T1, and VWIC-2MFT-E1 that I was using for my PSTN router. $250 shipped *Cisco 7962 IP Phone. These are in...
View ArticleUnity user creation
Hi when i create a user from the phone dn drop down for unity get error on saving Problem: Status Unmapped Exception (401) Error what could be wrong have check the axl user settings they are ok shabbar
View ArticleVPN CE management, Rainbow and Grey methods
I came across these terms earlier this week in regard to CE management, two methods known as Rainbow and Grey. Does anyone have some detailed information on this, I'd like to read up and find out more...
View ArticleWarning: OSPF E2 Route Selection
I just made an interesting discovery whilst playing with routing metrics on my Lab rack. There's a myth going about that two competing E2 routes for a prefix with be selected by first comapring the...
View ArticleClik here to view.
Static route into OSPF and BGP
I have a very simplified diagram of a section of network where I am currently experiencing issues.We have a 3750 which is peering up our WAN SP router via eBGPIt also talks OSPF to the internal...
View ArticleFRF.12
HIIn case of this questing.HQ link to SB has 400K. Configure FRF.12 with 10MS sampling rate. After cheking ISDN QoS this is my solution to enable FRF.12 (400*10)/8=500bytes (Maximun size of packet...
View ArticleReboot simulated routers on SP lab ?
I read a lot of issues with simulated router in real SP lab : process down, link down, neighbor doesn't want to come up even all config are correct, and crazy behaviour where you could spend a lot of...
View ArticleUsing NetApp Disk Shelves as a JBOD
Anyone knows the procedure to convert a NetApp DS14 into a JBOD using Windows ?I found this article but it only mentions the procedure for...
View ArticleAutomatic reply: Using NetApp Disk Shelves as a JBOD
Jag är på Semester och är åter i tjänst den 7/1 - 2013. I'm on vacation and will be back the 7th of January 2013.
View ArticleISIS NET address format
Hi allI am preparing the routing part of CCIE, and I am actually running (at least trying) the ISIS part.Can somebody recall me the NET adress format.I know that there is an AREA part, a SYSTEM ID and...
View Article11.39 | 11.42 ZFW - difficulty rating...
Hi ALL, Is it just me or are these far to complicated for learning these topic, i appreciate these are great ways to learn but i feel you would never get tasks this complcated in the lab..? Lee
View Article[mpls vpn pe-ce bgp] with ospf as igp
hi,all:i would like to ask for you thoughts on the following scenario.CE1---(ebgp)---PE1---PE2----(ebgp)---CE2I have a backdoor link between CE1/2 and i'm running ospf for loopbacks and backdoor link...
View Article"ipv6 enable" command on the interface
Hello Guys,What is the need of the command "ipv6 enable" on the interface?I've checked the Cisco command reference and found out the following:To enable IPv6 processing on an interface that has not...
View ArticleATT Bit Not Being Set in ISIS
Hello,I've been working through the INE SP workbook, and found that any time there's a task that has one or more devices participate in Level 1 and peer with a L1/L2 device, I never see the ATT bit...
View ArticleTASK 1.1
Why does f1/4 come into the picture in the SG? It wasn't mentioned in the task, and it wasn't pre-configured on SW1.
View Article5k vpc peerlink
hi guys,newbie here,not sure which nexus video i watched where brian mentions the point of not running data traffic over the vpc peerlink.if i have take this out of contact i applogize.is there any...
View Article