EIGRP Section DMVPN down on R5
I am going through the EIGRP section of the new V5 workbook and have got stuck at the first hurdle. All the network statements are on but between R2 and R5 DMVPN is not upR5#sh...
View ArticleUCS emulator connectivity issues
Has anyone successfully installed the USCPE ( emulator) on a MAC, version 10.9.2 ? I've been able to install the image in a virtual machine and configure from the command line, specifying the...
View ArticleLocal Web Authentication Using ACS
I couldn't get this lab working. Has anyone else had luck with it? I used the option 2 config per the lab and it doesn't seem to be working. ACS seems to only get some of the RADIUS authentication...
View ArticleTask 4.13 Never works for m :(
%OSPF-4-NORTRID: OSPF process 100 failed to allocate unique router-id and cannot startI am always getting this message ...what should I do ???????? I copied the config from ine workbook and paste it...
View ArticleLab 4 - Task 4.2 IS-IS PE-CE
Hi,I don't fully agree with the provided solution for task 4.2In task we have R6 which is dual-homed CE to R4 PE and R1 PE. Integrated IS-IS is used for PE-CE protocol. IS-IS is redistributed to...
View ArticleBGP over NAT Config Issues
Hi Expets, I have tried BGP over NAT configuration.But I got some issues.Please advice for the following scenario:1.Connecting 2 routers (R1 and R2) directly connected and form ebgp peer b/w these 2...
View ArticleClik here to view.
ODR - On-Demand Routing & Dynamic Routing
Hi all,I see this statement "For ODR to be functional, there should be no dynamic routing protocol configured on spokes."Is this saying there should be no dynamic protocol over the link where ODR is...
View ArticleComments in Workbooks
Hello all,when I do a comment in the workbook, is it possible to see it anywhere else than in the current section? It would be great to see them in a list like Bookmarks.
View Articleospf lab diagram missing from workbook
Hi,When doing the OSPF lab sections in the Adv Tech Labs, there's a note in each section saying:***Reference the Advanced Technology Labs OSPF Diagram to complete this task.***But I don't see an ospf...
View ArticleDHCP vs ICMP Message Type 9 and 10
Dear Gents, I was reading the ICMP messages and found with the help of ICMP Type 9 and 10 host could automatically discover the identity of local routers, and learn important information about them...
View ArticleEIGRP Filtering with Prefix-list
Hi guys,CCIE R&S v5 Advanced Technology Labs - EIGRP, EIGRP Filtering with Prefix-list - Task 2 says to configure a prefix-list on R1 so that it does not install any updates received from R4 on the...
View ArticleCCNP Lab Workbook initial configuration scripts for the Frame Relay
Hello,I am trying to find the initial configuration scripts for the Cisco 2522 used as a Frame Relay Switch in the CCNP Lab Workbook. I have all of the equipment listed in the hardware requirements...
View ArticleCSR1000v Serial Access ESXi 5.5
Hello guys, Could use some help here setting up the 1000v for serial access. I have a server setup with ESXi5.5 and have deployed the CSR1000v from the OVA.Before booting I go into Vcent and install...
View ArticleCCIE SP .net file for gns3
Has anyone got .net file for gns3 for CCIE SPV3? I need it as I have lost it :(
View ArticleClik here to view.
So... just back from Brussels (R&S v5 Exam)
First and foremost, it did not go well (my overall impression) so I will probably be returningThis was my first CCIE attempt so I cannot compare and contrast between v4 and v5. Also, I have not...
View ArticleASA Identity Firewall
I coudn't get this section working but i believe is a problem with my AD server configuration. However with the current setup and solution I dont see how it would ever work. If the TEST PC cannot reach...
View ArticleSpanning-Tree Timers
Hi,I have a question about spanning-tree timers. See the timers in this output (http://gyazo.com/e11ecd00fd73923e43d96a1d4a6fa255) So the root bridge has advertised timers as:hello = 1max age =...
View ArticleIOS-XR NAT
Hello EverybodyI have requirement to change the IOS NAT statement into IOS-XR one . Could you please suggest what will be IOS-XR equivalent of this IOS statement.I am finding IOS-XR NAT to be little...
View ArticleASA Object-Group Access-Lists
In this lab you create three different service object groups using 2 different methods. I am wondering if there is a difference in the behavior between the two. I am guessing no. The first method seems...
View ArticlevHBA and vNIC verification end to end
Hi,Once we instantiate a service profile (may be before and after boot attempt of the server) what is the logical sequence of verification on hop by hop.for example if the task demanad 2 vHBA and 4...
View Article