task 1.2 command switchport mode dynamic desirable
hi all, i'm trying to do task 1.2but problem with command switchport dynamic desirable not seen in my switch Rack1SW1(config)#interface range ethernet...
View Article6.2 uRPF
so my solution for this question was based on the fact that we're doing VRF and PE to CE routing off the physical interfaces of the connections to the BB routers (bb1 and bb3) Its not like in this LAB...
View ArticleVPLS from an enterprise perspective
This week I have reviewing a design that uses VPLS as WAN technology between edge and core sites providing any to any connectivity.EIGRP had been used as the routing protocol of choice with the stub...
View ArticleTroubleshooting Questions
Hello all,I have went through a few troubleshooting labs from WB4 and have noticed several typo's and solutions that dont actually work. I'm pretty frustrated by this WB and it is by far my least...
View ArticleBlack and White Topology Diagrams
Does anybody know where I can get a soft copy of the black and white topology diagrams that are used in the ATC videos?
View Article1.4 Possible Alternative Solution
Hi all,Still busy with the lab but I like checking sections as I finish them to confirm I am on the right track.My solution for this though similiar appears to be a lot less intensive on configuration,...
View ArticleWhat order to take the CCNP path
Hi all, I just bought the INE CCNP self-study bootcamp I was planning on taking the Route exam first followed by Switch and finally TShoot. What is the best order to take these exams in? I just see...
View ArticleTask 7.4 - Alternate solution?
For some reason whenI was doing this lab, I assumed that they were looking for some other solution.I was testing and it seems that it also meet the requirements, but I would like to receive some...
View ArticleCCDE Bootcamp doubts...
I was very excited to read about the possibility to attend CCDE bootcamp in London the next August...The reason for which I never seriously took in consideration the possibility to try the CCDE...
View ArticleTask 8.2 how to verify it
How I could verify WRED when apply it on inteface rather than MQC?
View Article2.10 BGP aggregate to BB
I am surprised to see that the SG does not filter the more specific networks of the aggregate towards the BB. I thought the question implied that the BB should receive only the aggregate and not the...
View ArticleTask 2.10
I created the aggregate as a /17 network. I checked all the router and the highest subnet is 129.x.124.0/24. Why does the SG aggregate to a /16? Am I missing something?
View ArticlePVDM and Network Module
Hi all, In my lab i have routers , 2811, with NM-HDV and PVDM , let's say, BR1 and HQ, and BR2 with on board PVDM2.I bought 2 PVDM2-16 modules in order to implemente correctly RSVP and other stuff.My...
View ArticleCCIE SEC v4 workbook
Hellonoticed new CCIE Sec V4 technology labs available on member page - great resource.Would like to know when is ETA for v4 workbook?Thanks
View ArticleTokens for sale
Members, After speaking with a few others, I have decided to drop the price on the rack rental tokens to $1000 for 2000 tokens. Send message if interested and we can arrange a transfer Thanks JT
View ArticleOSPF Interface Timers
hiI am doing that workbook vol1Configure R5 to send OSPF hello packets out its link to the Frame Relaynetwork every five seconds, and wait for seven seconds before declaringa neighbor down.we know that...
View Articleospf over non-broadcast media - routes in ospf database, but not in routing...
Guys. I'm working on ospf over non-broadcast media lab of workbook 1. below is output of R5. routes are there in ospf database, but not in routing table. do you know why? how to resove it? Rack1R5#sh...
View ArticleOSPF NSSA LSA Type 7 to 5 Translator Election
In my lab, when there are 2 or more OSPF NSSA LSA Type 7 to 5 Translators, the one with higher OSPF router-id would be always prefered to be the translator. Is it possible to control this type of...
View Articlebind/unbind a service profile to a template
Hi all, I know that we could bind and unbind a service profile to a template whenever we want, however, what if the policy/policys of that service profile is different with the policy/policys of the...
View Article