L2 VPN's vs L3VPN's
I'm trying to understand what kind of L2 VPN's and L3 VPN's there are, and what there advantages are over the other I'm hearing and seeing a lot of variants on the internet and I'm trying to keep them...
View Article11.18 CBAC TCP/UDP Intercept Feature
Hi community, I did read a couple of threads for this task but they did not quite cover my questions so I am creating a new one here.OUTSIDE---------Router----------INSIDETo my understanding, after...
View ArticleCCDE self-paced video material ?
Does INE has a plan to release CCDE self-paced video material ?
View ArticleWorkbook IV and Dynamips
Gents,From the various feedback on this forum and others, it appears that the troubleshooting portion of the R/S lab is actually just IOS running on IOU or some derivative of Dynamips. This makes sense...
View ArticleAutomatic reply: Workbook IV and Dynamips
I will be out of the office the week of April 14th, returning April 21st, with limited to no access to email. If you need immediate assistance please contact Cliff Wilberding (601.297.6642 or...
View ArticleDo I need another break-out switch?
With my current home lab setup, using a break-out 3750-48, I've run out of usable ports. The 3750 does double duty; home/internet switch and a lab switch.I can build all but the CsC labs with a 1:1...
View ArticleHow to prepare for ccna exam
Although i know that there is no shortcuts for this exam but do you guys recommend to buy cisco routers at home to practice? Do i have to read the ccna book that i bought from sybex page by page? I...
View ArticleWill IS-IS and multicast be soon obsolete ?
Will IS-IS and multicast be soon obsolete ??? as I am learning these technologies and want to know that these technologies will be used for sometime .
View ArticleConfig Guide for Layer-2 Switching
So in the lab exam, config guide is available right? i'm wondering if the layer-2 switching section is available? i'm not sure but looking at this link (for example), im not seeing such as PVST, VTP,...
View ArticleTask 10.50 - Using MQC CBWFQ with Legacy FRTS
Can someone explain how did we get Bc of 25600 ??? Tc is 10ms .... i came up with Bc of 5120 based on Bc=CIR * Tc/1000 .... map-class frame-relay LEGACY_FRTS frame-relay cir 512000 frame-relay bc 25600...
View ArticleQuestions about workbooks and racks
Hi , I have the following few questions which i hope you answer: 1- I saw that the workbook for v4 seems to be available at http://www.ine.com/self-paced/ccie-security/workbooks.htm , can you confirm...
View Articlelots of errors in the qos tasks
Just a heads up for anyone diving into this section. I'm focusing on the learning and trying not to let the errors be a distraction. Hey, keeps ya on your toes, copy and paste will not get you very far...
View Article7.14 - Aggregate Address
Hi All, I just wanted to double check something on this question. I was testing what happens when you don't have the aggregate routes configured. I notice that when I don't have the aggregates...
View ArticleCisco router suggestion for BT Infinity
Hi All,Bit off topic, but I want to run a Cisco router for my BT infinity (80Mbit down & 20Mbit up over VDSL). I want a cheap proper Cisco router (not some 800 series rubbish) with the troughput...
View ArticleAutomatic reply: Cisco router suggestion for BT Infinity
Dear sender, I am out of office untill 18/04 , for queries related to Tunisiana account you can contact Zied sassi (29535331) or Jrad mohamed ( 24699094) , for queries related to Orange account...
View Article14.4 MP-BGP VPNv4
Hi allI have two questions.FirstI an wondeing why the 192.168.7.0/24 route is not in R5's routing table.on R6 , I redistribure static route like below address-family ipv4 vrf VPN_A redistribute...
View ArticleWhat does this statement even mean?
using the CAM table, verify that all layer 2 traffic between devices in the same VLAN, but not attached to the same switch, is transiting SW1.Lab 1.2
View Article2.1 Is this lab's initial config triggering a bug?
As I get to Task 2.1 I find out R1's FR interface is up/down even though allseems to be correctly configured:R1R1(config)#do sh run int s0/1/0 (I am not showing the subinterface but it has the initial...
View ArticleCan any one Advise
Hello All,I want to know if any one have done or can adivse that can i use my existing CCIE R&S LAB equipment in the SP as well.I know i do not have XR but i can simulate XR over GNS and connect it...
View ArticleNexus Admin account and Jumbo Frame setup
Hi Guys, For some reasons we have lost the local admin password to our nexus platform, but can login using a TACACS account. Is that a way to reset the Admin password on the Nexus platform without...
View Article