BGP traffic Passing via cisco ASA
R1 (2.2.2.2)------------ASA-------------R2(1.1.1.1) (INSIDE) (Outside)R1 and R2 are correctly configured for ebgp.On ASA :- Please correct by understanding1)If...
View ArticleOSPFv3 - Prefix and Router LSA Question
Good evening all, While doing some basic OSPFv3 labs I noticed that only the DR for a broadcast segment will generate the prefix LSA for that network segment. Can anyone explain why this behavior...
View Article6.2 Reflexive acls
The SG's solution for 6.2 indicates that ALL hosts behind R2 need protected. The wording indicates that we need to protect VLAN 27 and NOTHING ELSE. Should we need to protect host on SW4 then the...
View Articleframe-relay traffic-shapping command - when to use it
frame-relay traffic-shapping command - when to use it? what does it do?
View ArticleCalling Party Transformation Pattern problem.
Hi all,I've got a situation with a Calling Party Transformation Pattern that I don't understand. I have a SIP trunk from my provider (Provided by or ISP on our MPLS network). When someone in our...
View ArticleCisco stops CCDE ???
One thing is striking my mind again n again and it is that " with softwares available and u just give input like for e.g if I have 2000 users and they sit in office in 7 floors it would be very easy...
View ArticleIOS Authentication Proxy Local AAA task
Dears,I am using ios authentication proxy using local router database and did the same config of the solution on the router. I am using Cisco2821 with the ios...
View ArticleCisco IOS images for Gns3
Is it possible to get all ios images necessary for CCIE Security practice in Gns3??That are ios 15.1 t2 15.2 t3 Regards, Sharat
View ArticleCat QoS
I was reading the following below about SRR and have a question about buffers. The way I read this is the SRR services the priority input queue at 10% with priority after that all frames are services...
View ArticleCA Server Problems
Dear Cristian,Please note that i am using my own lab and i am facing some issues with my Windoes server 2008:I cannot always see the same options that you have in the sceenshots in technologies...
View ArticleWorkbook Physical layout and parts list
Hey,IF I choose to build my own lab based on the workbooks, what parts list do I need and how is the gear physically cabled? I built my own R/S rack and I am toying with building a partial DC lab as...
View ArticleNext track dilemma
Hi guys,I am looking to go after my 3rd CCIE after completing R&S and SP over the last few years.So my dilemma is.... which track next?!My view on the tracks is...R&S - This is the 'base' CCIE....
View ArticleRe: NPV on 5K
Re-built it and everything looks good now. The crash/reload is a little disturbing though. I'll try to make it a point to remember to save my config before doing anything FCOE related on a 5K in the...
View ArticlevPC+ and Peer-switch
I read one of the book and it says do not use Peer-switch feature in a vPC+ environment. It doesn't say why. Does anyone have any idea?
View ArticleMulticast over Inter-AS MPLS
Hi, I am working on a project that requires multicast over Inter-AS MPLS. I would greatly appreciate if any could cast their eye over the following and confirm if I am on the right track: Overview:*...
View ArticleINE woorkbook
INE, We are hope for your announce the new workbook of CCIE RS v5, VoD and all stuff for this year right? Regards
View ArticleBOOT from SAN then iSCSI--
Hi, In INE rack rentals , i never did Boot from iSCSI , but boot from SAN would be easy :) But i am not sure weather they have Disk where OS is preinstalled such as ESXi as i hardly get rack that to be...
View ArticleVer 4 Full scale labs
When can we realistically expect the ver 4 full scale labs? End of February was the estimate and then 2 weeks or mid march. Thanks
View Article14.6 PE-CE Routing with RIP
Hello all. I'm new to MPLS and am having trouble understanding the solution to this task. I'm hoping that the members here can help explain this to me. Here is what I am having a problem...
View ArticleOspf frame-realy network
one of my friend asked this question toady. if the subinterface configed with point-to-multipoint(hub) and encapsulation config without broadcast cmd. now DR\BDR election will happen ? and it need...
View Article