Task 2.2 Redistribution. Alternate solution
So I accomplished the redistribution task in a slightly different way. My reasoning for this is that increasing the OSPF External AD above 170 when doing mutual redistribution with EIGRP, doesn't...
View ArticlePassed CCIE SP Lab. Now Dual CCIE#35565
Hello IEOC, I have passed the CCIE SP Lab yesterday at Brussels. The results came in pretty fast aroung 10 PM. I will share my experience here. I will only share thinggs pertinating to the SP lab....
View ArticleCCDE Bootcamp doubts...
I was very excited to read about the possibility to attend CCDE bootcamp in London the next August...The reason for which I never seriously took in consideration the possibility to try the CCDE...
View Article"when the link is down..."
I've run across lots of scenarios while studying which contain statements such as "ensure full connectivity is maintained in the event the link between SW1 and R6 is down." Sometimes it's easy to see...
View Articleautorp pim listener
Can anyone explain in detail how using auto rp listener propogates the mapping agent and RP through a sparse mode multicast domain? I understand that using sparse-dense allows 224.0.1.40 and .39 to be...
View Article1.42 - Command not showing up
Hi All,My question is regarding 1.42's final task - Configure port Fa0/6 with an access VLAN assignment of 146, and for voice VLAN frames to use dot1p tagging.I put the dot1p command in, but it doesn't...
View ArticleCisco Catalyst 2960X Ethernet Switch
"I want to buy Catalyst 2960-X series switches like WS-C2960X-24PS-L,WS-C2960X-24PD-L, buy I'm not very well know about c2960x series. Can someone help me ?"--from yahoo answer.All Catalyst 2960-X...
View Articleconfusion about burst rate in policing
can someone simplify for me the value to use for burst when doing rate limiting, say for example .. im doing 1mb limit on below traffic class on a 3560 switchPolicy-map RATE-LIMITclass MYCLASSpolice...
View ArticleDifference between "TS Scheduler" and "TS gradeLAB"
Hello Witch it's the Difference between "TS Scheduler" and "TS gradeLAB" the both cost 10 token peer hourIn the graded I see tree LAB (Topology 1-> 3) and in the other I see several?? Where are the...
View ArticleBGP+Label Vs MPLS LDP label
Hi alli have a question that is related to INE Full Scale Lab 4, i have noticed that enabling the Inter-AS MPLS VPN will not work unless i make the LSP over the IGP not over BGP+Label, that is why i...
View ArticleEquating tokens to time
I think I may be missing something here about how you equate tokens to time!!!Does the consumption of tokens have different rates at different times of the day/week or dependant on the labs you are...
View Articlemulticast, frame-relay
do we have to apply "ip pim nbma-mode" only on hub or do we have to apply it on spoke as well?
View ArticleAuto-RP
Hi R&S experts,While reviewing auto-rp to day I came up with a though of how to select an RP with a lower IP address if you had 2 RP's reaching the mapping agent.After doing some research I was...
View ArticleRadius/Tacacs Attributes in ACS LAB ACCESS
Dears,Does anyone know if we have to memorize Radius/Tacacs Attributes that are assigned in ACS to radius/tacacs requests?Is there any good location that we can rely on in the lab?Thank you Guys.Moustafa
View ArticleMulticast-Task VOL-2-LAB-9-TASK-5.1
On Vol2 Lab 9 there is a Multicast Task 5.1 with the requirements:Windows media server located on VLAN 3 is streaming a multicast video feed into your network. You have received complaints from users...
View ArticleOTV with Jumbo MTU
Hi, I'm trying to test jumbo mtu over OTV, but I do not seem to be able to adjust the mtu in the system policy (I need 9216 on my F-card to my N5K which I have SVI's on).This is what I get when I try...
View ArticleVolume 1 Multicast 8.2 code/hardware problem, v4 to v5 now what?
BACKGROUND: I have my own rack with mixed hardware and it seemed logical to upgrade my code to resemble the CCIE v5 spec with 15.0 and 15.3T. However not all my gear can support the upgrade so I went...
View ArticleAutocommand access-enable host
What is the difference in appply the command: username RDP autocommand access-enable host line vty 0 4 autocommand access-enable host Thanks
View Articlerunning 30 routers in gns3 ubuntu
Hi. how to run 30 routers in gns3 ubuntu? my pc hangs up once i reach 15 routers.
View Article7.35 Task: Aggregation-Advertise Map not working
Dears, Again can not detect where is the mistake in config .I can not see the Aggregate route/22 Result as per SG.----------------Partial Output-----------------Rack1R6#sh IP BGPBGP table version is...
View Article