OSPF Interface - Frame-relay fragment
Hey guys, I have two queries to ask you...1 - Should I change the ospf network type always or just when I have to change to make the neighboring work ? My doubts is, if I have a point-to-point...
View Articlefcoe-npv mode
Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0;...
View ArticleR&S WB-1 lab, BGP Communities
page 188 of 281. Note : Load the Basic BGP routing intial configurations prior to continuing.I verified the initial config, i'm not seeing AS-60 in the topology. Am i missing something? thanks
View ArticleLab 4-TS, Ticket 8: Does the solutions guide virtual-link suggestion really...
R5 lo100 (3001:5::5/128) is in area 2.R3 should choose optimum direct path to R5s Lo100R3 also has two tunnel interfaces in area 2 (to R2 and R4).This way the IPv6 prefix of R5 Lo100 is always learned...
View Articlevol 1 , 1.1 Router on a stick configuration
Hello,I configured R6 with sub interfaces for 155.22.67.6 (encap dot1q 67) and added Vlan 67 to SW1 database and created int Vlan 67 (155.22.67.7) on SW1. Also made the link between R6 and SW2 as trunk...
View ArticleClik here to view.
INE R&S topology working on GNS3 using breakout switch !!
Since I'm a member of INE and have benefited from reading all the forums, I figured it was time for me to share with the community the work I've done in creating a working GNS3 INE R&S working...
View ArticleGNS3 on Ubuntu and Vol. 1 BGP
Hello all,I have had great success running all of the topologies so far for Vol 1. using an Ubuntu VM with 6GB RAM allocated. No problems at all.However, I loaded the BGP .net file (Initial BGP) and...
View ArticleSerial Links in CCIE R&S v5 topology
Hi all,I was going through the presentation slides for the CCIE v5 Cisco Live Milan session. I saw many serial links in the example topologies. I am just thinking if they still Love serial links in the...
View ArticleI passed the CCNP!
I took and passed the Tshoot exam this morning! I am finally a CCNP. Man what a journey. I feel like I just finished a marathon and I am only part way done, I still have to take and pass the CCIE...
View ArticleDynagen/GNS3 - Bash script - Auto Config Maker
INE Community,I have been working on a simple (400+ line code) script that will parse a .net file and automatically build configuration files with IP addresses, hostname, and anything else I can...
View ArticleCCIE RS Version 5 on Cisco Live in Milan, Italy
GuysIt's official now, Cisco going to explain the new version 5 on Cisco Live in Milan, Italy . Presenter is Bruno van de Werve, Exam Product...
View ArticleNeed help to load correct config to start Section 3: IP routing
Hello,I wanted to try section 3 tasks and hence asked the iebc.rs.v1.1-section2.final configuration to be loaded.Is this correct? I am trying to execute task 3.1 but I dont see 155.19.146.4 configured...
View ArticleEtherChannel over 802.1q Tunneling from Vol I
Dear All, I will really appreciate if any of you can give me solution of my problem which i am facing while doing the lab 1.17 EtherChannel over 802.1q Tunneling from Vol I.I am exactly following the...
View Article13.45 Netflow Top Talkers -- "match only tcp and icmp"?
Reviewing IP Services section (WB-I). I do not see any other threads on this, so I am doubting myself. Is there a trick to this bullet-point, or error in workbook?Match only TCP and ICMP flows...
View ArticleClik here to view.
bgp maximum-paths for MPLS WAN/load balancing
I saw the BGP Video for load balancing which showed 2 unequal links connected with 3 routers all running bgp. The top single router R1 had the command maximum-paths 2 added to it along with...
View Article3.2 Multicast Basics Issue
A task needs to be added to create an ipv6 address for R6's vlan 46 interface to be 2001:CC1E:X:404::/64 eui-64. I was unable to get R5 to successfully ping FF06::6 without this.After looking at the...
View ArticleNexus 5020 jumbo mtu configuration
what is the use for the global config 'system jumbomtu' command in the Nexus 5020? the network-qos system policy needs to be modified for the system in order to enable jumbo frames, so whats the use...
View ArticleClik here to view.
IPv6 multicast - PIM not using unicast routing table? (RPF failures)
Hello all... i'm studying with particular interest IPv6. In particular my focus is on IPv6 multicast.My topology, matches the diagram below. I have a full dual stack hub and spoke topology where hub...
View ArticleCisco 7940 not registering
Hi, I have a weird problem on cisco 7940 that is not registering to outside world. My setup is as below:1. Elastix server on private IP.2. All cisco phones connect with elastix server and gets...
View Article