Anyone else have any trouble getting this lab functional? My redudancy between R1 and R2 seem to keep flapping from standby to init. I thought maybe it was my config so wiped both routers and started over pasting in the configs online and got the same problem. R1 seems to do just fine always stays active
%RG_PROTOCOL-5-ROLECHANGE: RG id 1 role change from Init to Standby
R2# %RG_PROTOCOL-5-ROLECHANGE: RG id 1 role change from Standby to Init
R2# %RG_PROTOCOL-5-ROLECHANGE: RG id 1 role change from Init to Standby
R2# %RG_TRANSPORT-3-TRANSFAIL: Negotiation failure with error code: 2
R2# %RG_PROTOCOL-5-ROLECHANGE: RG id 1 role change from Standby to Init
I ran some debug on R2, didn't really provide me much anything more.
RG-PRTCL-MEDIA: RG Media event, rg_id=1, role=Active, addr=136.1.1.1, present=exist, reload=0, intf=Gi0/1, priority=150.
RG-PRTCL-MEDIA: [RG 1] [Init/Standby-test] set peer_status 0.
RG-PRTCL-MEDIA: [RG 1] [Init/Standby-test] priority_event 'media: high priority from active', role_event 'no event'.
RG-PRTCL-EVENT: [RG 1] [Init/Standby-test] select fsm event, priority_event=media: high priority from active, role_event=no event.
RG-PRTCL-EVENT: [RG 1] [Init/Standby-test] process FSM event 'media: high
R2#priority from active'.
RG-PRTCL-EVENT: [RG 1] [Init/Standby-test] no FSM transition
RG-PRTCL-MEDIA: RG Media event, rg_id=1, role=Standby, addr=0.0.0.0, present=not-respond, reload=0, intf=Gi0/1, priority=0.
RG-PRTCL-PEER: [RG 1] [Init/Standby-test] delete peer, peer_role=Standby, peer_status=not-respond.
RG-PRTCL-PEER: [RG 1] [Init/Standby-test] Standby peer deleted, no status update.
RG-PRTCL-MEDIA: [RG 1] [Init/Standby-test] priority_event 'no event', role_event 'media: standby not present'.
RG-
R2#PRTCL-EVENT: [RG 1] [Init/Standby-test] select fsm event, priority_event=no event, role_event=media: standby not present.
RG-PRTCL-EVENT: [RG 1] [Init/Standby-test] process FSM event 'media: standby not present'.
RG-PRTCL-EVENT: [RG 1] [Init/Standby-cold] FSM event media: standby not present, FSM transition Standby-test->Standby-cold.
RG-PRTCL-EVENT: [RG 1] [Init/Standby-cold] role change go-to-Standby
RG-PRTCL-PEER: [RG 1] [Init/Standby-cold] set Standby peer local.
RG-PRTCL-EVENT: [RG 1] [Init/Stan
R2#dby-cold] notify RG Media of role go-to-Standby.
RG-PRTCL-EVENT: [RG 1] [Init/Standby-cold] notify RG VP of role change Init->Standby.
%RG_PROTOCOL-5-ROLECHANGE: RG id 1 role change from Init to Standby
RG-PRTCL-EVENT: [RG 1] [Init/Standby-cold] notify RG VP of peer present.
RG-PRTCL-EVENT: get rg peer, rg_id=1, peer_role=Active.
RG-PRTCL-EVENT: [RG 1] [Init/Standby-cold] get rg peer, peer address 136.1.1.1, peer intf Gi0/1.
RG-PRTCL-EVENT: [RG 1] [Init/Standby-cold] set rg role Standby.
%RG_TRANSPO
R2#RT-3-TRANSFAIL: Negotiation failure with error code: 2
RG-PRTCL-MEDIA: RG Media event, rg_id=1, role=Active, addr=136.1.1.1, present=exist, reload=0, intf=Gi0/1, priority=150.
RG-PRTCL-MEDIA: [RG 1] [Standby/Standby-cold] set peer_status 0.
RG-PRTCL-MEDIA: [RG 1] [Standby/Standby-cold] priority_event 'media: high priority from active', role_event 'no event'.
RG-PRTCL-EVENT: [RG 1] [Standby/Standby-cold] select fsm event, priority_event=media: high priority from active, role_event=no event.
RG-PRTCL-E
R2#VENT: [RG 1] [Standby/Standby-cold] process FSM event 'media: high priority from active'.
RG-PRTCL-EVENT: [RG 1] [Standby/Standby-cold] no FSM transition
R2#
RG-PRTCL-MEDIA: RG Media event, rg_id=1, role=Active, addr=136.1.1.1, present=exist, reload=0, intf=Gi0/1, priority=150.
RG-PRTCL-MEDIA: [RG 1] [Standby/Standby-cold] set peer_status 0.
RG-PRTCL-MEDIA: [RG 1] [Standby/Standby-cold] priority_event 'media: high priority from active', role_event 'no event'.
RG-PRTCL-EVENT: [RG 1] [Standby/Standby-cold] select fsm event, priority_event=media: high priority from active, role_event=no event.
RG-PRTCL-EVENT: [RG 1] [Standby/Standby-cold] process FSM event '
R2#media: high priority from active'.
RG-PRTCL-EVENT: [RG 1] [Standby/Standby-cold] no FSM transition
R2#
RG-PRTCL-MEDIA: RG Media event, rg_id=1, role=Active, addr=136.1.1.1, present=exist, reload=0, intf=Gi0/1, priority=150.
RG-PRTCL-MEDIA: [RG 1] [Standby/Standby-cold] set peer_status 0.
RG-PRTCL-MEDIA: [RG 1] [Standby/Standby-cold] priority_event 'media: high priority from active', role_event 'no event'.
RG-PRTCL-EVENT: [RG 1] [Standby/Standby-cold] select fsm event, priority_event=media: high priority from active, role_event=no event.
RG-PRTCL-EVENT: [RG 1] [Standby/Standby-cold] process FSM event '
R2#media: high priority from active'.
RG-PRTCL-EVENT: [RG 1] [Standby/Standby-cold] no FSM transition
R2#
RG-PRTCL-MEDIA: RG Media event, rg_id=1, role=Active, addr=136.1.1.1, present=exist, reload=0, intf=Gi0/1, priority=150.
RG-PRTCL-MEDIA: [RG 1] [Standby/Standby-cold] set peer_status 0.
RG-PRTCL-MEDIA: [RG 1] [Standby/Standby-cold] priority_event 'media: high priority from active', role_event 'no event'.
RG-PRTCL-EVENT: [RG 1] [Standby/Standby-cold] select fsm event, priority_event=media: high priority from active, role_event=no event.
RG-PRTCL-EVENT: [RG 1] [Standby/Standby-cold] process FSM event '
R2#media: high priority from active'.
RG-PRTCL-EVENT: [RG 1] [Standby/Standby-cold] no FSM transition
R2#
RG-PRTCL-MEDIA: RG Media event, rg_id=1, role=Active, addr=136.1.1.1, present=exist, reload=0, intf=Gi0/1, priority=150.
RG-PRTCL-MEDIA: [RG 1] [Standby/Standby-cold] set peer_status 0.
RG-PRTCL-MEDIA: [RG 1] [Standby/Standby-cold] priority_event 'media: high priority from active', role_event 'no event'.
RG-PRTCL-EVENT: [RG 1] [Standby/Standby-cold] select fsm event, priority_event=media: high priority from active, role_event=no event.
RG-PRTCL-EVENT: [RG 1] [Standby/Standby-cold] process FSM event '
R2#media: high priority from active'.
RG-PRTCL-EVENT: [RG 1] [Standby/Standby-cold] no FSM transition
R2#
RG-PRTCL-MEDIA: RG Media event, rg_id=1, role=Active, addr=136.1.1.1, present=exist, reload=0, intf=Gi0/1, priority=150.
RG-PRTCL-MEDIA: [RG 1] [Standby/Standby-cold] set peer_status 0.
RG-PRTCL-MEDIA: [RG 1] [Standby/Standby-cold] priority_event 'media: high priority from active', role_event 'no event'.
RG-PRTCL-EVENT: [RG 1] [Standby/Standby-cold] select fsm event, priority_event=media: high priority from active, role_event=no event.
RG-PRTCL-EVENT: [RG 1] [Standby/Standby-cold] process FSM event '
R2#media: high priority from active'.
RG-PRTCL-EVENT: [RG 1] [Standby/Standby-cold] no FSM transition
R2#
RG-PRTCL-MEDIA: RG Media event, rg_id=1, role=Active, addr=136.1.1.1, present=exist, reload=0, intf=Gi0/1, priority=150.
RG-PRTCL-MEDIA: [RG 1] [Standby/Standby-cold] set peer_status 0.
RG-PRTCL-MEDIA: [RG 1] [Standby/Standby-cold] priority_event 'media: high priority from active', role_event 'no event'.
RG-PRTCL-EVENT: [RG 1] [Standby/Standby-cold] select fsm event, priority_event=media: high priority from active, role_event=no event.
RG-PRTCL-EVENT: [RG 1] [Standby/Standby-cold] process FSM event '
R2#media: high priority from active'.
RG-PRTCL-EVENT: [RG 1] [Standby/Standby-cold] no FSM transition
RG-PRTCL-MEDIA: RG Media event, rg_id=1, role=Active, addr=136.1.1.1, present=exist, reload=4, intf=Gi0/1, priority=150.
RG-PRTCL-MEDIA: [RG 1] [Standby/Standby-cold] set peer_status 0.
RG-PRTCL-MEDIA: [RG 1] [Standby/Standby-cold] priority_event 'media: high priority from active', role_event 'rg go-to-init'.
RG-PRTCL-EVENT: [RG 1] [Standby/Standby-cold] select fsm event, priority_event=media: high prior
R2#ity from active, role_event=rg go-to-init.
RG-PRTCL-EVENT: [RG 1] [Standby/Standby-cold] process FSM event 'rg go-to-init'.
RG-PRTCL-EVENT: [RG 1] [Standby/Init] FSM event rg go-to-init, FSM transition Standby-cold->Init.
RG-PRTCL-EVENT: [RG 1] [Standby/Init] role change go-to-Init
RG-PRTCL-PEER: [RG 1] [Standby/Init] delete peer, peer_role=Standby, peer_status=no-info.
RG-PRTCL-PEER: [RG 1] [Standby/Init] Standby peer deleted, update status no-info.
RG-PRTCL-EVENT: [RG 1] [Standby/Init] notify RG
R2#Media of role go-to-Init.
RG-PRTCL-EVENT: [RG 1] [Standby/Init] notify RG VP of peer not-present.
RG-PRTCL-EVENT: [RG 1] [Standby/Init] notify RG VP of role change Standby->Init.
%RG_PROTOCOL-5-ROLECHANGE: RG id 1 role change from Standby to Init
RG-PRTCL-EVENT: [RG 1] [Standby/Init] set rg role Init.
R2#
RG-PRTCL-MEDIA: RG Media event, rg_id=1, role=Active, addr=136.1.1.1, present=exist, reload=0, intf=Gi0/1, priority=150.
RG-PRTCL-MEDIA: [RG 1] [Init/Init] set peer_status 0.
RG-PRTCL-MEDIA: [RG 1] [Init/Init] priority_event 'media: high priority from active', role_event 'no event'.
RG-PRTCL-EVENT: [RG 1] [Init/Init] select fsm event, priority_event=media: high priority from active, role_event=no event.
RG-PRTCL-EVENT: [RG 1] [Init/Init] process FSM event 'media: high priority from active'.
RG-PRTCL
R2#u n-EVENT: [RG 1] [Init/Init] no FSM transition
R2#u al
RG-PRTCL-MEDIA: RG Media event, rg_id=1, role=Active, addr=136.1.1.1, present=exist, reload=0, intf=Gi0/1, priority=150.
RG-PRTCL-MEDIA: [RG 1] [Init/Init] set peer_status 0.
RG-PRTCL-MEDIA: [RG 1] [Init/Init] priority_event 'media: high priority from active', role_event 'no event'.
RG-PRTCL-EVENT: [RG 1] [Init/Init] select fsm event, priority_event=media: high priority from active, role_event=no event.
RG-PRTCL-EVENT: [RG 1] [Init/Init] process FSM event 'media: high priority from active'.
Also on R1.
RG-PRTCL-MEDIA: RG Media event, rg_id=1, role=Standby, addr=136.1.1.2, present=exist, reload=0, intf=Gi0/1, priority=100.
RG-PRTCL-MEDIA: [RG 1] [Active/Active] set peer_status 0.
RG-PRTCL-MEDIA: [RG 1] [Active/Active] priority_event 'media: low priority from standby', role_event 'no event'.
RG-PRTCL-EVENT: [RG 1] [Active/Active] select fsm event, priority_event=media: low priority from standby, role_event=no event.
RG-PRTCL-EVENT: [RG 1] [Active/Active] process FSM event 'media: low priority from st
R1#andby'.
RG-PRTCL-EVENT: [RG 1] [Active/Active] no FSM transition
R1#
RG-PRTCL-MEDIA: RG Media event, rg_id=1, role=Standby, addr=136.1.1.2, present=exist, reload=0, intf=Gi0/1, priority=100.
RG-PRTCL-MEDIA: [RG 1] [Active/Active] set peer_status 0.
RG-PRTCL-MEDIA: [RG 1] [Active/Active] priority_event 'media: low priority from standby', role_event 'no event'.
RG-PRTCL-EVENT: [RG 1] [Active/Active] select fsm event, priority_event=media: low priority from standby, role_event=no event.
RG-PRTCL-EVENT: [RG 1] [Active/Active] process FSM event 'media: low priority from st
R1#andby'.
RG-PRTCL-EVENT: [RG 1] [Active/Active] no FSM transition
RG-PRTCL-EVENT: rg reload, rg_id=1, self=0.
RG-PRTCL-EVENT: [RG 1] [Active/Active] notify RG Media of tx reload-peer.
RG-PRTCL-MEDIA: RG Media event, rg_id=1, role=Init, addr=136.1.1.2, present=exist, reload=0, intf=Gi0/1, priority=100.
RG-PRTCL-MEDIA: [RG 1] [Active/Active] media init peer is my standby peer.
RG-PRTCL-PEER: [RG 1] [Active/Active] delete peer, peer_role=Standby, peer_status=resigned.
RG-PRTCL-PEER: [RG 1] [Active/Act
R1#ive] notify RG Media of deleting Standby peer, addr 136.1.1.2, idb Gi0/1.
RG-PRTCL-EVENT: [RG 1] [Active/Active] notify RG VP of peer not-present.
RG-PRTCL-PEER: [RG 1] [Active/Active] Standby peer deleted, update status resigned.
RG-PRTCL-MEDIA: [RG 1] [Active/Active] set peer_status 4.
RG-PRTCL-MEDIA: [RG 1] [Active/Active] priority_event 'no event', role_event 'media: standby resigned'.
RG-PRTCL-EVENT: [RG 1] [Active/Active] select fsm event, priority_event=no event, role_event=media: standby resi
R1#gned.
RG-PRTCL-EVENT: [RG 1] [Active/Active] process FSM event 'media: standby resigned'.
RG-PRTCL-EVENT: [RG 1] [Active/Active] no FSM transition
R1#
RG-PRTCL-MEDIA: RG Media event, rg_id=1, role=Init, addr=136.1.1.2, present=exist, reload=0, intf=Gi0/1, priority=100.
RG-PRTCL-MEDIA: [RG 1] [Active/Active] set peer_status 0.
RG-PRTCL-MEDIA: [RG 1] [Active/Active] priority_event 'no event', role_event 'no event'.
RG-PRTCL-EVENT: [RG 1] [Active/Active] select fsm event, priority_event=no event, role_event=no event.
R1#un
RG-PRTCL-MEDIA: RG Media event, rg_id=1, role=Init, addr=136.1.1.2, present=exist, reload=0, intf=Gi0/1, priority=100.
RG-PRTCL-MEDIA: [RG 1] [Active/Active] set peer_status 0.
RG-PRTCL-MEDIA: [RG 1] [Active/Active] priority_event 'no event', role_event 'no event'.
RG-PRTCL-EVENT: [RG 1] [Active/Active] select fsm event, priority_event=no event, role_event=no event.
R1#un all
All possible debugging has been turned off
R1#
RG-PRTCL-MEDIA: RG Media event, rg_id=1, role=Standby, addr=0.0.0.0, present=not-respond, reload=0, intf=Gi0/1, priority=0.
RG-PRTCL-PEER: [RG 1] [Active/Active] delete peer, peer_role=Standby, peer_status=not-respond.
RG-PRTCL-PEER: [RG 1] [Active/Active] Standby peer deleted, no status update.
RG-PRTCL-MEDIA: [RG 1] [Active/Active] priority_event 'no event', role_event 'media: standby not present'.
RG-PRTCL-EVENT: [RG 1] [Active/Active] select fsm event, priority_event=no event, role_event=media:
R1# standby not present.
RG-PRTCL-EVENT: [RG 1] [Active/Active] process FSM event 'media: standby not present'.
RG-PRTCL-EVENT: [RG 1] [Active/Active] no FSM transition