3.2 IPv6 Multicast Basics
- Configure R6 to join the multicast group FF06::6 on its connection to R4.
- Configure R4 to accept MLD messages only for the group range FF06::/16.
- Use R5 as the PIM RP and ensure that multicast packets from R5 can reach R6.
- Do not configure the RP address statically, and do not configure the same router as a BSR and RP
Rack20R4#sh run | inc multicast-routing
ipv6 multicast-routing
Rack20R4#
I can't create IPv6 ACL in R4. Any idea?
Rack20R4(config)#ipv6 access-list ?
log-update Control access list log updates
Rack20R4(config)#do sh ver | inc IOS
Cisco IOS Software, 1841 Software (C1841-ADVENTERPRISEK9-M), Version 12.4(24)T, RELEASE SOFTWARE (fc1)
Rack20R4(config)#