Quantcast
Channel: IEOC - INE's Online Community
Viewing all articles
Browse latest Browse all 10744

Multicast: Auto RP not Working

$
0
0

Hello community,

For some reason I can't get SW2 to hear advertisements from the mapping agent (R1) or learn RP info. I also configured it to be a candidate RP and the maping agent is not getting its advertisements. Can anyone help me determine what the issue might be please? Below is all output for these thrree devices plus topology (to view full image right click and select "view image):

 

 

R1#terminal leng 0
R1#show run
Building configuration...


Current configuration : 1942 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R1
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
dot11 syslog
ip cef
!
!
!
!
no ip domain lookup
ip multicast-routing
!
multilink bundle-name authenticated
!
!
voice-card 0
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
archive
 log config
  hidekeys
!
!
!
!
!
!
!
!
interface Loopback0
 ip address 150.1.1.1 255.255.255.0
 ip pim sparse-mode
 ip ospf network point-to-point
!
interface Tunnel31
 ip unnumbered Loopback0
 ip pim sparse-mode
 tunnel source Loopback0
 tunnel destination 150.1.3.3
!
interface Tunnel100
 ip unnumbered Loopback0
 ip pim sparse-dense-mode
 tunnel source Loopback0
 tunnel destination 150.1.9.9
!
interface FastEthernet0/0
 ip address 155.1.146.1 255.255.255.0
 ip pim dr-priority 2
 ip pim sparse-mode
 duplex auto
 speed auto
!
interface FastEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface Serial0/1/0
 no ip address
 encapsulation frame-relay
!
interface Serial0/1/0.1 point-to-point
 ip address 155.1.0.1 255.255.255.0
 ip pim sparse-mode
 ip ospf network non-broadcast
 ip ospf priority 0
 snmp trap link-status
 frame-relay interface-dlci 105  
!
interface Serial0/1/1
 ip address 155.1.13.1 255.255.255.0
 clock rate 2000000
!
router ospf 1
 router-id 150.1.1.1
 log-adjacency-changes
 passive-interface Tunnel31
 passive-interface Tunnel100
 network 150.1.0.0 0.0.255.255 area 0
 network 155.1.0.0 0.0.255.255 area 0
 distance ospf intra-area 88 inter-area 88 external 89
!
ip forward-protocol nd
!
!
ip http server
no ip http secure-server
ip pim autorp listener
ip pim send-rp-discovery Loopback0 scope 10
!
access-list 1 permit 224.0.0.0
!
!
!
!
!
!
control-plane
!
!
!
!
!
!
!
!
!
!
line con 0
 exec-timeout 0 0
 privilege level 15
 logging synchronous
line aux 0
line vty 0 4
 password cisco
 login
!
scheduler allocate 20000 1000
end

R1#sh ip pim int

Address          Interface                Ver/   Nbr    Query  DR     DR
                                          Mode   Count  Intvl  Prior
150.1.1.1        Loopback0                v2/S   0      30     1      150.1.1.1
150.1.1.1        Tunnel31                 v2/S   1      30     1      0.0.0.0
150.1.1.1        Tunnel100                v2/SD  1      30     1      0.0.0.0
155.1.146.1      FastEthernet0/0          v2/S   2      30     2      155.1.146.1
155.1.0.1        Serial0/1/0.1            v2/S   1      30     1      0.0.0.0
R1#sh run | s ip pim
 ip pim sparse-mode
 ip pim sparse-mode
 ip pim sparse-dense-mode
 ip pim dr-priority 2
 ip pim sparse-mode
 ip pim sparse-mode
ip pim autorp listener
ip pim send-rp-discovery Loopback0 scope 10
R1#sh ip pim rp map
PIM Group-to-RP Mappings
This system is an RP-mapping agent (Loopback0)

Group(s) 224.0.0.0/4
  RP 150.1.5.5 (?), v2v1
    Info source: 150.1.5.5 (?), elected via Auto-RP
         Uptime: 00:57:06, expires: 00:02:52
R1#trace 150.1.8.8 sou lo0

Type escape sequence to abort.
Tracing the route to 150.1.8.8

  1 155.1.0.5 28 msec 24 msec 28 msec
  2 155.1.58.8 28 msec *  36 msec

 

 

R5#terminal len 0
R5#sh run
Building configuration...


Current configuration : 2566 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R5
!
boot-start-marker
boot system flash:c2800nm-adventerprisek9-mz.124-15.T10.bin
boot-end-marker
!
!
no aaa new-model
dot11 syslog
!
!
ip cef
!
!
no ip domain lookup
ip multicast-routing
ip multicast rpf interval 6
ip multicast rpf backoff 10 200
!
multilink bundle-name authenticated
!
!
voice-card 0
 no dspfarm
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
archive
 log config
  hidekeys
!
!
!
!
!
!
!
!
interface Loopback0
 ip address 150.1.5.5 255.255.255.0
 ip pim sparse-mode
 ip ospf network point-to-point
!
interface GigabitEthernet0/0
 ip address 155.1.58.5 255.255.255.0
 ip pim dr-priority 2
 ip pim sparse-mode
 ip multicast boundary 1 filter-autorp
 duplex auto
 speed auto
!
interface GigabitEthernet0/1
 ip address 155.1.5.5 255.255.255.0
 duplex auto
 speed auto
!
interface Serial0/0/0
 ip address 155.1.0.5 255.255.255.0
 ip pim nbma-mode
 ip pim sparse-mode
 encapsulation frame-relay
 no fair-queue
 frame-relay map ip 155.1.0.1 501 broadcast
 frame-relay map ip 155.1.0.2 502 broadcast
 frame-relay map ip 155.1.0.3 503 broadcast
 frame-relay map ip 155.1.0.4 504 broadcast
 no frame-relay inverse-arp
!
interface Serial0/0/1
 ip address 155.1.45.5 255.255.255.0
 ip pim sparse-mode
!
router eigrp 100
 redistribute ospf 1 metric 1 1 1 1 1
 passive-interface Serial0/0/0
 network 150.1.0.0
 network 155.1.0.0
 no auto-summary
!
router ospf 1
 router-id 150.1.5.5
 log-adjacency-changes
 redistribute eigrp 100 subnets
 network 150.1.0.0 0.0.255.255 area 0
 network 155.1.0.0 0.0.255.255 area 0
 neighbor 155.1.0.1
 neighbor 155.1.0.2
 neighbor 155.1.0.3
 neighbor 155.1.0.4
 distance ospf external 171
!
ip forward-protocol nd
!
!
ip http server
no ip http secure-server
ip pim autorp listener
ip pim send-rp-announce Loopback0 scope 10
!
ip access-list standard SW4-Group
 deny   224.110.110.110
 permit any
ip access-list standard SW4-RP
 permit 150.1.10.10
!
access-list 1 permit 224.0.0.0
access-list 2 permit 224.110.110.110
access-list 2 permit 224.10.10.10
access-list 3 deny   232.0.0.0 7.255.255.255
access-list 3 permit any
access-list 100 permit ip host 155.1.146.1 any
access-list 100 permit ip host 155.1.146.4 any
!
!
!
route-map Sources deny 10
 match ip address 100
!
route-map Sources permit 1000
!
!
!
!
control-plane
!
!
!
!
!
!
!
!
!
!
line con 0
 exec-timeout 0 0
 privilege level 15
 logging synchronous
line aux 0
line vty 0 4
 password cisco
 login
!
scheduler allocate 20000 1000
!
end

R5#sh ip pim int

Address          Interface                Ver/   Nbr    Query  DR     DR
                                          Mode   Count  Intvl  Prior
150.1.5.5        Loopback0                v2/S   0      30     1      150.1.5.5
155.1.58.5       GigabitEthernet0/0       v2/S   1      30     2      155.1.58.5
155.1.0.5        Serial0/0/0              v2/S   2      30     1      155.1.0.5
155.1.45.5       Serial0/0/1              v2/S   1      30     1      0.0.0.0
R5#sh ip pim rp map
PIM Group-to-RP Mappings
This system is an RP (Auto-RP)

Group(s) 224.0.0.0/4
  RP 150.1.5.5 (?), v2v1
    Info source: 150.1.1.1 (?), elected via Auto-RP
         Uptime: 00:59:20, expires: 00:02:18
R5#sh run | s ip pim
 ip pim sparse-mode
 ip pim dr-priority 2
 ip pim sparse-mode
 ip pim nbma-mode
 ip pim sparse-mode
 ip pim sparse-mode
ip pim autorp listener
ip pim send-rp-announce Loopback0 scope 10
R5#sh ip mroute
IP Multicast Routing Table
Flags: D - Dense, S - Sparse, B - Bidir Group, s - SSM Group, C - Connected,
       L - Local, P - Pruned, R - RP-bit set, F - Register flag,
       T - SPT-bit set, J - Join SPT, M - MSDP created entry,
       X - Proxy Join Timer Running, A - Candidate for MSDP Advertisement,
       U - URD, I - Received Source Specific Host Report,
       Z - Multicast Tunnel, z - MDT-data group sender,
       Y - Joined MDT-data group, y - Sending to MDT-data group
Outgoing interface flags: H - Hardware switched, A - Assert winner
 Timers: Uptime/Expires
 Interface state: Interface, Next-Hop or VCD, State/Mode

(*, 224.10.10.10), 01:00:08/00:03:15, RP 150.1.5.5, flags: S
  Incoming interface: Null, RPF nbr 0.0.0.0
  Outgoing interface list:
    Serial0/0/0, 155.1.0.1, Forward/Sparse, 01:00:08/00:03:15

(*, 224.110.110.110), 01:00:08/00:03:25, RP 150.1.5.5, flags: S
  Incoming interface: Null, RPF nbr 0.0.0.0
  Outgoing interface list:
    Serial0/0/0, 155.1.0.3, Forward/Sparse, 01:00:08/00:03:25

(*, 224.6.6.6), 00:14:48/00:03:26, RP 150.1.5.5, flags: S
  Incoming interface: Null, RPF nbr 0.0.0.0
  Outgoing interface list:
    Serial0/0/1, Forward/Sparse, 00:14:48/00:03:26

(*, 239.9.9.9), 01:00:09/00:03:24, RP 150.1.5.5, flags: S
  Incoming interface: Null, RPF nbr 0.0.0.0
  Outgoing interface list:
    Serial0/0/0, 155.1.0.1, Forward/Sparse, 01:00:09/00:03:24

(*, 224.4.4.4), 00:15:23/00:03:23, RP 150.1.5.5, flags: S
  Incoming interface: Null, RPF nbr 0.0.0.0
  Outgoing interface list:
    Serial0/0/1, Forward/Sparse, 00:15:23/00:03:23

(*, 224.0.1.39), 01:21:36/stopped, RP 0.0.0.0, flags: DCL
  Incoming interface: Null, RPF nbr 0.0.0.0
  Outgoing interface list:
    Serial0/0/1, Forward/Sparse, 01:21:36/00:00:00
    Serial0/0/0, Forward/Sparse, 01:21:36/00:00:00

(150.1.8.8, 224.0.1.39), 00:02:02/00:00:57, flags: PLTX
  Incoming interface: GigabitEthernet0/0, RPF nbr 155.1.58.8
  Outgoing interface list: Null

(150.1.10.10, 224.0.1.39), 00:02:05/00:00:54, flags: PLTX
  Incoming interface: GigabitEthernet0/0, RPF nbr 155.1.58.8
  Outgoing interface list: Null

(150.1.5.5, 224.0.1.39), 01:00:10/00:03:18, flags: PLT
  Incoming interface: Loopback0, RPF nbr 0.0.0.0
  Outgoing interface list:
    Serial0/0/0, Prune/Sparse, 00:05:11/00:02:26
    Serial0/0/1, Prune/Sparse, 00:02:04/00:00:55

(*, 224.0.1.40), 01:23:43/stopped, RP 0.0.0.0, flags: DCL
  Incoming interface: Null, RPF nbr 0.0.0.0
  Outgoing interface list:
    Serial0/0/0, Forward/Sparse, 01:21:46/00:00:00
    Serial0/0/1, Forward/Sparse, 01:22:03/00:00:00
    Loopback0, Forward/Sparse, 01:23:43/00:00:00

(150.1.1.1, 224.0.1.40), 01:00:10/00:02:36, flags: LT
  Incoming interface: Serial0/0/0, RPF nbr 155.1.0.1
  Outgoing interface list:
    Loopback0, Forward/Sparse, 01:00:10/00:00:00
    Serial0/0/1, Forward/Sparse, 01:00:10/00:00:00

R5#!for some reason R5 is not forwarding 224.0.1.40 out of g0/0

 

 

SW2#terminal le 0
SW2#sh run
Building configuration...

Current configuration : 5209 bytes
!
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname SW2
!
boot-start-marker
boot-end-marker
!
!
!
!
no aaa new-model
system mtu routing 1500
vtp domain cisco
vtp mode transparent
ip routing
no ip domain-lookup
!
!
ip multicast-routing distributed
!
!
crypto pki trustpoint TP-self-signed-729430400
 enrollment selfsigned
 subject-name cn=IOS-Self-Signed-Certificate-729430400
 revocation-check none
 rsakeypair TP-self-signed-729430400
!
!
crypto pki certificate chain TP-self-signed-729430400
 certificate self-signed 01
  3082023A 308201A3 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
  30312E30 2C060355 04031325 494F532D 53656C66 2D536967 6E65642D 43657274
  69666963 6174652D 37323934 33303430 30301E17 0D393330 33303130 30303130
  325A170D 32303031 30313030 30303030 5A303031 2E302C06 03550403 1325494F
  532D5365 6C662D53 69676E65 642D4365 72746966 69636174 652D3732 39343330
  34303030 819F300D 06092A86 4886F70D 01010105 0003818D 00308189 02818100
  A2E4A698 FC64673C 778C8652 32FAAE28 32A963D2 1F28C4B5 26D4A284 E6EC470E
  AA341179 7DDBD03B 9F0249DB 20DA51A0 93940595 E07B4402 BFDEDDD0 118A74D1
  ADDA15FB 582C6510 E80D426F 63FE1987 78BC81C8 68A6B518 4DF154F1 E5308E97
  CB8AF790 D8F05E6D FF81044E D0F40194 3736E464 6AA2390F B574920F 08ED9395
  02030100 01A36430 62300F06 03551D13 0101FF04 05300301 01FF300F 0603551D
  11040830 06820453 57322E30 1F060355 1D230418 30168014 10D0E833 9BB75F60
  556AE304 ADC9EB8A EE809963 301D0603 551D0E04 16041410 D0E8339B B75F6055
  6AE304AD C9EB8AEE 80996330 0D06092A 864886F7 0D010104 05000381 81000C6D
  335295F8 B83EF24A F1C71B96 B3AD37CD 1B744457 1142016A E86E6A5E CE6F74C5
  A23171A9 94EE831E F9A72881 8ABFD8F3 2E59C000 A7C65544 F7190126 C11AD5D0
  BBA7D808 3BC95013 FCBCEAC2 B68A248D 1303CB11 C6565B47 AC67A44F DD5E1572
  FEA500F5 FF3DA920 A9C8F9D9 7D7AD96F 656E2278 CE234075 EAA7039A 14F6
  quit
!
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
vlan 3-5,7-10,13,22,32,43,45,52-53,58,67,79,146,1001
!
!
!
!
interface Loopback0
 ip address 150.1.8.8 255.255.255.0
 ip pim sparse-mode
!
interface Port-channel1
 no switchport
 ip address 155.1.108.8 255.255.255.0
 ip pim sparse-mode
!
interface FastEthernet0/1
!
interface FastEthernet0/2
 switchport access vlan 22
 switchport mode access
 spanning-tree portfast
!
interface FastEthernet0/3
!
interface FastEthernet0/4
 switchport access vlan 43
 switchport mode access
 spanning-tree portfast
!
interface FastEthernet0/5
!
interface FastEthernet0/6
 switchport trunk encapsulation dot1q
 switchport mode trunk
!
interface FastEthernet0/7
!
interface FastEthernet0/8
!
interface FastEthernet0/9
!
interface FastEthernet0/10
!
interface FastEthernet0/11
!
interface FastEthernet0/12
!
interface FastEthernet0/13
 switchport mode dynamic desirable
!
interface FastEthernet0/14
 switchport mode dynamic desirable
!
interface FastEthernet0/15
 switchport mode dynamic desirable
!
interface FastEthernet0/16
 switchport mode dynamic desirable
!
interface FastEthernet0/17
 switchport mode dynamic desirable
!
interface FastEthernet0/18
 switchport mode dynamic desirable
!
interface FastEthernet0/19
 no switchport
 no ip address
 channel-group 1 mode on
!
interface FastEthernet0/20
 no switchport
 no ip address
 channel-group 1 mode on
!
interface FastEthernet0/21
 switchport mode dynamic desirable
!
interface FastEthernet0/22
!
interface FastEthernet0/23
!
interface FastEthernet0/24
 switchport access vlan 22
 switchport mode access
 spanning-tree portfast
!
interface FastEthernet0/25
!
interface FastEthernet0/26
!
interface FastEthernet0/27
!
interface FastEthernet0/28
!
interface FastEthernet0/29
!
interface FastEthernet0/30
!
interface FastEthernet0/31
!
interface FastEthernet0/32
!
interface FastEthernet0/33
!
interface FastEthernet0/34
!
interface FastEthernet0/35
!
interface FastEthernet0/36
!
interface FastEthernet0/37
!
interface FastEthernet0/38
!
interface FastEthernet0/39
!
interface FastEthernet0/40
!
interface FastEthernet0/41
!
interface FastEthernet0/42
!
interface FastEthernet0/43
!
interface FastEthernet0/44
!
interface FastEthernet0/45
!
interface FastEthernet0/46
!
interface FastEthernet0/47
!
interface FastEthernet0/48
!
interface GigabitEthernet0/1
!
interface GigabitEthernet0/2
!
interface GigabitEthernet0/3
!
interface GigabitEthernet0/4
!
interface Vlan1
 no ip address
!
interface Vlan8
 ip address 155.1.8.8 255.255.255.0
 ip pim sparse-mode
!
interface Vlan58
 ip address 155.1.58.8 255.255.255.0
 ip pim sparse-mode
!
!
router eigrp 100
 network 150.1.0.0
 network 155.1.0.0
!
ip classless
ip http server
ip http secure-server
!
ip pim autorp listener
ip pim send-rp-announce Loopback0 scope 10 group-list 3
!
access-list 1 permit 224.0.0.0
access-list 2 permit 224.110.110.110
access-list 2 permit 224.10.10.10
access-list 3 deny   224.110.110.110
access-list 3 permit 224.0.0.0 7.255.255.255
access-list 3 permit 224.0.0.0 15.255.255.255
!
!
!
line con 0
 exec-timeout 0 0
 privilege level 15
 logging synchronous
line vty 0 4
 password cisco
 login
line vty 5 15
 login
!
end

SW2#sh ip pim int

Address          Interface                Ver/   Nbr    Query  DR     DR
                                          Mode   Count  Intvl  Prior
150.1.8.8        Loopback0                v2/S   0      30     1      150.1.8.8
155.1.108.8      Port-channel1            v2/S   1      30     1      155.1.108.10
155.1.8.8        Vlan8                    v2/S   0      30     1      155.1.8.8
155.1.58.8       Vlan58                   v2/S   1      30     1      155.1.58.5
SW2#sh ip pim rp map
PIM Group-to-RP Mappings
This system is an RP (Auto-RP)

SW2#!no RP info
SW2#sh ip mroute
IP Multicast Routing Table
Flags: D - Dense, S - Sparse, B - Bidir Group, s - SSM Group, C - Connected,
       L - Local, P - Pruned, R - RP-bit set, F - Register flag,
       T - SPT-bit set, J - Join SPT, M - MSDP created entry,
       X - Proxy Join Timer Running, A - Candidate for MSDP Advertisement,
       U - URD, I - Received Source Specific Host Report,
       Z - Multicast Tunnel, z - MDT-data group sender,
       Y - Joined MDT-data group, y - Sending to MDT-data group
       V - RD & Vector, v - Vector
Outgoing interface flags: H - Hardware switched, A - Assert winner
 Timers: Uptime/Expires
 Interface state: Interface, Next-Hop or VCD, State/Mode

(*, 224.0.1.39), 01:26:10/stopped, RP 0.0.0.0, flags: DC
  Incoming interface: Null, RPF nbr 0.0.0.0
  Outgoing interface list:
    Vlan58, Forward/Sparse, 01:24:43/00:00:00
    Port-channel1, Forward/Sparse, 01:26:08/00:00:00

(150.1.10.10, 224.0.1.39), 01:25:09/00:02:34, flags: T
  Incoming interface: Port-channel1, RPF nbr 155.1.108.10
  Outgoing interface list:
    Vlan58, Forward/Sparse, 01:24:44/00:00:00

(150.1.8.8, 224.0.1.39), 01:26:11/00:02:26, flags: T
  Incoming interface: Loopback0, RPF nbr 0.0.0.0
  Outgoing interface list:
    Vlan58, Forward/Sparse, 01:24:44/00:00:00
    Port-channel1, Prune/Sparse, 00:00:34/00:02:32

(*, 224.0.1.40), 01:26:11/00:02:53, RP 0.0.0.0, flags: DCL
  Incoming interface: Null, RPF nbr 0.0.0.0
  Outgoing interface list:
    Vlan58, Forward/Sparse, 01:24:44/00:00:00
    Port-channel1, Forward/Sparse, 01:26:08/00:00:00
    Loopback0, Forward/Sparse, 01:26:12/00:00:00

SW2#sh run | i ip pim
 ip pim sparse-mode
 ip pim sparse-mode
 ip pim sparse-mode
 ip pim sparse-mode
ip pim autorp listener
ip pim send-rp-announce Loopback0 scope 10 group-list 3


Viewing all articles
Browse latest Browse all 10744

Trending Articles