2.1 Router Rip does not start RIP

Hello,

I am using real lab at INE. On router R6 I cannot start RIP. I even reloaded the router. Any ideea?

Rack11R6#sh ip protocols
Routing Protocol is "bgp 200"
  Outgoing update filter list for all interfaces is not set
  Incoming update filter list for all interfaces is not set
  IGP synchronization is disabled
  Automatic route summarization is disabled
  Neighbor(s):
    Address          FiltIn FiltOut DistIn DistOut Weight RouteMap
    192.10.11.1                                         
  Maximum path: 1
  Routing Information Sources:
    Gateway         Distance      Last Update
    192.10.11.1          200      00:14:05
  Distance: external 20 internal 200 local 200

Rack11R6#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Rack11R6(config)#router rip
Rack11R6(config-router)#ver
Rack11R6(config-router)#version 2
Rack11R6(config-router)#no asu
Rack11R6(config-router)#no au
Rack11R6(config-router)#no auto-summary
Rack11R6(config-router)#exit
Rack11R6(config)#exit
Rack11R6#sh ip pr
*May 23 05:07:51.951: %SYS-5-CONFIG_I: Configured from console by console
Rack11R6#sh ip proto
Rack11R6#sh ip protocols
Routing Protocol is "bgp 200"
  Outgoing update filter list for all interfaces is not set
  Incoming update filter list for all interfaces is not set
  IGP synchronization is disabled
  Automatic route summarization is disabled
  Neighbor(s):
    Address          FiltIn FiltOut DistIn DistOut Weight RouteMap
    192.10.11.1                                         
  Maximum path: 1
  Routing Information Sources:
    Gateway         Distance      Last Update
    192.10.11.1          200      00:14:23
  Distance: external 20 internal 200 local 200

Rack11R6#

Razvan