More NAT issues
More NAT behaviour problems I have been hitting NAT hard as it is a tricky subject. I was following a blog post that looked like a fairly simple excercise which I labbed up and found some more odd...
View ArticleQuestion 9.15 EIGRPv6 Metric Manipulation
I did everything that was asked of this section, except modify the metric weights to only reflect delay. I don't understand where the requirement states or hints that I must modify the traditional...
View Article9.31 ISATAP tunneling
I dont understand this task at all... It mentions R1, SW1 and SW2 but shows no configuration for themAlso, with ISATAP don't we need to do a 'no ipv6 nd suppress-ra' on the tunnel interfaces?Perhaps...
View ArticleWhat order to take the CCNP path
Hi all, I just bought the INE CCNP self-study bootcamp I was planning on taking the Route exam first followed by Switch and finally TShoot. What is the best order to take these exams in? I just see...
View ArticleSTP | Portfast and BPDUFilter
Can someone confirm something for me;Is this a correction deduction?*If* a port is in “portfast” mode, and *if* a BDPU is received on that port, it will revert out of “portfast” mode but will not...
View ArticleNew PfR vSeminar recordings
Hello all,has anyone heard anything about when the recordings for the new PfR vSemirar are going to be released to AAP members? This will sure be a great addition to the AAP catalogue =) Thanks
View ArticleRelease of CCIE Security V4 Materials
Hi,Just wondering if INE have any plans for the release of the new CCIE Security blueprint materials any target date?
View Articleip prefix list
hi I need to study deeply that topic ip prefix-list in order to use it in ospf with the cde distribut-list prefix prefix nameI see that link http://blog.ine.com/2007/12/26/how-do-prefix-lists-work/and...
View ArticleIdle too long
I could be typing constant the entire time on a router or switch and I still get this: Rack1R1#conf tEnter configuration commands, one per line. End with CNTL/Z.Rack1R1(config)#r[Connection to r1 idle...
View ArticleTLV in EIGRP
I know TLV stands for Time, Length and Value. I also understand that:The Version field in EIGRP packet headers is actually a protocol discriminator: a value of 1 would mean IGRP, the value 2 means...
View ArticleDCI
Hi,what is the best way to interconnect 3 data centers..., partial mesh or full mesh.we have CWDM/DWDM between 3 DCs and layer-3 links to ISP which will serve as backup 100mbps links.Is DC-A to be...
View Article2.4 ( R5 should see prefix as follows )
IN my solution I only provided the route-map with weight attribute set for my connection to R2. The SG has the route-map tied to R2, and R1. The output of the question states.weight = 100 AS Path =...
View ArticleLab 20 task 1.2 & 1.3 Missing Config
How we are applying configuration in task 1.2 and 1.3. I dont see any configuration in the script. Very confuse how everyone is getting around this problem
View ArticleTicket #2
Hi,For this ticket, I applied leak-map on R6 since I wanna to avoid ant removal of the intial configuration.Any comments?
View ArticleWho's from the Philippines?
Hey Gents,Just want to know who's from the Philippines here at IEOC? I am currently in the Philippines preparing for th lab exam on October, maybe you want to have a chat, talking about anything from...
View ArticleIt's got to be somthing simple.. Can't get VPN up to Voice Rack
Hello, I have an issue connecting to the voice racks, the setup is via the layer 2 vpn guide in the rack rental guide, I have pasted in everything to ensure I havn't missed anything and I am pulling my...
View Article[mpls vpn routing tables: should they be complete?]
hi, guys:i'm in full paranoid lab mode right now, obsessing over details that i'm not sure matter anymore...as far as i'm concerned, when doing mpls vpn, interAS vpn, CSC, etc...all these magic things...
View ArticleLab. 3 2.1
Have I missed something all my life.My solution for this was a simple frame-relay map ip... on R2 and R4, this meant they would use R5, to reach each other, and leave the network type alone.This was a...
View ArticleMonitor individual IPsec VPN tunnels on ASA
Let's say I have 5 IPsec Site-to-Site VPN tunnels configured on HQ ASA connected to 5 branch offices.Is there any Cisco or third party tools that can monitor each VPN tunnel and generate statistic data...
View Article